Table of Contents
Installing the HP 84125A/B System
Note
3-4 System Setup and Functional Tests
The following procedure will assist you with installing your
HP 84125A/B system.
Assembling the Test Mobile Instrument Cart
1. From the largest carton, carefully remove the cart from its
shipping container and the items contained in the space between
the drawer and the upper shelf of the cart.
The instrument strap will not be used for this installation.
2. Assemble the casters (that is,wheels) and the cart handle to the
cart as shown in the HP 1182A Testmobile Instrument Cart and
Accessories Operating Guide.
Installing the EMC Analyzer
Refer to Figure 3-1 to assist you with the following procedure.
1. Remove the EMC analyzer from the medium-sized carton.
2. Remove the packet of hardware from the top shelf of the cart. The
hardware will be used to assemble the system.
3. To attach the EMC analyzer onto the metal bracket on top of the
shelf:
a. Center the analyzer over the bracket with the front end of the
analyzer tilted upwards.
Table of Contents
