Honeywell HDZ402LIWV User Manual
  1. Manuals
  2. Brands
  3. Honeywell Manuals
  4. Security Camera
  5. HDZ402LIWV
  6. User manual

Honeywell HDZ402LIWV User Manual

40x zoom ir ptz dome cameras
Hide thumbs Also See for HDZ402LIWV:
Table of Contents

Quick Links

40X ZOOM IR PTZ
Dome Cameras
HDZ402LIWV HDZ404LIWV HDZ408LIWV
HDZ402LIKV HDZ404LIKV
HDZ408LIKV
User Guide
Table of Contents
loading

Related Manuals for Honeywell HDZ402LIWV

Summary of Contents for Honeywell HDZ402LIWV

  • Page 1 40X ZOOM IR PTZ Dome Cameras HDZ402LIWV HDZ404LIWV HDZ408LIWV HDZ402LIKV HDZ404LIKV HDZ408LIKV User Guide...
  • Page 2 40X ZOOM IR PTZ DOME CAMERA USER GUIDE Copy Right © 2021 Honeywell International Inc. All rights reserved. No part of this publication may be reproduced by any means without written permission from Honeywell. The information in this publication is believed to be accurate in all respects.
  • Page 3 40X ZOOM IR PTZ DOME CAMERA USER GUIDE Cautions and Warnings WARNING Installation and servicing should be performed only by qualified and experienced technicians to conform to all local codes and to maintain your warranty. WARNING To ensure compliance with electrical safety standards, CSA Certified/UL Listed Class 2 power adapters are required.
  • Page 4 40X ZOOM IR PTZ DOME CAMERA USER GUIDE Note Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Canadian Compliance Statement This Class A digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la Classe A est conforme à...
  • Page 5 Crystal, Rectifier diode, TVS tube, Fuse, Bearing, Stepper motor, Electric conduction Lead 7439-92-1 link, Cable, Power adaptor: AC100V~240V to 36V 2.23A Crystal, Rectifier diode, TVS tube, Fuse, HDZ402LIWV Bearing, Stepper motor, Electric conduction Lead 7439-92-1 link, Cable, Power adaptor: AC100V~240V to 36V 2.23A HDZ408LIKV...
  • Page 6 40X ZOOM IR PTZ DOME CAMERA USER GUIDE Any wall or ceiling mounting of the product should follow the • manufacturer’s instructions and use a mounting kit approved or recommended by the manufacturer. POWER SOURCES - This product should be operated only from the type of power source indicated on the marking label.
  • Page 7 Warranty and Service Subject to the terms and conditions listed on the Product warranty, during the warranty period Honeywell will repair or replace, at its sole option, free of charge, any defective products returned prepaid. In the event you have a problem with any Honeywell product, please call Customer Service at 1.800.323.4576 for assistance or to request a Return...
  • Page 8 40X ZOOM IR PTZ DOME CAMERA USER GUIDE The alternating current symbol. This symbol indicates that the power input/output for the product is alternating current. The RCM compliance logo. This logo indicates that the product conforms with Australian RCM guidelines. The CE compliance logo.

  • Page 9: Table Of Contents

    40X ZOOM IR PTZ DOME CAMERA USER GUIDE Table of Contents 1.Accessing the Camera ..............1 Installing the Unified Tool ....................1 Discovering Your Camera on the Network ..............3 Assigning a New IP Address to Your Camera ............... 5 Configure IP Address Setting ..................
  • Page 10 40X ZOOM IR PTZ DOME CAMERA USER GUIDE 4.Playing Back Recorded Video ..........22 Overview of the Playback Interface ................22 Playback Controls ......................22 Video Clip Controls ......................23 Timeline ..........................23 Playing Back Recorded Video ................... 24 Downloading Recorded Video ..................25 Viewing Snapshots........................
  • Page 11 40X ZOOM IR PTZ DOME CAMERA USER GUIDE Filtering IP/MAC Address .................... 51 7.Configuring Event Manage ............. 53 Configuring Video Detection .................... 53 Configuring Motion Detection .................. 53 Configuring Video Tamper ..................56 Configuring Scene Changing..................57 Configuring Audio Detection .................... 57 Configuring Smart Plan ......................
  • Page 12 40X ZOOM IR PTZ DOME CAMERA USER GUIDE Viewing Version Information ..................... 93 Managing Logs ........................93 Viewing Logs ........................93 Backing Up Logs ......................94 Deleting Logs ........................94 Viewing Online Users ......................94 Appendix A Special Presets ............95...
  • Page 13 40X ZOOM IR PTZ DOME CAMERA USER GUIDE ABOUT THIS DOCUMENT This manual is intended for system installers, administrators, and users of Honeywell’s 40X zoom IR PTZ dome network camera. It contains instructions for accessing, configuring, and operating the cameras. Overview of Contents...

