Channels Setup - Hitachi LE55V707 Owner's Manual

This TV is equipped with a Channel Manager feature which

allows channels to skip up or down to the next channel

set into the Channel Manager, skipping over unwanted

channels.

Before selecting channels, they must be scanned into the

TV's Channel Manager.

Air/Cable selection

1

Select "Channels" ⇒ "Source".

2

Press ▲ or ▼ to select "Air" or "Cable".

Air - VHF/UHF channels

Cable - CABLE TV channels

NOTE:

• It may take a few seconds for a digital channel picture to appear

on screen after being selected.

Auto Channel Scan

1

Select "Channels" ⇒ "Auto Channel Scan" ⇒ "Start Scan", then

press SELECT.

2

The TV will begin scanning all the channels available in your

area.

• It may take from 15 minutes to 30 minutes to complete

channel scan.

• Depending on the reception condition the progress bar may

not advance for several minutes, please be patient.

NOTE:

• If you are unsure of the digital channels available in your area,

you may visit www.antennaweb.org to receive a list based on your

address or zip code. If you require further assistance you may call

our toll-free customer service line at 800.HITACHI (800.448.2244)

(USA/CANADA).

• New channels may be added to your area periodically, it is

recommended to perform the "Auto Channel Scan" procedure

regularly.

3

The new channels will be added into the Channel Manager.

EN 18

Channel Manager

With the Channel Manager you can select channels that you want

to skip or channels that you would like to add to the "Favorite List".

1

Select "Channels" ⇒ "Channel Manager", then press ▶ or

SELECT.

2

Press ▲ or ▼ to select the channel that you want to skip or

add to the "Favorite List".

3

Press SELECT once to skip an unwanted channel (marking it

with an "X") or press SELECT twice to add the channel to the

"Favorite List" (marking it with "FAV").

4

Repeat steps 2 - 3 for other channels you want to skip or add

to the "Favorite List".