Page 2
Important! It is essential that you read the instructions in this manual before assembling, operating and maintaining the product. Subject to technical modifications.
Page 3
1. Auxiliary handle, insulated gripping surface 8. LED light 2. Gear selector 9. Battery port 3. Torque adjustment ring 10. Screw 4. Keyless chuck 11. Driver bit 5. Direction of rotation selector 12. Bit holder 6. Variable speed switch trigger 13.
= 1.7 m/s Uncertainty K 1.5 m/s * test to AEG standard N 877318 WARNING! The vibration emission level given in this information sheet has been measured in accordance with a standardised test given in EN 62841 and may be used to compare one tool with another. It may be used for a preliminary assessment of exposure.
L1840R could trigger a sudden recoil with a high reactive force. Determine Use AEG 18V battery and charger only why the accessory stalled and rectify this, paying heed to the safety WARNING! Read all safety warnings, instructions, illustrations instructions.
Avoid extended exposure to heat or sunshine (risk need to be replaced which have not been described, please contact of overheating). one of our AEG service agents (see our list of guarantee/service The contacts of chargers and battery packs must be kept clean. addresses).
Page 20
petroleum-based products, penetrating oils, etc., come in contact with plastic parts. Chemicals can damage, weaken or destroy plastic which could result in serious personal injury. Techtronic Industries Australia Pty Ltd PO Box 1065 Mount Waverley VIC 3149 Tel. no. 1300 234 797 Australia Techtronic Industries N.Z.