Bosch WAK18065SG Instruction Manual And Installation Instructions

Bosch WAK18065SG Instruction Manual And Installation Instructions

Table of Contents

Quick Links

Washing machine
WAK18065SG
en Instruction Manual and Installation Instructions
Table of Contents
loading

Summary of Contents for Bosch WAK18065SG

  • Page 1 Washing machine WAK18065SG en Instruction Manual and Installation Instructions...
  • Page 2 Your new washing machine Display rules : Warning! You have chosen a Bosch washing machine. This combination of symbol and signal word indicates a possibly dangerous Please take a few minutes to read and situation. Not heeding the warning can become familiar with the advantages of cause death or injuries.
  • Page 3: Table Of Contents

    Contents e n I n s t r u c t i o n M a n u a l a n d I n s t a l l a t i o n I n s t r u c t i o n s Placing laundry into the drum .
  • Page 4: Intended Use

    Intended use Installing the appliance Intended use in a kitchenette ....27 Removing the transport locks ..28 For private domestic use only. Hose and cable lengths.
  • Page 5: Safety Instructions

    Safety instructions If you lean on the washing Safety instructions ■ machine door when it is open, the washing machine Electrical safety may tip over and cause S a f e t y i n s t r u c t i o n s injuries.
  • Page 6 Safety instructions Warning Warning Danger of death! Eye/skin irritation! Children may lock themselves Detergents and care products in appliances, putting their lives may cause irritation if they at risk. come into contact with the eyes For appliances that have or skin. reached the end of their service Keep detergents and care life:...
  • Page 7: Environmental Protection

    Environmental protection Tips on economical use Environmental protection Always fill the appliance with the ■ maximum amount of laundry for the relevant programme. Packaging/used appliance Overview of programmes E n v i r o n m e n t a l p r o t e c t i o n ~ Page 13 Dispose of packaging in an Wash normally soiled laundry...
  • Page 8: Main Points In Brief

    Main points in brief Main points in brief M a i n p o i n t s i n b r i e f Connect the mains Turn on the water Sort the laundry. Open the door. plug. tap. -------- Select a programme Load the laundry .
  • Page 9: Getting To Know The Appliance

    Getting to know the appliance Getting to know the appliance Washing machine G e t t i n g t o k n o w t h e a p p l i a n c e Detergent drawer ~ Page 16 Controls/display elements Washing machine door with window handle...
  • Page 10: Control Panel

    Getting to know the appliance Control panel ( Start/Pause A for starting, interrupting and cancelling a programme 0 Extra Rinse ', Quick e for choosing the additional programme settings Overview of all programme settings ~ Page 15 8 Status indicators for the programme progress (programme sequence): 6 : End...
  • Page 11: Laundry

    Laundry Sorting laundry Laundry Sort your laundry according to the care P repare the laundry instructions and manufacturer's L a u n d r y information on the care labels: Caution! Type of fabric/fibre ■ Damage to the appliance/fabrics Colour ■...
  • Page 12: Detergent

    Detergent Saving energy and detergent Detergent For light and normal soiling, you can C orrect selection of detergent save energy (lower washing D e t e r g e n t temperature) and detergent. The care label is crucial for selecting the correct detergent, temperature and Saving Soiling/note...
  • Page 13: Overview Of Programmes

    Overview of programmes Overview of programmes Programmes on the programme selector O v e r v i e w o f p r o g r a m m e s Programme/type of laundry/information Settings/Presettings of the pro- grammes are highlighted in bold Max.
  • Page 14 Overview of programmes Programme/type of laundry/information Settings/Presettings of the pro- grammes are highlighted in bold Max. 6.5 kg/4* kg Kids • Hard-wearing fabrics, heat-resistant fabrics made of cotton or linen 40 °C 900 rpm O, e Daily Wash o Max. 3.5 kg A mixed load of fabrics made of cotton and synthetic fabrics 30 °C 900 rpm...
  • Page 15: Starching

    Additional programme settings Starching Additional programme settings Laundry shall not be treated with Note: fabric softener. Extra Rinse à Starching is possible in all wash A d d i t i o n a l p r o g r a m m e s e t t i n g s programmes if liquid starch is used.
  • Page 16: Select Programme/Switch On The Appliance

    Operating the appliance Select programme/switch on Place presorted items of laundry unfolded in the washing drum. the appliance Make sure that no items of laundry are trapped between the washing Use the programme selector to select machine door and the rubber seal, the required programme.
  • Page 17: Start The Programme

    Operating the appliance Filling Measuring aid* for liquid detergent *depending on the model Warning Eye/skin irritation! Position the measuring aid for Detergent and care products may spray measuring the correct amount of liquid out if the detergent drawer is opened detergent: while the machine is in operation.
  • Page 18: Cancel The Programme

