Sony PlayStation Move CECH-ZCS1R - Navigation Controller Manual

Precautions

Before using this product, carefully read this manual and retain it for future reference. Read also the instructions for the PlayStation®3 system.

• When using the navigation controller, be aware of the following points. If the navigation controller hits a person or an object, it may cause accidental injury or damage.
• When disposing of the navigation controller, carefully follow the precautions listed below:
• If you come into contact with material from a leaking battery, take the following actions:

Use and handling

• Follow the instructions below to help prevent the product exterior from deteriorating or becoming discoloured.

About PlayStation® Move products

PlayStation®Move products work together to track and react to your physical movement for more direct and intuitive operation.

Hints

Part names

Front view

^{* 1} The left stick works in the same way as the left stick of the DUALSHOCK ® 3 wireless controller.
^{* 2} The L3 button functions when the left stick is pressed.

Rear view

Bottom view

Preparing for use

Checking the version of the PS3™ system software
To use the navigation controller, the PS3™ system software must be version 3.40 or later. You can check the system software version by selecting (Settings) (System Settings) [System Information] on the XMB_™ (XrossMediaBar) menu of the PS3™ system.

Pairing the navigation controller and the PS3™ system
Before using the navigation controller, you must first register or "pair" the navigation controller and the PS3™ system. You only need to do this the first time you use the navigation controller.

1. Turn on the PS3™ system.
2. Connect the navigation controller to the PS3™ system using a USB cable.
3. Press the PS button on the navigation controller.
   The navigation controller is paired with the PS3™ system.

Hints

Charging the navigation controller

To use the navigation controller, its battery must be charged. With the PS3™ system turned on (power indicator is lit solid green), connect the navigation controller to the system using a USB cable. The status indicator of the navigation controller flashes slowly and charging begins. The status indicator stops flashing when charging is complete.

Hints

Using the navigation controller

Using the controller
Notice
Do not use the navigation controller while it is connected to the PS3™ system with a USB cable, as this restricts motion. Use in this manner could also result in damage to the connector or injury if the USB cable is suddenly pulled from the PS3™ system.

1. Turn on the PS3™ system.
2. Press the PS button on the navigation controller.
   A number is automatically assigned to the navigation controller.

Hints

• To quit a game, press the PS button on the navigation controller, and then select (Game) (Quit Game).

Adjusting the navigation controller's settings
You can change settings for the navigation controller by selecting (Settings) (Accessory Settings) on the XMB_™ menu of the PS3™ system.

• Reassign Controllers
  If a port or number for the navigation controller is specified by the software, you can use this setting to assign the appropriate controller port or number.

Hints

• You can change settings during gameplay by pressing the PS button on the navigation controller. Select (Settings) (Accessory Settings) on the XMB_™ menu, or select [Controller Settings] from the screen that is displayed when you press the PS button.

Troubleshooting

Go through this section if you experience difficulty in operating the navigation controller. Should any problem persist, visit http://eu.playstation.com/help-support

The navigation controller operates in an abnormal manner, or cannot be used as intended.
Try resetting the navigation controller by pushing the reset button on the controller rear with a thin-tipped object such as a pen.

The navigation controller does not function.
The navigation controller must be paired with the PS3™ system through a controller number assigned by the system or software. With the system turned on (power indicator is lit solid green), connect the system and the navigation controller using a USB cable, and then press the PS button on the navigation controller.
Check the charge level of the navigation controller battery. The navigation controller will not function if the battery does not have any charge left. Charge the battery by connecting the navigation controller to the system using a USB cable.

The battery does not charge or does not fully recharge.
The battery can only be charged when the PS3™ system is turned on (power indicator is lit solid green).

When disposing of the navigation controller

When disposing of the navigation controller, remove the battery and follow local regulations regarding disposing of batteries.

Notice
Other than when disposing of the navigation controller, never remove the screws and never remove the battery from the navigation controller.

1. Disconnect the USB cable from the navigation controller.
2. Using a crosshead screwdriver, remove the screws from the navigation controller rear (four places), and then remove the casing.
   
   
3. Pull out the battery.
   
   
4. Remove the battery holder from the navigation controller.
   
5. Unplug the connector to remove the battery.
   

Specifications

Design and specifications are subject to change without notice.

GUARANTEE
This product is covered for 12 months from date of purchase by the manufacturer's warranty set out in the PS3™ system manual. Please refer to the PS3™ system manual for full details.
The manufacturer of this product is Sony Computer Entertainment Inc., 2-6-21 MinamiAoyama, Minato-ku Tokyo, 107-0062 Japan.
This product may fall within the scope of national export control legislation. You must comply fully with the requirements of such legislation and of all other applicable laws of any jurisdiction in relation to this product.