  • Page 14: Accessing The Camera

    • Browse to , login, navigate to Download Center  Video  IP Cameras  Camera Discovery Tools & Utilities  Honeywell Unified Tool. Download and unzip the installation package of Unified Tool to your computer. • Copy the installation package of Unified Tool from the CD along with the package of the camera to your computer.
  • Page 15 40X ZOOM IR PTZ DOME CAMERA USER GUIDE Figure 1 Install Unified Tool 2. Click Next and the following figure is displayed: Figure 2 Select Installation Folder 3. Follow the on-screen instructions to configure your settings and click Next. The following figure is displayed:...

  • Page 16: Discovering Your Camera On The Network

    40X ZOOM IR PTZ DOME CAMERA USER GUIDE Figure 3 Confirm Installation 4. Click Next. When the installation is completed, click Close. A shortcut of Unified Tool will be displayed on your desktop. Discovering Your Camera on the Network Double-click on the desktop and the following figure is displayed:...
  • Page 17 40X ZOOM IR PTZ DOME CAMERA USER GUIDE Figure 4 Splash Screen 1. Select your language from the dropdown list of Language. Currently, only English is supported. 2. Check “Don’t show the splash window on startup” and this page can be skipped next time. If you want to check the splash window again, click as shown in Figure 5...

  • Page 18: Assigning A New Ip Address To Your Camera

    40X ZOOM IR PTZ DOME CAMERA USER GUIDE Figure 6 Device List Assigning a New IP Address to Your Camera The current IP address of your camera appears in the IP ADDRESS column of the devices list. If you want, you can assign a new static IP address to the camera. Select the target device(s) as shown in Figure 5, click...

  • Page 19: Configure Ip Address Setting

    40X ZOOM IR PTZ DOME CAMERA USER GUIDE Configure IP Address Setting • To obtain IP address, subnet mask, and default gateway settings automatically, select the check box of DHCP. • To configure IP address, subnet mask, and default gateway settings manually, select the check box of Manual and enter the settings.

  • Page 20: Accessing The Camera From A Web Browser

    40X ZOOM IR PTZ DOME CAMERA USER GUIDE Figure 9 Firmware Upgrade 2 3. Click APPLY. You can check the progress status in the device list. Accessing the Camera from a Web Browser To access the camera from a web browser, click next to the IP address of the device as shown in Figure...

  • Page 21: Logging In And Viewing Live Video

    40X ZOOM IR PTZ DOME CAMERA USER GUIDE 2.LOGGING IN AND VIEWING LIVE VIDEO This chapter contains the following sections: • Logging In to the Web Client, page • Overview of the Live Interface, page • Configuring the Live Interface, page •...

  • Page 22: Overview Of The Live Interface

    40X ZOOM IR PTZ DOME CAMERA USER GUIDE The password must be at least 8 characters long and contain at least one lowercase letter, one number, and one special character. The password cannot be blank. Overview of the Live Interface Figure 10 shows the layout of the web client’s Live interface.
  • Page 23 40X ZOOM IR PTZ DOME CAMERA USER GUIDE Table 1 Live Configuration Controls Opens the Image Adjustment panel. Move the sliders to adjust the image Image Adjustment brightness, contrast, hue, or saturation. Click the – and + signs to make fine adjustments. To restore the settings to their default values (64), click Reset.

  • Page 24: Working In The Live Interface

    The Regional Focus area will come into sharper focus automatically. Add information on the Live interface, and also manage Mark added comments Click this button to select wiper operation: Start/Stop/Once. Wiper Note: Only HDZ402LIWV/HDZ404LIWV/HDZ408LIWV model support Wiper.

  • Page 25: Setting Up Live Video Streaming

    40X ZOOM IR PTZ DOME CAMERA USER GUIDE Setting Up Live Video Streaming In the upper right corner of the screen, immediately above the video window, you can set the stream type and protocol for live video streaming. Setting the Stream Type To set the stream type, in the Stream Type list, select Main Stream, Sub Stream 1, or Sub Stream 2.

  • Page 26: Ptz Operation

    40X ZOOM IR PTZ DOME CAMERA USER GUIDE 3.PTZ OPERATION This chapter contains the following sections: Configuring PTZ Functions, page • Operating PTZ Controls, page • Configuring PTZ Functions You can configure PTZ functions on the Setting  PTZ  Function page. Configuring Presets To add a preset: 1.

