Bosch WTX87MH0SG/03 User Manual And Installation Instructions

Bosch WTX87MH0SG/03 User Manual And Installation Instructions

Hide thumbs Also See for WTX87MH0SG/03:
Table of Contents

Quick Links

Tumble dryer
WTX87MH0SG
[en]
User manual and installation
instructions
Table of Contents
loading

Summary of Contents for Bosch WTX87MH0SG/03

  • Page 1 Tumble dryer WTX87MH0SG [en] User manual and installation instructions...
  • Page 2: Table Of Contents

    Futher information and explanations are available online: Table of contents 1 Safety ..........   4 9 Programmes .......    24 1.1 General information.... 4 9.1 Automatic programmes.... 24 1.2 Intended use....... 4 9.2 Timed programmes .... 25 1.3 Restriction on user group... 4 10 Accessories......   27 1.4 Safe installation ...... 5 1.5 Safe use ........ 7 11 Laundry........
  • Page 3 20 Customer Service.....    54 14.5 Resetting the appliance 20.1 Product number (E-Nr.) and network settings ..... 33 production number (FD).. 54 14.6 Remote start ...... 33 14.7 Intelligent programme re- 21 Consumption values....   55 commendation...... 34 14.8 Remote diagnostics .... 34 22 Technical data ......   55 14.9 Data protection....... 35 23 Declaration of Conformity ..
  • Page 4: Safety

    en Safety 1 Safety Observe the following safety instructions. 1.1 General information ¡ Read this instruction manual carefully. ¡ Keep the instruction manual and the product information safe for future reference or for the next owner. ¡ Do not connect the appliance if it has been damaged in transit. 1.2 Intended use Only use this appliance: ¡...
  • Page 5: Safe Installation

    Safety en 1.4 Safe installation WARNING ‒ Risk of electric shock! Incorrect installation is dangerous. ▶ Connect and operate the appliance only in accordance with the specifications on the rating plate. ▶ Connect the appliance to a power supply with alternating cur- rent only via a properly installed socket with earthing. ▶...
  • Page 6 en Safety ▶ If the power cord is too short and a longer one is not available, please contact an electrician to have the domestic installation adapted. WARNING ‒ Risk of injury! The high weight of the appliance may result in injury when lifted. ▶...
  • Page 7: Safe Use

    Safety en CAUTION ‒ Risk of cutting! Touching sharp edges on the appliance may lead to cuts. ▶ Do not touch the sharp edges on the appliance. ▶ Wear protective gloves when installing and transporting the ap- pliance. 1.5 Safe use WARNING ‒ Risk of electric shock! If the appliance or the power cord is damaged, this is dangerous.
  • Page 8 en Safety WARNING ‒ Risk of explosion! If there is coal dust or flour in the air around the appliance, this may cause an explosion. ▶ Keep the area around the appliance clean during operation. WARNING ‒ Risk of poisoning! Condensation water from this appliance is not suitable for drinking and may be contaminated with fluff.
  • Page 9: Safe Cleaning And Maintenance

    Safety en WARNING ‒ Risk of fire! If drying is interrupted early, the laundry is not cooled sufficiently and may ignite. ▶ Do not interrupt the drying programme early. ▶ If drying is interrupted early, remove the laundry immediately and spread it out. CAUTION ‒ Risk of injury! The covering plate may break if you stand on or climb onto the appliance.
  • Page 10 en Safety WARNING ‒ Risk of injury! The use of non-original spare parts and non-original accessories is dangerous. ▶ Only use the manufacturer's original spare parts and original ac- cessories. WARNING ‒ Risk of poisoning! Poisonous fumes may be given off if you use cleaning agents that contain solvents.
  • Page 11: Preventing Material Damage

    Preventing material damage en Clean the appliance with nothing ▶ 2 Preventing material but water and a soft, damp cloth. Remove all detergent residue, damage ▶ spray residue or other residues im- mediately if they come into contact ATTENTION! with the appliance. The functionality of the appliance may be impaired if you use the wrong quantity of fabric softener, de-...
  • Page 12: Energy Saving Mode

    en Installation and connection Remove any packaging and pro- Dry the filters in the filter system of tective covers completely from the the base unit → Page 29 thoroughly appliance. after cleaning. → "Disposing of packaging", a If the filters are damp, this extends Page 11 the programme duration and in- creases energy consumption.
  • Page 13: Requirements For The Install- Ation Location

