4. HL 640-2 USB INTERFACE DRIVER SETUP
In order to download the ChronoSplit data on your PC, you have to install the plug & play interface
drivers and the download software.
Follow carefully the different steps described below and you'll be able to analyze all the data you collected
during your trainings efficiently on a PC.
1. Plug the USB Interface in a USB port of your computer
The standard Windows plug & play wizard will detect the presence of the new unknown device and will ask
for the setup of the appropriate drivers.
The wizard will detect 4 devices.
1. Dual RS232 (FT2232C Channel A)
2. Dual RS232 (FT2232C Channel B)
3. USB Serial Port
4. USB Serial Port
2. Setup the drivers
You will have to repeat 4 times the procedure described below to install the 4 drivers.
Be careful to follow it step by step.
The screenshots and the procedure described below are valid for Windows XP. On older versions of
Windows, the wizard windows are different but the process is mostly identical.
Device 1 : FT2232C Channel A
Select "No"
Click on "Next"
Select "Install from a list or specific
location (Advanced)
Click on "Next"
7