  • Page 27: Configuring Tours

    40X ZOOM IR PTZ DOME CAMERA USER GUIDE 2. In the Preset section, click Add. A preset is added to the list. 3. Click the Save button to save the preset. 4. To add another preset, repeat steps 2 to 4 above. You can add up to 80 presets. To rename a preset: •...
  • Page 28 40X ZOOM IR PTZ DOME CAMERA USER GUIDE 3. To change the preset, double-click the number in the Preset column, click the down arrow to expand the list, and then select a new preset from the list. 4. To change the duration time, double-click the number in the Duration column. Type a new duration time (in seconds), and then press Enter.

  • Page 29: Configuring Scans

    40X ZOOM IR PTZ DOME CAMERA USER GUIDE Configuring Scans To set up a scan: 1. In the Auto Scan section, select the scan number that you want to configure from the Scan No. list. You can configure up to 5 scans. 2.

  • Page 30: Configuring Auto Pan

    40X ZOOM IR PTZ DOME CAMERA USER GUIDE 3. Click Start Record to start recording. 4. Using the controls below the preview window, move the camera and adjust the zoom, focus, and iris as desired. 5. Click Stop Record to stop recording. 6.

  • Page 31: Configuring Powerup Settings

    40X ZOOM IR PTZ DOME CAMERA USER GUIDE 1. In the Idle Motion area, select the Enable check box. 2. Next to Idle Motion, select the action that you want the camera to perform when it is idle for the specified time. Click Preset, Tour, Scan, or Pattern. 3.

  • Page 32: Configuring Time Tasks

    40X ZOOM IR PTZ DOME CAMERA USER GUIDE To set PTZ limits: 8. Using the PTZ controls below the preview window, move the camera to the upper tilt limit and then, next to Up Line, click Setting. 9. Move the camera to the lower tilt limit and then, next to Down Line, click Setting. 10.

  • Page 33: Restarting The Ptz

    40X ZOOM IR PTZ DOME CAMERA USER GUIDE 6. Set the days and times when you want the time task function to be active, and then click Save. 7. Click Save to apply your settings. To delete all time tasks, Click Clear All. Restarting the PTZ To restart the PTZ dome, in the PTZ Restart area, click PTZ Restart.
  • Page 34 40X ZOOM IR PTZ DOME CAMERA USER GUIDE The PTZ Control panel consists of direction arrows, the rapid positioning button (in the center), the PTZ speed setting, and buttons for adjusting zoom, focus, and iris settings. A virtual joystick is also available in case you prefer to use that instead of the direction arrows.

  • Page 35: Playing Back Recorded Video

    40X ZOOM IR PTZ DOME CAMERA USER GUIDE 4.PLAYING BACK RECORDED VIDEO This chapter contains the following sections: • Overview of the Playback Interface, page • Playing Back Recorded Video, page • Downloading Recorded Video, page • Viewing Snapshots, page Overview of the Playback Interface Figure 13 shows the layout of the web client’s Playback interface.

  • Page 36: Video Clip Controls

    40X ZOOM IR PTZ DOME CAMERA USER GUIDE Table 3 Playback Controls Click to play recorded video. Play/Pause Click to pause playback. Pause Click to stop playback. Stop Click to advance to the next frame when playback is Next Frame paused.

  • Page 37: Playing Back Recorded Video

    40X ZOOM IR PTZ DOME CAMERA USER GUIDE Figure 16 Timeline Area Table 5 Timeline Controls Displays video saved during normally scheduled recording in Gener the timeline. Displays video saved during a motion detection event in the Event Record timeline. Type Alarm Displays video saved during an alarm event in the timeline.

  • Page 38: Downloading Recorded Video

    40X ZOOM IR PTZ DOME CAMERA USER GUIDE 3. Locate the file that you want to play back. Above the calendar, select the month and year that you want to search. On the calendar, click the date that you want to search. Recordings for the selected date appear in the timeline (color coded according to recording type).

  • Page 39: Viewing Snapshots

    40X ZOOM IR PTZ DOME CAMERA USER GUIDE You cannot download the clip while the video file is still open in the web Note client. The clip is saved to the location specified in Setting Camera  VideoPath  Video Clips. Viewing Snapshots You can take snapshots of video during playback by clicking the Snapshot button The snapshot is saved to the location specified in Setting...

