Ismantling The Piston And Cylinder - Husqvarna 555 Workshop Manual
Hide thumbs
Also See for 555:
- Operator's manual (92 pages) ,
- Workshop manual (68 pages) ,
- User manual (60 pages)
Table of Contents
7.21 Dismantling the piston and cylinder
1
ismantle:
The cylinder co er
The carburettor see
carburettor
The muf er
The ibration element
The spark plug cap
The intake system
2
Unscrew the cylinder s four screws
and carefully lift away the cylinder and the gasket.
See gure 60.
NOTE!
Take care to prevent any dirt and foreign
particles from entering the crankcase.
3
Co er o er the crankcase opening.
4
Remo e the circlips for the gudgeon pin and press
out the gudgeon pin. The lift off the piston. See
gure 61.
5
Remo e the gudgeon pin bearing the needle bear-
ing using a pliers. See gure 61. Replace with a
new bearing.
Cleaning and inspection of the cylinder
Clean all components, scrape off all gasket re-
mains and soot from the following areas:
The piston crown
The top of the cylinder bore inside
The cylinder e haust port
The base of the cylinder and/or crankcase
ismantling the
ig 60
ig 61
Repair nstructions
45
English -
Chapters
Table of Contents
