Table of Contents
FLEXIDOME IP 3000i IR | FLEXIDOME IP micro
3000i | DINION IP 3000i IR | FLEXIDOME IP turret
3000i IR
To load configuration data from the computer to the device:
1.
2.
3.
To save the camera settings:
1.
2.
3.
Maintenance log
Download an internal maintenance log from the device to send it to Customer Service for
support purposes. Click Download and select a storage location for the file.
4.8.2
Licenses
This window activates more functions with use of an Activation key. An overview of the
Installed licenses is shown. Also, the Installation code of the unit is shown.
Click Set to apply the changes.
4.8.3
Certificates
Add a certificate/file to the file list
Click Add.
In the Add certificate window, select:
–
–
–
Note: When using certificates for mutual authentication, the device must use a solid and
trusted time base. In case the time differs too much from the actual time, a client can be
locked out. Then, only a reset to factory defaults will access to the device again.
Delete a certificate from the file list
Click the trashcan icon to the right of the certificate. The Delete file window appears. To
confirm deletion, click OK. To cancel deletion, click Cancel.
Note: You can only delete certificates that you have added; you cannot delete the default
certificate.
Download a certificate
Click on the download icon and a window opens with base64 encoded text of the certificate.
Click Set to apply the changes.
Bosch Security Systems B.V.
Click Browse.... A dialog box appears.
Make certain that the file to be loaded comes from the same device type as the device to
be reconfigured.
Locate and open the desired configuration file. If the configuration file is password-
protected, enter the password.
Click Upload.
The progress bar allows monitoring of the transfer. The time remaining is shown by the
message going to reset Reconnecting in ... seconds. When the upload is completed
successfully, the device reboots automatically.
Click Download. A dialog box appears.
Enter a password to protect the configuration file.
Enter a file name if required and save the file.
Upload certificate to select a file that is available:
–
Click Browse... to navigate to the necessary file.
–
Click Upload.
Generate signing request for a signing authority to create a new certificate:
–
Fill in all the necessary fields.
–
Click Generate.
Generate certificate to create a new self-assigned certificate:
–
Fill in all the necessary fields.
–
Click Generate.
User manual
Configuration | en
51
2023-01 | V04 |
Hide quick links:
Table of Contents