  • Page 40: Configuring Camera Settings

    40X ZOOM IR PTZ DOME CAMERA USER GUIDE 5.CONFIGURING CAMERA SETTINGS This chapters contains the following sections: • Configuring Camera Conditions, page • Configuring Video Settings, page • Configuring Audio Settings, page Configuring Camera Conditions Go to Setting  Camera  Conditions. This section describes how to configure camera properties (picture, exposure, lighting compensation, white balance, day and night, IR light, etc.).
  • Page 41 40X ZOOM IR PTZ DOME CAMERA USER GUIDE Adjust the brightness, contrast, saturation, sharpness, chroma control, sharpness, and sharpness control, and gamma levels by dragging the slider left or right to decrease or increase the value. Click the – and + signs to make fine adjustments. To flip the image, set Flip to 180°.
  • Page 42 40X ZOOM IR PTZ DOME CAMERA USER GUIDE Backlight In the Backlight area, you can apply backlight compensation (BLC), highlight compensation (HLC), or wide dynamic range (WDR) adjustment to the image. Set Backlight to OFF, BLC, HLC, or WDR. Corrects the exposure of strongly backlit scenes. To apply BLC to the entire scene, click Default.
  • Page 43 40X ZOOM IR PTZ DOME CAMERA USER GUIDE By default, the camera automatically outputs color video or black-and-white video depending on the amount of light in the scene. To output only color video, set Mode to Color. To output only black-and-white video, set Mode to Black & White. Sensitivity controls the sensitivity to lighting changes that cause the camera to switch between day (color) and night (black-and-white) mode.

  • Page 44: Managing Profiles

    40X ZOOM IR PTZ DOME CAMERA USER GUIDE Zoom Prio: It can auto adjust the brightness of IR light according to the actual zoom rate. SmartIR: The device can control IR light brightness according to the actual zoom rate and overexposure. Manual: It is to set the brightness value of IR light manually.

  • Page 45: Configuring Video Settings

    40X ZOOM IR PTZ DOME CAMERA USER GUIDE Configuring Video Settings This section describes how to configure camera properties (picture, exposure, white balance, day and night, and lighting compensation) and video streaming properties (format, resolution, frame rate, bit rate, and I-frame interval). Configuring Video You can configure video streaming properties on the Setting ...

  • Page 46: Configuring Snapshot

    40X ZOOM IR PTZ DOME CAMERA USER GUIDE storage savings of up to 60 percent and bandwidth savings of up to 40 percent over H.264 alone. Resolution In the Resolution box, select a resolution from the list. The available options differ between the main stream and sub streams.

  • Page 47: Configuring Overlay

    40X ZOOM IR PTZ DOME CAMERA USER GUIDE Image Size The image size is determined by the main stream resolution setting. It is not configurable. Quality Set the Quality to a value between 1 (lowest) and 6 (highest). Interval Select a snapshot frequency between 1 snapshot per second (1s) and 7 snapshots per second (7s), or click Customized to define a custom setting between 1 and 16 seconds.
  • Page 48 40X ZOOM IR PTZ DOME CAMERA USER GUIDE To hide the channel title, click Disable, and then click Save. Time Title You can configure the time title properties on the Setting  Camera  Video  Overlay  Time Title page. To display the time title, click Enable, and then click Save.
  • Page 49 40X ZOOM IR PTZ DOME CAMERA USER GUIDE To display preset, temperature, zoom magnification, and/or direction information, click the corresponding Enable button(s). The PTZ coordinates and pattern are displayed by default. To hide these overlays, click Disable. To display custom text, next to Text Overlay, click Enable, and then enter the desired text in the Input Text field.
  • Page 50 40X ZOOM IR PTZ DOME CAMERA USER GUIDE Custom Overlay You can configure custom overlay on the Setting  Camera  Video  Overlay  Custom Overlay page. Abnormal You can configure picture overlay properties on the Setting  Camera  Video  Overlay ...

  • Page 51: Configuring Roi

    40X ZOOM IR PTZ DOME CAMERA USER GUIDE Configuring ROI You can configure regions of interest (ROI) on the Setting  Camera  Video  ROI page. To enable the ROI function, click Enable. In the preview window, drag your mouse over the portion of the scene that you want to designate as a region of interest, select an Image Quality level between 1 (lowest) and 6 (highest), and then click Save.
  • Page 52 40X ZOOM IR PTZ DOME CAMERA USER GUIDE To enable audio for the stream, select the Enable check box, select the format from the list and then select a sampling frequency (8 or 16 kHz). In the Properties area, select the audio input type (LineIn, Microphone), enable or disable noise filtering, and adjust the microphone and/or speaker volumes by moving the sliders.

