Security Access Levels And Codes - Siemens SINAMICS PERFECT HARMONY GH180 Function Manual
Hide thumbs
Also See for SINAMICS PERFECT HARMONY GH180:
- Function manual (338 pages) ,
- Operating instructions manual (224 pages) ,
- Reference manual (48 pages)
Table of Contents
Parameter Assignment/Addressing
6.13 Security Access Levels and Codes
6.13
Security Access Levels and Codes
Note
Changing default access codes
Access codes allow you to access and change the default security settings of the drive control.
Menu options above security level 5 are intended only for trained Siemens personnel during
commissioning or servicing.
Siemens recommends changing access codes to provide a higher level of security and to prevent
tampering.
Access the Security Edit Menu (5000) to change the factory default security settings. When the
drive is configured for security level 7 access, the Security Edit Menu (5000) is visible from the
Main Menu (5). Functions within this menu are used to:
• set the security levels for menu items
• hide menu items
• prevent changes to specific parameters.
The Security Edit Functions Menu (5000) contains security functions described in the table
below.
Table 6-82
Default Security Access Levels and Access Codes
Access Level
0
5
7
152
Default Access Code
Level of Security
None
Minimum access
5555
Startup access for service and/or startup
7777
Advanced access for troubleshooting
NXGPro+ Control Manual
Operating Manual, A5E50491925A
- Quick Links:
- Table of Contents
Hide quick links:
Chapters
Table of Contents
Troubleshooting
