Quick Links
Important notes
Information on the installation manual
This manual enables operating or service personnel
to correctly install the product described below and
to use it safely and efficiently.
It is essential that these individuals read and fully
understand this manual before starting any work.
The basic prerequisite for safe working is to comply
with the safety notes and all instructions in this
manual.
The local regulations for health and safety at work
and general safety regulations also apply.
Safety
Correct use
Filter insert MFI is used as a prefilter or final filter in
ventilation and air conditioning systems to separate
fine dusts from the air.
Airflow velocity and nominal volume flow rate
If the filter is used correctly and if the nominal
volume flow rate is maintained, the airflow velocity
on the filter will usually not exceed the maximum
airflow velocity (see technical data), not even when
the final differential pressure is reached.
Use test and monitoring systems, e.g. differential
pressure monitors or flow meters, to ensure that the
nominal volume flow rate is maintained.
Qualified staff
The work described in this manual has to be carried
out by individuals with the qualification, training,
knowledge and experience described below:
Installation and mainte-
nance manual
MFI
Mini Pleat filters
MFI Mini Pleat filters
GB/en
Properly trained person
Properly trained persons are trained individuals who
understand any potential hazards related to the
work under consideration, and who recognise and
avoid any risks involved. Training is provided by the
HVAC contractor when the system is handed over.
Properly trained persons are responsible for
cleaning the unit, and for carrying out functional
tests, regular checks and smaller adjustments.
Personal protective equipment
Personal protective equipment is equipment that
protects the user against health or safety risks at
work.
Personal protective equipment must be worn for
various types of work; the protective equipment
required is listed in this manual together with the
description of each type of work.
Supply package, transport and storage
Upon delivery, carefully remove the packaging and
check the unit for transport damage and complete-
ness. Then put the product back into its packaging.
Supply package:
Filter MFI
Transport
Do not remove the protective wrapping until just
before installation.
TROX GmbH
Heinrich-Trox-Platz
47504 Neukirchen-Vluyn
Germany
Phone: +49 (0) 2845 2020
Fax: +49 (0) 2845 202265
E-mail: [email protected]
Internet: http://www.trox-
technik.com
1
Related Manuals for Trox MFI
Summary of Contents for Trox MFI
- Page 1 Correct use required is listed in this manual together with the Filter insert MFI is used as a prefilter or final filter in description of each type of work. ventilation and air conditioning systems to separate Supply package, transport and storage fine dusts from the air.
- Page 2 +5 °C. Be sure to prevent this, e.g. with a filter preheater. Handle the filter with care and only touch the frame. Calculation example 3400 m³/h 592 mm (0.592 m) 592 mm (0.592 m) Result: V = 2.69 m/s MFI Mini Pleat filters...
- Page 3 To ensure permanent protection from particulate matter and other pollutants we recommend using only original TROX filters. Original TROX filters carry a sticker on the frame You may replace a filter even before the defined with information on how to order replacements.