    Installation and connection en Included with Description Installation loca- Requirements the appliance tion Water drain hose In a washer-dryer Only use the ori- with connection stack ginal connection adapter, fixing set from the material and el- dryer manufac- bow. turer when set- → "Water drain ting up this appli- ance in a...
  • Page 14 en Installation and connection hose to drain away excess condens- Pull out the condensation hose ation directly into the waste water from the connecting piece. system. Notes ¡ Operate this appliance using the water drain hose provided. If you connect the water drain hose → Page 14, you do not have to regularly empty the condensation container → Page 31.
  • Page 15 Installation and connection en Push the water drain hose as far Insert the stopper into the recess as it will go into the connecting in the top. piece. Insert the condensation container Empty the condensation container → Page 31. → Page 31. Connect the appliance to the water outlet.
  • Page 16: Aligning The Appliance

    en Installation and connection 4.5 Aligning the appliance Note: You can use the Y-distrib- In order to reduce vibrations and utor → Page 27 noises, align the appliance correctly. to connect the To align the appliance, turn the ap- ▶ water drain hose pliance feet. Check that the appli- of an additional ance is level using a spirit level.
  • Page 17: Familiarising Yourself With Your Appliance

    Familiarising yourself with your appliance en 5 Familiarising yourself with your appliance 5.1 Appliance You can find an overview of the parts of your appliance here. On certain models, specific details such as the colour and shape may differ from those pictured. Ventilation opening Door Maintenance flap on the base Condensation container...
  • Page 18: Control Panel

    en Familiarising yourself with your appliance 5.2 Control panel You can use the control panel to configure all functions of your appliance and to obtain information about the operating status. Programmes → Page 24 Programme selector → Page 28 Buttons → Page 21 Display → Page 19...
  • Page 19: Display

    Display en 6 Display The display shows the current settings, options or relevant information. Display Designation Description 0:40 Programme dura- Expected programme duration or pro- tion/programme gramme time remaining in hours and time remaining minutes. ⁠ 1:25 Timed programme The timed programme is set. → "Timed programmes", Page 25 "Ready in"...
  • Page 20 en Display Display Designation Description ⁠ Filter system on Clean the filter system on the base unit the base unit → Page 29. Basic appliance Run the basic appliance care programme. care programme → "Running the basic appliance care pro- gramme on the appliance", Page 39 Cooling process The laundry is cooled while the drum is rotating, in order to avoid damage to the...
  • Page 21 Buttons en 7 Buttons Below is an overview of the buttons and their setting options. Button Selection Description Start/ ⁠ Pause ¡ Start Start, cancel or pause the programme. ¡ Cancel ¡ Pause ⁠ (mains switch) ¡ Switch on Switch the appliance on or off.
  • Page 22 en Buttons Button Selection Description Easy Iron 120' ⁠ ¡ Activate Activate or deactivate the crease-reduction func- ¡ Deactivate tion. Once the programme has ended, the drum moves the laundry at regular intervals for 120 minutes to prevent creasing. Low Heat ⁠...
  • Page 23: Changing The Dryness Level

    Dryness level en 8 Dryness level Each automatic programme has a specified dryness level. The dryness level defines how dry or damp your laundry is after the programme ends. Dryness level Laundry Drying result ⁠ Multi-layered, thick laundry The laundry is dry. that does not dry readily.
  • Page 24: Programmes

    en Programmes 9 Programmes You can dry your fabrics using either an automatic programme or a timed pro- gramme. 9.1 Automatic programmes Automatic programmes are pro- Tips grammes in which humidity sensors ¡ Select the dryness level according measure the residual moisture in the to the type of fabric or the desired laundry during the drying cycle.
  • Page 25: Timed Programmes

    Programmes en Programme Description Max. load (kg) ⁠ Sportswear Dry self-drying sportswear made of per- formance fibres, microfibres and synthet- ics. ⁠ Shirts/Blouses Suitable for shirts and blouses made of cotton, linen, synthetics or blended fab- rics. Note: For optimal drying results, dry a maximum of 5 shirts or 5 blouses at the same time.
  • Page 26 en Programmes Programme Description Max. load (kg) Wool Finish ⁠ Dry machine-washable items made of wool or containing wool. Note: The laundry becomes fluffier but not dry. Remove laundry once the programme has ended and allow it to dry. Timed Progr. Warm ⁠...
  • Page 27: Accessories

