Emerson CFSCK Series Instructions Manual
  1. Manuals
  2. Brands
  3. Emerson Manuals
  4. Racks & Stands
  5. Instructions manual
Emerson CFSCK Series Instructions Manual

Emerson CFSCK Series Instructions Manual

Hide thumbs
1
2
3
4
5
6
7
8
Table of Contents

Quick Links

READ AND SAVE THESE INSTRUCTIONS
CFSCK Series
Sloped Ceiling Kit
Net Weight: 1.2 Lbs.
For use only with Emerson Ceiling Fans
(except Snugger models and fans with threaded downrods)
Sloped Ceiling Kit
Owner's Manual
(for up to 45° ceiling slope)
Part No. F40BP72220001
Form No. BP7222-1
Table of Contents
loading

Related Manuals for Emerson CFSCK Series

Summary of Contents for Emerson CFSCK Series

  • Page 1 READ AND SAVE THESE INSTRUCTIONS CFSCK Series Sloped Ceiling Kit Net Weight: 1.2 Lbs. For use only with Emerson Ceiling Fans (except Snugger models and fans with threaded downrods) Sloped Ceiling Kit Owner's Manual (for up to 45° ceiling slope) Part No.

  • Page 2: Safety Instructions

    WARNING WARNING: To avoid fire, shock, and serious personal injury, follow these instructions. Do Not mount the fan on radiant-heating ceilings. Safety Instructions 1. Read your owner’s manual carefully and keep it for future reference. 2. Before servicing or cleaning unit, switch power off at service panel and lock service panel disconnecting means to prevent power from being switched on accidentally.

  • Page 3: Tools Needed For Assembly

    General Information This Sloped Ceiling Kit can be used with any WARNING Emerson ceiling fan. This kit must only be attached to an outlet box marked acceptable for fan support. To reduce the risk of fire, electric shock, or personal injury, mount fan to outlet box marked acceptable for fan support, and use screws supplied with outlet box.
  • Page 4 Installation on Sloped Ceiling (up to 45°) WARNING The outlet box must be securely anchored and RETAINING STRAP MUST FACE UPWARD capable of withstanding a load of at least (OR "UP SLOPE") 50 lbs. 1. Securely attach the hanger bracket (supplied with the sloped ceiling kit) to the outlet box using the two OUTLET BOX DOWN...
  • Page 5 NOTE: If your fan already has a short downrod attached, follow steps 2 and 3. If no downrod is presently attached, skip to step 4. 2. Remove the hanger ball as follows: Loosen the setscrew in the hanger ball, slide the ball down the AT LEAST 6 INCHES downrod, and remove the pin and retain for later...
  • Page 6 8. Position the ceiling cover over the downrod. Be sure the cover is oriented correctly, with the large RETAINING STRAP opening at the top (Figure 7). SOCKET HEAD CAP SCREW WARNING HEX WRENCH (SUPPLIED) Only use the hanger ball and mounting bracket supplied with this kit.
  • Page 7 14. Raise the ceiling cover up to the hanger bracket (Figure 11) and determine which set of tapped holes (“A” or “B”, Figure 10) should be used so that the ceiling cover slot will clear the downrod. (On lesser sloped ceilings, it will not matter which set of holes are used.

  • Page 8: Limited Warranty

    You will be responsible for all insurance, freight or other transportation charges to our factory or authorized service center. Your Emerson Sloped Ceiling Kit should be properly packed to avoid damage in transit since we will not be responsible for any such damage.

Table of Contents