Filters (E); General About Emc Filtering; Definitions; Emc Filter (E200) - ABB ACS800-07 Manual

The EMC filter options protect the drive and equipment connected to the electrical

power system against radio-frequency interference. This means that the drive

operates without problems and does not disturb or interfere with any other product or

system within its locality.

EMC stands for electromagnetic compatibility.

First environment includes establishments connected to a low-voltage network which supplies buildings

used for domestic purposes.

Second environment includes establishments connected to a network not supplying domestic

premises.

Drive of category C2: drive of rated voltage less than 1000 V and intended to be installed and

commissioned only by a professional when used in the first environment.

Drive of category C3: drive of rated voltage less than 1000 V and intended for use in the second

environment and not intended for use in the first environment.

Drive of category C4: drive of rated voltage equal to or above 1000 V, or rated current equal to or above

400 A, or intended for use in complex systems in the second environment.

TN system means a grounded electrical power system. IT system means an ungrounded electrical

power system.

More information: Technical Guide No. 3 – EMC Compliant Installation and

Configuration for a Power Drive System (3AFE61348280 [English])

This option provides electromagnetic compatibility for drives of category 3 in TN

(grounded) systems.

Option for ACS800-07 frame R5 and ACS800-U7/17/37 frame R6.

Not available for

• ACS800-07 frames R6 to R8 and n×R8i

• ACS800-U7 frames R6 to R8

• ACS800-17/37 frames R7i, R8i and n×R8i.

19

Filters (E)