    Accessories en 10 Accessories Use original accessories. These have been made especially for your appli- ance. Note: Some accessories are avail- able in other colours. Contact → "Customer Service", Page 54. Order number Connection kit To save space, stack the WTZ27410 appliance on a suitable washing machine of the same width and depth and that is from the...
  • Page 28: Basic Operation

    en operation ¡ Remove curtain fittings and lead Note: The programme settings are strips not saved permanently for the pro- ¡ Wash small or particularly delicate gramme. items in a mesh washing bag 12.4 Loading laundry ¡ Load the laundry unfolded into the drum Note: To prevent creasing, note the ¡...
  • Page 29: Cancelling The Programme

    operation en Open the door. Requirement: The display shows the following during operation: ⁠ . Add or remove laundry. Close the door. Open the base unit → Page 44. Press Start/ ⁠ Pause . Remove the fluff. 12.7 Cancelling the pro- gramme Press Start/ ⁠ Pause . Open the door.
  • Page 30 en operation Pull the fluff collector out horizont- Clean the filter thoroughly under ally. running water and then dry it off. The fluff collector may contain con- You can remove heavy soiling densation, which may drip out of it carefully with a soft brush. when you pull it out.
  • Page 31: Condensation Container

    operation en Empty the condensation container. Close the base unit → Page 44. 12.11 Condensation con- tainer Condensation forms during drying, which your appliance uses for auto- matic cleaning. By default, the con- densation is collected in the appli- ance's condensation container. Note: Operate this appliance using the water drain hose provided.
  • Page 32: Childproof Lock

    The Home Connect app guides scanning the QR code in the table of you through the entire login pro- contents or on www.bosch- cess. home.com. The Home Connect services are not available in every country. The avail- ability of the Home Connect function...
  • Page 33: Setting Up Home Connect

    Home Connect en 14.2 Setting up Home Con- 14.4 Deactivating Wi-Fi on the nect appliance Press and hold ⁠ Remote Start Requirements ¡ The Home Connect app has been for at least three seconds. installed on your mobile device. Set the programme to position 4. ¡ Wi-Fi has been activated on the a The display shows Con .
  • Page 34: Intelligent Programme Recommendation

    en Home Connect If the appliance finds a suitable Requirements ¡ The appliance is connected to your programme, the display for the Wi-Fi home network. programme lights up and the pro- ¡ The appliance is connected to the gramme information is displayed. Home Connect app.
  • Page 35: Data Protection

    Home Connect en 14.9 Data protection Please see the information on data protection. The first time your appliance is registered on a home network connected to the Internet, your appliance will transmit the following types of data to the Home Connect server (initial registration): ¡...
  • Page 36: Basic Settings

    en Basic settings 15 Basic settings You can configure the basic settings for your appliance to meet your needs. 15.1 Overview of basic settings Basic setting Programme posi- Value Description tion End signal 0 (off) Set the volume of 1 (quiet) the signal at the 2 (medium) end of the pro- 3 (loud)
  • Page 37: Changing The Basic Set- Tings

    Appliance care en Remove the laundry. 15.2 Changing the basic set- tings Set the programme selector to po- sition 1. Close the appliance door. Pull out the condensation con- tainer, keeping it level. Press Drying Target ⁠  and, at the same time, turn the programme selector to position 2.
  • Page 38: Preparing The Condensation Container For The Appliance Care Programme

    en Appliance care 16.2 Preparing the condensa- 16.3 Starting the appliance tion container for the ap- care programme pliance care programme Requirements ¡ The appliance is ready to run the Note: If the condensation is drained appliance care programme. using the drain hose, the condensa- → "Preparing the appliance for the tion container must be prepared be- appliance care programme ",...
  • Page 39: Running The Basic Appli- Ance Care Programme On The Appliance

    Appliance care en Insert the condensation container 16.4 Running the basic appli- so that it locks into place. ance care programme on the appliance To remove any light soiling, you can run a basic appliance care pro- gramme. Note: After a certain period of use, the appliance automatically recom- mends that you run the basic appli- ance care programme.
  • Page 40: Preparing The Appliance For The Intensive Appliance Care Programme

    en Appliance care Empty the condensation container 16.5 Preparing the appliance → Page 31. for the intensive appli- ance care programme If the appliance is not used for more than one month, stubborn dirt or odours may occur. To remove this, you can run an intensive appliance care programme.
  • Page 41: Running The Intensive Appli- Ance Care Programme

    Appliance care en Insert the condensation container 16.6 Running the intensive so that it locks into place. appliance care pro- gramme Pull out the condensation con- tainer horizontally and empty it. Press Start/ ⁠ Pause . The appli- ance care programme starts and an audible signal sounds.
  • Page 42: Ending The Intensive Appli- Ance Care Programme

    en Appliance care Add approx. 1 ½ litres of hot tap 16.7 Ending the intensive ap- water into the condensation con- pliance care programme tainer. Add approx. 1 ½ litres of hot tap water into the condensation con- tainer. Hold the full condensation con- tainer level so that no liquid spills out.
  • Page 43: Cleaning And Servicing

