Related Manuals for Mitsubishi Electric DX-ZD5UEZ
Summary of Contents for Mitsubishi Electric DX-ZD5UEZ
- Page 1 HDD Extension Unit INSTALLATION AND OPERATION MANUAL MODEL DX-ZD5UE(Z) THIS INSTRUCTION MANUAL IS IMPORTANT TO YOU. PLEASE READ IT BEFORE USING YOUR HDD EXTENSION UNIT.
- Page 2 WARNING: REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION: TO PREVENT ELECTRIC SHOCK DO NOT USE THIS (POLARIZED) PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.
- Page 3 AVERTISSEMENT: La flèche symbolisant l’éclair dans un triangle équilateral a pour objet de tirer l’attention de l’utilisateur sur le fait, qu’il y a des “tensions dangereuses” non-isolées à l’intérieur de l’enceinte du produit qui peuvent être suffisamment importantes pour conduire au risque d’électrocution.
-
Page 4: Important Safeguards
Important safeguards PLEASE READ ALL THESE INSTRUCTIONS REGARDING YOUR HDD EXTENSION UNIT AND RETAIN FOR FU- TURE REFERENCE. FOLLOW ALL WARNINGS AND INSTRUCTIONS MARKED ON THE HDD EXTENSION UNIT. 1. Read Instructions All the safety and operating instructions should be read before the appliance is operated. - Page 5 16.Servicing Do not attempt to service this product yourself as opening or removing covers may expose you to dan- gerous voltage or other hazards. Refer all servicing to qualified service personnel. 17.Damage requiring Service Unplug this product from the wall outlet and refer serv- icing to qualified service personnel under the follow- ing conditions: (a) When the power-supply cord or plug is damaged.
-
Page 6: Caution And Care
Caution and care HEAVY OBJECTS SHOULD NEVER BE PLACED ON THE UNIT (E.G., MONITOR) NEVER TOUCH OR INSERT ANY OBJECT INSIDE THE UNIT Touching the inside of the cabinet or inserting foreign objects of any kind through the ventilation holes not only creates a safety hazard but can also cause extensive damage. - Page 7 This unit records images digitally. When recording copyrighted images, be careful not to infringe their copyrights. Disclaimer In any event, Mitsubishi assumes no responsibility or reliability for the following: 1. Disassembly, repair, or alteration of this unit by user or installer.
-
Page 8: Table Of Contents
Contents Important safeguards ... i-iv Caution and care ... 2-3 Contents ... 4 Major operations and their functions ... 5-6 Front view ... 5 Rear view ... 6 Connections ... 7 -13 1. Connectable recorders ... 7 2. Connection example ... 7 3. -
Page 9: Major Operations And Their Functions
Major operations and their functions Front view HDD EXTENSION UNIT DX-ZD5 1. POWER indicator When the EXTERNAL CONTROL switch is set to OFF, or it is set to ON with the connected recorder turned on, this indicator illuminates while the MAIN switch on the rear panel is turned on. -
Page 10: Rear View
Major operations and their functions Rear view MAIN AC IN 100-240V 1. MAIN switch This is the main power switch. When using this unit, set this switch to ON. 2. AC power socket Used to connect the power cord. Earth terminal is used for safety. -
Page 11: Connections
Connections 1. Connectable recorders MITSUBISHI DIGITAL RECORDER DX-TL5000U, DX-TL5000E 2. Connection example • Connect this unit and a digital recorder by using the supplied USB cable. • It is possible to connect some DX-ZD5UE(Z), as shown below. Digital recorder DX-TL5000U or DX-TL5000E... -
Page 12: Startup
Connections 3. Startup 1. Turn on the power of this unit. step 2. Turn on the main switch of the recorder. step The POWER indicator of this unit illuminates. 3. After “POWER OFF” is displayed on the LCD of the recorder, press the POWER button of the recorder. step 4. - Page 13 User Menu Copy Copy Data to Copy 1 Drive 1 + 2 Range of Copy Set Copy 1 Drive 1. Set the camera number to be copied. step • The button function changes between “All Off” and “All On” each time you select this button. You can switch on and off for all the cameras easily by using this button.
-
Page 14: Setting
Connections • “LPA” appears for “From Main” when “Long Pre-Alarm Area” (System Menu Memory Data Management Setting for Main Memory Change Partition Setting) is set to other than “0 %” in the recorder. 3. Set the start time of copy. step Start: Sets the start point of copy. - Page 15 2. Remove the screws. step 3. Remove the front covers. step • Remove the cover on the right side first. • Then, push the left side cover to the right to remove. 4. Disconnect the cord connected to the circuit board step on the metal part.
- Page 16 Connections 11. Attach the metal part. step • Adjust the upper side first, then push the lower side into the unit. • Take care not to deform the springs. 12. Fix the metal part with four screws. step 13. Connect the cord to the circuit board on the metal step part.
-
Page 17: Troubleshooting
6. Troubleshooting If problems with the unit persist even after you’ve followed the suggestions below, please disconnect the power cord and contact the retailer from whom you purchased the unit. Description of problem Please consult the following The unit is not turned on. •... -
Page 18: Recording Time Table
Recording time table Continuous recording time table HDD continuous recording time Displays the estimated recordable time (when recording on two 250 GB HDDs). • The following table shows the total number of recordable frames of all the cameras which are set for recording. •... - Page 19 • With audio recording
-
Page 20: Without Audio Recording
Recording time table • When recording data in PAL system • Without audio recording Number of frames /sec. Picture grade Super 1d9h Fine 1d15h High 1d23h Standard 1d6h 2d12h Basic 1d17h 3d11h Long 2d18h 5d13h Number of frames /sec. Picture grade Super 13d20h 17d7h... - Page 21 • With audio recording
-
Page 22: Specifications
Specifications General Rated Power Supply: Rated Input: Operating Temperature: Relative Humidity: Altitude: Dimensions: Weight: Control terminals CONT IN CONT OUT GND (Ground) TEMP ALM FAN ALM EXTERNAL CONTROL: When set to ON: When set to OFF: Serial bus terminal Serial bus terminal (2 terminals) Accessories: Control input/output terminals and circuits TEMP ALM terminal... - Page 23 Paracelso 12, 20041 Agrate Brianza, Italy Telephone: +39 (039)-605 31 Fax: + 39 (039)-605 3214 The Netherlands Mitsubishi Electric Benelux A Division of Mitsubishi Electric Europe B.V. Niiverheidsweg 23A, 3641 RP Mijdrecht Netherlands. Telephone: +31 (297)-282 461 Fax: +31 (297)-283 936...