  • Page 53: Configuring Network Settings

    40X ZOOM IR PTZ DOME CAMERA USER GUIDE 6.CONFIGURING NETWORK SETTINGS This chapter contains the following sections: • Configuring TCP/IP, page • Configuring Port, page • Configuring RTSP, page • Configuring PPPoE, page Configuring DDNS, page • Configuring SMTP(Email), page •...
  • Page 54 40X ZOOM IR PTZ DOME CAMERA USER GUIDE IPv4 Address Configuration By default, the camera uses IPv4 and obtains IP settings automatically via DHCP. In the Hostname field, enter a nickname for the camera that can be mapped to the IP address and used to identify the camera.

  • Page 55: Configuring Port

    40X ZOOM IR PTZ DOME CAMERA USER GUIDE ARP/Ping You can assign an IP address to the camera using the ARP/Ping service. To enable ARP/Ping to set the IP address: Obtain an unused IP address in the same LAN as your PC. Write down the MAC address of the camera (it is listed on the label).

  • Page 56: Configuring Rtsp

    40X ZOOM IR PTZ DOME CAMERA USER GUIDE By default, the maximum number of simultaneous connections the camera will support is set to 10. To change this setting, in the Max Connections field, enter a value between 1 and 20. If you want, you can change the TCP, UDP, HTTP, RTSP, and HTTPS port numbers from their defaults.

  • Page 57: Configuring Ddns

    In the Update Period field, enter the interval in minutes between address updates sent to the DDNS server. If you selected Honeywell DDNS as your DDNS service, the domain name is set to the camera’s MAC address by default and no user name or password are required.

  • Page 58: Configuring Upnp

    40X ZOOM IR PTZ DOME CAMERA USER GUIDE To set up email notifications: In the SMTP Server and Port fields, enter the SMTP server and port information. In the User Name and Password fields, enter the sender’s email user name and password.

  • Page 59: Configuring Snmp

    40X ZOOM IR PTZ DOME CAMERA USER GUIDE The UPnP protocol is used to detect network devices with clients running Windows. To enable UPnP, select the Enable check box. The camera can now be detected by Windows' built-in network browser (My Network Places in Windows XP; Network in Windows 7).

  • Page 60: Configuring Bonjour

    40X ZOOM IR PTZ DOME CAMERA USER GUIDE SNMP is a protocol for collecting, organizing, and exchanging management information between managed devices on a network. To enable SNMP: 1. Next to SNMP Version, select the SNMP version(s) that you want to use. For best security, use SNMPv3.

  • Page 61: Configuring Multicast

    40X ZOOM IR PTZ DOME CAMERA USER GUIDE Configuring Multicast You can configure multicast settings on the Setting  Network  Multicast page. Multicast is a transmission mode for data packets that minimizes bandwidth use and CPU load when multiple computers are receiving the same data packet simultaneously.

  • Page 62: Configuring Qos

    Configuring Certificates You can configure certificate settings on the Setting Network  Certificate page. To install a Honeywell-signed root certificate: 1. Click Export, navigate to the directory where you want to save the certificate (ca.crt) on your PC, and then click Save.

  • Page 63: Configuring Access Platform

    40X ZOOM IR PTZ DOME CAMERA USER GUIDE 4. Click Next to continue. 5. Click Place all certificates in the following store, click Browse, click Trusted Root Certification Authorities, and then click OK. 6. Click Next, and then click Finish to close the Certificate Import Wizard. A confirmation dialog box appears with the message “The import was successful.”...

  • Page 64: Filtering Ip/Mac Address

    40X ZOOM IR PTZ DOME CAMERA USER GUIDE Filtering IP/MAC Address   You can configure IP filter settings on the Setting System Safety page. When the IP filter is enabled, remote access to the camera is restricted to specific IP or MAC addresses.
  • Page 65 40X ZOOM IR PTZ DOME CAMERA USER GUIDE 3. Select the Approved Users check box, and then click Save to apply the settings. Editing IP/Mac Addresses To edit an IP/MAC address: In Address List, click the Modify icon of the address that you want to edit. In the Modify IP/MAC window, edit the address as needed, and then click Save.

  • Page 66: Configuring Event Manage

    40X ZOOM IR PTZ DOME CAMERA USER GUIDE 7.CONFIGURING EVENT MANAGE This chapter contains the following sections: • Configuring Video Detection, page • Configuring Audio Detection, page • Configuring Smart Plan, page • Configuring Deep IVS, page Video Structuralization, page •...
  • Page 67 40X ZOOM IR PTZ DOME CAMERA USER GUIDE To enable motion detection: 1. Select the Enable check box. 2. Next to Alarm Period, click Setting. The Alarm Period window opens. 3. Set the days and times when you want the alarm function to be active, and then click save.
  • Page 68 40X ZOOM IR PTZ DOME CAMERA USER GUIDE You can define up to 4 motion detection profiles (regions), each with different sensitivity and threshold settings. Next to Region, click one of the solid color tiles to select a region. Drag the Sensitivity and Threshold sliders to the desired values.

