Table of Contents
Quick Links
Kl30230 R
e
s
evolvING
NGINe
tANd
OPERATING INSTRUCTIONS
WARNING: R
I
c
p
u
eAd
NstRuctIoNs
ompletely
RIoR to
se
315 Garden Avenue • Holland, MI 49424
klineindustries.com • 1-800-824-KLINE (5546) • [email protected]
Table of Contents
Summary of Contents for K-Line KL30230
- Page 1 Kl30230 R evolvING NGINe tANd OPERATING INSTRUCTIONS WARNING: R NstRuctIoNs ompletely RIoR to 315 Garden Avenue • Holland, MI 49424 klineindustries.com • 1-800-824-KLINE (5546) • [email protected]...
-
Page 2: Intended Uses
NtRoductIoN This manual contains information to help you learn about the safe and proper use of the K-Line® Revolving Engine Stand. K-Line® Industries, Inc. cannot anticipate all conceivable or unique situations. The instructions and warnings included in this manual are not necessarily all-inclusive. You must make sure all conditions and procedures do not jeopardize your personal safety. - Page 3 DO NOT leave tools or use of this tool and components laying around the work area. Clean supporting of the load. Make sure the K-Line up all spilled fluids immediately. Use caution when Engine Stand is used only on a flat ,dry, level, and walking around the stand.
-
Page 4: P Rohibited A Ction
Do not modify the K-Line® Engine To avoid serious or fatal injury, only Stand in any way by welding, heating, use the K-Line® Engine Stand for its drilling, machining, or grinding. intended purpose, which is holding, rotating, and lifting engines within the WLL and requirements detailed in this manual and on equipment labels. - Page 5 CENTERLINE OF ENGINE 635MM (25") 1815 KG (4000 LB) 508MM (20") 2268 KG (5000 LB) 330MM (13") 2722 KG (6000 LB) CENTER OF GRAVITY WITHIN 50.8MM (2") ALL DIRECTIONS 10/19/18 RELEASED DATE DESCRIPTIO...
- Page 6 nvironmEntal EquirEmEnts • Temperature -23°C to 93°C (-10°F to 200°F) • Humidity Use in any humidity condition is permissible • Wind Effects Wind gusts in the work area must be below 32 kph (20 mph) during use to avoid excessive horizontal forces on the engine which can result in loss of stability missions •...
-
Page 7: E Mergency I Nstructions
otating 1. Ensure all workers and tools are clear of the engine. 2. Firmly grasp the crank handle and slide the lock collar to unlock the handle. A magnet in the collar will retain it in the unlocked position during use. 3. -
Page 8: Storage Requirements
Fill as needed with good quality hydraulic oil. nstructions The K-Line® Revolving Engine Stand is designed to provide a long life of service. If the need arises to decommission a stand, contact K-Line® customer service for scrap/disposal instructions for your location. - Page 9 11/2/2018...
- Page 10 notEs...
- Page 11 notEs...
- Page 12 FOR PRODUCT INFORMATION OR TO PURCHASE REPLACEMENT PARTS CONTACT K-LINE CUSTOMER SERVICE AT 1-800-824-KLINE (5546) [email protected] KLINEINDUSTRIES.COM Copyright 2018 K-Line® Industries, Inc. 4430230-200 Rev A...