    Sensors Cancel the programme Always wait for the end of the ■ programme, otherwise the appliance may still be locked. Then switch on Programmes at high temperatures: the appliance and wait for it to Press Start/Pause A . unlock. To cool the laundry: Select O Rinse. If the display panel goes off at the Press Start/Pause A .
  • Page 19: Cleaning And Maintenance

    Cleaning and maintenance Descaling Cleaning and Descaling should not be necessary if maintenance the detergent is measured out correctly. However, if it is required, follow the Warning manufacturer's instructions for the C l e a n i n g a n d m a i n t e n a n c e Danger of death! descaling agent.
  • Page 20: The Drain Hose At The Siphon Is Blocked

    Cleaning and maintenance Allow the water to cool down. Place the service flap back on, lock it into place, and close it. Turn off the water tap so that no more water can flow in and has to be drained via the drain pump. Switch off the appliance.
  • Page 21: Faults And What To Do About Them

    Faults and what to do about them. Press Start/Pause A . Allow the However, if the laundry has to be programme to run for approximately removed, the washing machine door 40 seconds. can be opened as follows: Set the programme selector to off Warning position.
  • Page 22: Information On The Display Panel

    Faults and what to do about them. Information on the display panel Display Cause/remedial action Indicator lights for status displays and/or buttons flash: Note: Indicator lights O Close the washing machine door properly, laundry may be caught. und N flash. Indicator lights 0 Turn the water tap on fully, ■...
  • Page 23 Faults and what to do about them. Faults Cause/remedial action Spin result not satisfac- Not a fault – the unbalanced load detection system has interrupted the spin tory. because the laundry is unevenly distributed. Laundry wet/too damp. Distribute large and small items of laundry evenly in the drum. Spin cycle started and Not a fault –...
  • Page 24: After-Sales Service

    After-sales service After-sales service If you cannot correct the fault yourself, A f t e r - s a l e s s e r v i c e (see section, Faults and what to do about them ~ Page 21), please contact our after-sales service.
  • Page 25: Consumption Rates

    Consumption rates Consumption rates Consumption values table C o n s u m p t i o n r a t e s Programme Load Energy consumption* Water* Programme duration* i Cottons cold 6.5 kg 0.15 kWh 62 l 1 3/4 h i Cottons 40 °C 6.5 kg 0.67 kWh...
  • Page 26: Technical Data

    Technical data Technical data Dimensions: T e c h n i c a l d a t a 850 x 600 x 590 mm (Height x width x depth) Weight 63-83 kg (depending on model) Mains connection: Mains voltage 220-240 V, 50 Hz Nominal current 10 A Nominal input 2300 W Water pressure:...
  • Page 27: Safety Instructions

    Positioning and connecting In addition, a hose clamp (24 - 40 mm Notes diameter, available from specialist In addition to the safety information ■ dealers) is required to connect the listed here, the local water and water drain hose to a siphon. electricity supplier may have special requirements.
  • Page 28: Removing The Transport Locks

    Positioning and connecting Remove the sleeves. To do this, Notes remove the mains cable from the Recess width of 60 cm required. ■ holders. Only install the washing machine ■ underneath a continuous worktop that is securely connected to adjacent cabinets. Removing the transport locks Caution! Damage to the appliance...
  • Page 29: Water Inlet

    Positioning and connecting Right-hand connection Only tighten the screw connections ■ ■ by hand. If the screw connections are tightened too much with a tool (pliers), the thread may be damaged. Optimum water pressure in the supply network At least 100 kPa (1 bar) Maximum 1000 kPa (10 bar) When the tap is open, the water flow is at least 8 l/min.
  • Page 30: Water Outlet

    Positioning and connecting Water outlet – The water drains away quickly enough. Caution! Water damage If the drain hose slips out of the wash basin or the connection point during draining due to high water pressure, any escaping water may cause water damage.
  • Page 31: Electrical Connection

    Positioning and connecting Tighten the lock nut against the If an earth-leakage circuit breaker is ■ housing. used, only a type which displays this In doing so, hold the foot tight and symbol is used: z. do not adjust its height. Only this symbol guarantees The lock nuts on all four appliance compliance with the currently...
  • Page 32: Before Washing For The First Time

    Positioning and connecting Do not use the machine with an Transportation ■ extension box, extension cord, spike e.g. when moving home busters etc., as this may lead to improper grounding conditions. Preparatory work: Turn off the water tap. Before washing for the first Reduce the water pressure in the time supply hose.
  • Page 33 Positioning and connecting Installing the transport locks: Remove the covers and keep them in a safe place. Use a screwdriver if necessary. Insert all four sleeves. Clip the mains cable securely in the holders. Insert and tighten the screws.
  • Page 36 0344 892 8979 (Calls charged at local or mobile rate.) 01450 2655 (0.03 € per minute at peak. Off peak 0.0088 € per minute.) You can find the contact information for all countries in the attached after-sales service directory. Robert Bosch Hausgeräte GmbH Carl-Wery-Straße 34 81739 München, GERMANY *9001050219*...

Table of Contents