  • Page 69: Configuring Video Tamper

    40X ZOOM IR PTZ DOME CAMERA USER GUIDE Configuring Video Tamper You can configure camera tampering event settings on the Setting  Event  Video Detection  Video Tamper page. To enable camera tampering detection: 1. Select the Enable Tamper Detect and/or the Enable Defocus Detect check box(es). 2.

  • Page 70: Configuring Scene Changing

    40X ZOOM IR PTZ DOME CAMERA USER GUIDE For the snapshot to be attached to the email notification, the Attachment check box must be selected in Setting  Network  SMTP(Email). Note 11. Click Save to apply the settings. Configuring Scene Changing You can configure scene change settings on the Setting Event Video Detection ...
  • Page 71 40X ZOOM IR PTZ DOME CAMERA USER GUIDE To enable audio event detection: 1. To detect faults in the audio input, select the Enable Input Abnormality check box. 2. To detect unusual changes in the audio input: Select the Enable Intensity Change check box. b.

  • Page 72: Configuring Smart Plan

    40X ZOOM IR PTZ DOME CAMERA USER GUIDE PTZ check box and select the desired action from the Activation list. 12. To take a snapshot when an audio event is detected, select the Snapshot check box. For the snapshot to be attached to the email notification, the Attachment check box must be selected in Setting ...

  • Page 73: Configuring Deep Ivs

    40X ZOOM IR PTZ DOME CAMERA USER GUIDE Configuring Deep IVS You can configure auto tracking settings on the Setting  Event  Deep IVS page. Rule Configuration Basic Requirements for the Scene The target size shall not exceed 10% of the image. •...
  • Page 74 40X ZOOM IR PTZ DOME CAMERA USER GUIDE Set smart rules. Follow these steps to complete the configuration. 1. Select Setting  Event  IVS  Rule Config. 2. Select the presets to be configured with smart rules. 3. Click to add smart rules.
  • Page 75 40X ZOOM IR PTZ DOME CAMERA USER GUIDE When a target is detected, a rectangular box is displayed, and when the center point of the rectangular box crosses the two drawn fence boundaries successively, an alarm for crossing the fence is triggered. Select Cross Fence Detection from the Rule Type list.
  • Page 76 40X ZOOM IR PTZ DOME CAMERA USER GUIDE Min Size maximum or minimum size. Max Size: Set the maximum size of targets to be filtered. When the  target is larger than this size, the system will ignore it. The unit is pixel. Min Size: Set the minimum size of targets to be filtered.
  • Page 77 40X ZOOM IR PTZ DOME CAMERA USER GUIDE 4. Click Save. Intrusion Intrusion includes crossing areas and in-area functions. • Crossing area means an alarm will be triggered when a target enters or leaves the area. In-area function means an alarm will be triggered when a specified number •...
  • Page 78 40X ZOOM IR PTZ DOME CAMERA USER GUIDE Action Configure intrusion action, and you can select Appear or Cross. Direction Select the crossing direction from Enters, Exits, and Enter & Exit. For other parameters, see Tripwire Click Save. Abandoned Object An alarm will be triggered when the selected target in the monitoring scene stays in the screen for more than the set time.
  • Page 79 40X ZOOM IR PTZ DOME CAMERA USER GUIDE Fast Moving Detection The Device can calculate the actual moving speed of the target according to the calibration. If the moving speed exceeds the defined speed, an alarm is triggered. The speed triggering alarms is linked to the sensitivity, and the sensitivity of 1–10 corresponds to the actual speed of 10 m/s–1 m/s).
  • Page 80 40X ZOOM IR PTZ DOME CAMERA USER GUIDE Click Draw Rule to draw rules on the monitoring screen. Click Clear to the right of Draw Rule to clear all drawn rules. Configure parameters as needed. Duration: Set the shortest time from the target appearing in the area to an alarm being triggered.
  • Page 81 40X ZOOM IR PTZ DOME CAMERA USER GUIDE Click Draw Rule to draw rules on the monitoring screen. Configure parameters as needed. Parameter Description Set the shortest time from the target appearing in the area to an alarm being Duration triggered.
  • Page 82 40X ZOOM IR PTZ DOME CAMERA USER GUIDE Click Draw Rule, and you can draw rules on the monitoring screen. Click Clear to the right of Draw Rule, and you can clear all drawn rules. Configure parameters as needed. Table 10 Missing object parameter Parameter Description Duration...