    Note: You can find further information in the digital instruction manual by scanning the QR code in the table of contents or on www.bosch- home.com. 17.1 Tips on cleaning and care Wipe down the...
  • Page 44: Base Unit

    en Cleaning and servicing Pull out the heat exchanger cover 17.2 Base unit by the handle. The base unit is the accessible area at the bottom of the appliance in which you will find the heat ex- changer. Opening the base unit Requirements ¡...
  • Page 45: Moisture Sensor

    Cleaning and servicing en Insert the heat exchanger cover by ance changes the duration of the the handle. automatic programme depending on the residual moisture in the laundry. Cleaning the moisture sensor Over time, residue from limescale, detergents and care products can build up on the moisture sensor.
  • Page 46: Condensation Container Filter

    en Cleaning and servicing Remove the filter. 17.4 Condensation container filter During drying, fluff from the laundry gets into the condensation. The filter in the condensation container pro- tects the appliance from fluff. Clean the filter for the condensation tank. The filter is cleaned automatically when the condensation container is emptied.
  • Page 47: Troubleshooting

    Troubleshooting en 18 Troubleshooting You can rectify minor faults on your appliance yourself. Read the troubleshoot- ing information before contacting after-sales service. This will avoid unneces- sary costs. WARNING Risk of electric shock! Incorrect repairs are dangerous. Repairs to the appliance should only be carried out by trained specialist ▶...
  • Page 48 en Troubleshooting Fault Cause and troubleshooting The appliance is not Check whether the lighting in your kitchen or other ▶ working. appliances are working. Appliance paused, but Cooling process active. the drum is rotating. Not a fault – no action required. ▶...
  • Page 49 Troubleshooting en Fault Cause and troubleshooting ⁠ and programme Water drain hose is not connected correctly. terminated. Ensure that the water drain hose is connected cor- ▶ rectly. → "Connecting the water drain hose", Page 14 Water drain hose is blocked. Rinse the water drain hose with tap water. ▶...
  • Page 50 en Troubleshooting Fault Cause and troubleshooting The drying time is too The base unit's filter is soiled. long. → "Cleaning the filter system on the base unit", ▶ Page 29 The ambient temperature is greater than 30 °C. Ensure that the ambient temperature is lower than ▶...
  • Page 51 Troubleshooting en Fault Cause and troubleshooting The drying time is too Ensure that the ambient temperature is above 16 ▶ long. °C or start the next drying process within 2 hours. → " Technical data", Page 55 Remote start is activated and the ambient temperature is lower than 16 °C.
  • Page 52 en Troubleshooting Fault Cause and troubleshooting The laundry is too Check whether the lighting in your kitchen or other ▶ damp. appliances are working. The load is too large. Observe the maximum load capacity of the ▶ → "Programmes", Page 24. After the end of the programme, warm laundry feels damper than it actually is.
  • Page 53: Transportation, Storage And Disposal

    Transportation, storage and disposal en Empty the condensation container 19 Transportation, stor- → Page 31. age and disposal Insert the condensation container → Page 31. Disconnect the appliance's mains 19.1 Preparing the appliance plug from the power supply. for transportation a The appliance is now ready to be transported.
  • Page 54 en Customer Service Information about current disposal ¡ On the rear of the appliance. methods are available from your Make a note of your appliance's de- specialist dealer or local authority. tails and the Customer Service tele- phone number to find them again This appliance is la- quickly.
  • Page 55 Consumption values en 21 Consumption values The specified values are indicative amount of laundry being loaded, en- only and were determined in accord- vironmental conditions and the activ- ance with the applicable standard ation of additional functions. IEC61121. The expected programme dura- The actual values may deviate from tion/"Ready in"...
  • Page 56 Directive 2014/53/ A detailed RED Declaration of Con- formity can be found online at www.bosch-home.com among the additional documents on the product page for your appliance. UK (NI) 5 GHz WLAN (Wi-Fi): For indoor use only.
  • Page 60 Expert advice for your Bosch home appliances, help with problems or a repair from Bosch experts. Find out everything about the many ways Bosch can support you: www.bosch-home.com/service Contact data of all countries are listed in the attached service direct- ory.

This manual is also suitable for:

Wtx87mh0sg

Table of Contents