  • Page 83: Global Setup

    40X ZOOM IR PTZ DOME CAMERA USER GUIDE Click Draw Rule to draw rules on the monitoring screen. Configure parameters as needed. Duration: Set the shortest time from the target appearing in the area to an alarm being triggered. Click Save. Global Setup The Aim and Principle of Depth of Field Calibration According to 1 plane line and 3 height lines calibrated by the user and the...
  • Page 84 40X ZOOM IR PTZ DOME CAMERA USER GUIDE Set the calibration area, and the calibration area shall be drawn in the same horizontal • plane. Select Setting > Event Manage > Deep IVS > Global Setup. Select the preset to set the global setup function. The preset must have already been configured with a smart plan.

  • Page 85: Video Structuralization

    40X ZOOM IR PTZ DOME CAMERA USER GUIDE Video Structuralization With the function, the system can count the number of motor vehicles, non-motor vehicles and people in the monitoring screen, identify the features of the vehicles and people in the scene, and take snapshots. Before using video metadata, you need to enable the function in the Smart Plan.

  • Page 86: Picture Overlay

    40X ZOOM IR PTZ DOME CAMERA USER GUIDE Parameter Description Select the check box to enable the OSD overlay. The statistics will be displayed on the Live interface in the form of OSD information. Click it to clear the statistics of motor vehicles, non-motor Clear vehicles and people.

  • Page 87: Configuring Alarm

    40X ZOOM IR PTZ DOME CAMERA USER GUIDE Configuring Alarm You can configure alarm event settings on the Setting  Event  Alarm page. To enable the alarm function: 1. Select the Enable check box. 2. From the Alarm Input list, select the alarm input that you want to configure (Alarm1 or Alarm2).

  • Page 88: Configuring Abnormality

    40X ZOOM IR PTZ DOME CAMERA USER GUIDE between 0 and 100 seconds. The system will only allow one alarm event within this period. 6. Set Sensor Type to NO (normally open) or NC (normally closed), depending on the alarm input type. 7.

  • Page 89: Configuring Network Event Settings

    40X ZOOM IR PTZ DOME CAMERA USER GUIDE To enable SD card event detection: 1. On the SD Card tab, select the event type that you want to configure from the Event Type list (No SD Card, SD Card Error, or Capacity Warning). 2.

  • Page 90: Configuring Illegal Access

    40X ZOOM IR PTZ DOME CAMERA USER GUIDE 4. To start recording video when the event is detected, select the Record check box. 5. In the Record Delay field, enter the number of seconds that the system will continue to record video after the event has ended. Enter a value between 10 and 300.

  • Page 91: Configuring Storage Settings

    40X ZOOM IR PTZ DOME CAMERA USER GUIDE 8.CONFIGURING STORAGE SETTINGS This chapter contains the following sections: Configuring Schedule, page • Configuring Snapshot by Location, page • Configuring Destination, page • Configuring Record Control, page • Configuring Schedule You can set up both regular and holiday schedules for recording video and saving snapshots on the Setting...

  • Page 92: Configuring Snapshot By Location

    40X ZOOM IR PTZ DOME CAMERA USER GUIDE On the Record tab, click the Setting buttons to configure weekend, weekday, and holiday settings, for general video recording as well as motion detection and alarm recording. You can configure up to 6 different recording periods per day. Click Save to apply the settings.

  • Page 93: Configuring Destination

    40X ZOOM IR PTZ DOME CAMERA USER GUIDE Configuring Destination You can configure recording storage settings on the Setting  Storage  Destination page. Configuring Paths On the Path tab, you can specify where you want recorded video and snapshots— whether scheduled or triggered by a motion detection or alarm event—to be saved: to a local SD card, to an FTP server, or to an NAS disk.
  • Page 94 SD card correctly without format it. • Honeywell suggests you backup SD card data and format SD card manually Note before using it for camera recording because the PC can’t read the video and...

  • Page 95: Configuring Record Control

    40X ZOOM IR PTZ DOME CAMERA USER GUIDE number of the FTP server. 3. In the Username and Password fields, enter the user name and password of the server. 4. In the Remote Directory field, enter the directory on the server where the recorded video/snapshot files will be stored.
  • Page 96 40X ZOOM IR PTZ DOME CAMERA USER GUIDE By default, the pre-event record time (the number of seconds the system stores in a buffer) is 5 seconds. To change this setting, enter a time between 0 and 5 seconds in the Pre-Event Record field. From the Disk Full list, select Overwrite or Stop.

  • Page 97: Configuring System Settings

    40X ZOOM IR PTZ DOME CAMERA USER GUIDE 9.CONFIGURING SYSTEM SETTINGS This chapter contains the following sections: General, page • Account, page • Default, page • Import/Export, page • • Auto Maintain, page • Upgrade, page Wiper Configuration, page • General General You can configure the device name, user interface language, video...

  • Page 98: Date And Time

    40X ZOOM IR PTZ DOME CAMERA USER GUIDE Date and Time You can configure the date and time settings on the Setting  System  General  Date&Time page. To change the Date and Time Format: You can change the format of the date and time that appear in the text overlay on the video.

  • Page 99: Account

    40X ZOOM IR PTZ DOME CAMERA USER GUIDE and 30. 6. Click Save to apply the settings. Account You can manage user accounts and permissions on the Setting  System  Account page. Managing Users You can create, modify, or delete a user account. Creating a User Account You can create a new user account and assign permissions to it.
  • Page 100 40X ZOOM IR PTZ DOME CAMERA USER GUIDE In the Password field, enter a password. The password must be at least 8 characters in length and contain a combination of uppercase and lowercase letters, at least one number, and at least one special character. 3.

  • Page 101: Managing Groups

    40X ZOOM IR PTZ DOME CAMERA USER GUIDE Deleting a User Account You can delete any user account that you have created (you cannot delete the admin user). To delete a user account: 1. On the User Name tab, select the user account that you want to delete (your selection will be highlighted yellow), and then click the Delete icon 2.
  • Page 102 40X ZOOM IR PTZ DOME CAMERA USER GUIDE Clear Log The user can clear logs in Setting  Information  Log. Upgrade The user can upgrade firmware in Setting  System  Upgrade. The user can access the settings in Setting  System  Auto Auto Maintain Maintain.

  • Page 103: Default

    40X ZOOM IR PTZ DOME CAMERA USER GUIDE Deleting a Group You can delete any custom group that you have created (you cannot delete the administrator group or the user group). To delete a group: On the Group tab, select the group that you want to delete (your selection will be highlighted yellow), and then click the Delete icon A confirmation message appears.

  • Page 104: Auto Maintain

    40X ZOOM IR PTZ DOME CAMERA USER GUIDE Import/Export page. To back up a configuration: 1. Click Export. The Save As window opens. 2. By default, the backup file is named DeviceConfig.backup. Rename the file if you want, navigate to the directory where you want to save the file, and then click Save.

  • Page 105: Wiper Configuration

    4. Reboot the camera. Note If you attempt to install an older version of the firmware, a warning message will appear. Wiper Configuration You can do the wiper settings on the Setting  System  Peripheral page. Note HDZ402LIWV/HDZ404LIWV/HDZ408LIWV support Wiper function.

  • Page 106: 10.Viewing System Information

    40X ZOOM IR PTZ DOME CAMERA USER GUIDE 10.VIEWING SYSTEM INFORMATION This chapter contains the following sections: • Viewing Version Information, page • Managing Logs, page • Viewing Online Users, page Viewing Version Information You can view the camera’s firmware version, web client version, ONVIF version, PTZ version, and serial number on the Setting ...

  • Page 107: Backing Up Logs

    40X ZOOM IR PTZ DOME CAMERA USER GUIDE To view detailed information about a specific log, click the log. The information is displayed in the System Log Information box. Backing Up Logs To back up a log: Click Backup. The Save As window opens. By default, the backup file is named LogBackup[YYYY-MM-DD].txt.

  • Page 108: Appendix A Special Presets

    Toggle Defog Toggle between OFF and AUTO. Toggle Auto focus Toggle between semi-auto and manual auto focus. Run Wiper Once Only for HDZ402LIWV/HDZ404LIWV/HDZ408LIWV Toggle Relay 1 Toggle between ON and OFF. Toggle Relay 2 Toggle between ON and OFF. Toggle WDR Toggle between OFF and WDR value.
  • Page 109 Honeywell Building Technologies – Security Americas (Head Honeywell Building Technologies – Security Россия и СНГ Office) Honeywell Commercial Security 121059 Moscow, 715 Peachtree St. NE UI, Kiev 7 Atlanta, GA 30308 Russia Tel: +1 800 323 4576 Tel: +7 (495) 797-93-71 Honeywell Building Technologies –...

This manual is also suitable for:

Hdz404liwvHdz408liwvHdz402likvHdz404likvHdz408likv

Table of Contents