Table of Contents
Quick Links
SAFETY PRECAUTIONS
WARNING –
OF FIRE, ELECTRIC SHOCK OR INJURY TO PERSONS,
OBSERVE THE FOLLOWING:
A. Use this unit only in the manner intended
by the manufacturer. If you have questions,
contact the manufacturer.
B. Before servicing or cleaning unit, switch
power off at service panel and lock the service
disconnecting means to prevent power from
being switched on accidentally. When the
service disconnecting means cannot be locked,
securely fasten a prominent warning device,
such as a tag, to the service panel.
C. Do not use this unit with any solid-state speed
control device.
D. Use with approved cord-connection kit only.
E. This unit must be grounded.
GEAppliances.com
49-80421-1
09-09 JR
Use and Care & Installation Guide
Safety Instructions
Operating Instructions
Automatic Heat Sensor ...........................3
Controls .....................................................2
Cleaning
....................................................
Filter............................................................3
Light Bulb Replacement..........................3
IMPORTANT SAFETY INFORMATION.
READ ALL INSTRUCTIONS BEFORE USING.
TO REDUCE THE RISK
30 " Vented Hood
...Front Cover, 2
.........2, 3
3
WARNING –
OF A RANGE TOP GREASE FIRE:
A. Never leave surface units unattended at high
settings. Boilovers cause smoking and greasy
spillovers that may ignite. Heat oils slowly on
low or medium settings.
B. Always turn hood ON when cooking on high
heat or when flambeing food (i.e., Crepes
Suzette, Cherries Jubilee, Peppercorn Beef
Flambé).
C. Clean ventilating fans frequently. Grease should
not be allowed to accumulate on fan or filter.
D. Use proper pan size. Always use cookware
appropriate for the size of the surface
element.
Models: JV394 JV395 JV396 JV930
Installation
.....................................4–6
Damper/Duct Connector .........................5
Electrical Wiring .......................................6
Filter Panel.............................................3, 5
Mounting Brackets...................................5
Consumer Support
Important Phone Numbers...Back Cover
Warranty ....................................................7
TO REDUCE THE RISK
(continued next page)
....Back Cover
Table of Contents
Related Manuals for GE JV930SCBR
Summary of Contents for GE JV930SCBR
-
Page 1: Operating Instructions
Use and Care & Installation Guide Safety Instructions Operating Instructions Automatic Heat Sensor ...3 Controls ...2 Cleaning Filter...3 Light Bulb Replacement...3 IMPORTANT SAFETY INFORMATION. READ ALL INSTRUCTIONS BEFORE USING. SAFETY PRECAUTIONS WARNING – OF FIRE, ELECTRIC SHOCK OR INJURY TO PERSONS, OBSERVE THE FOLLOWING: A. - Page 2 IMPORTANT SAFETY INFORMATION. READ ALL INSTRUCTIONS BEFORE USING. SAFETY PRECAUTIONS CAUTION – FOR GENERAL VENTILATING USE ONLY. DO NOT USE TO EXHAUST HAZARDOUS OR EXPLOSIVE MATERIALS AND VAPORS. WARNING – TO REDUCE THE RISK OF INJURY TO PERSONS IN THE EVENT OF A RANGE TOP GREASE FIRE, OBSERVE THE FOLLOWING*: A.
-
Page 3: Automatic Heat Sensor
Automatic Heat Sensor WARNING: ALWAYS DISCONNECT ELECTRIC POWER SUPPLY BEFORE SERVICING HOOD. Filter Panel clip Light Bulb Replacement ″ To check or replace tube: CARE AND CLEANING Glass visor Filter panel Stainless Steel Do not use a steel wool pad; it will scratch the surface. -
Page 4: Installation Instructions
INSTALLATION INSTRUCTIONS TOOLS YOU WILL NEED Flat blade and Phillips screwdrivers Duct tape Electric drill Saw (saber or keyhole) Tape measure Pliers Flashlight Caulking PLAN THE INSTALLATION CAUTION: Remove the house fuse or open the circuit breaker before beginning the installation. Your new hood will fit a standard 30″... - Page 5 INSTALLATION INSTRUCTIONS 2. Attach the damper/duct connector. Use two (2) screws (provided) to attach the connector to the housing. The damper flap should open in the direction indicated by the arrow. 3. Remove the electrical knockout. Choose either the top or side of the housing for the electrical cable entrance.
- Page 6 INSTALLATION INSTRUCTIONS Insert two (2) screws, short or long as appropriate, through the control box and into the other mounting bracket. Do not tighten the screws completely. 8. Secure the hood to the cabinet. Align the hood with the sides and front edge of the cabinet.
- Page 7 Customer Care ® technician. To schedule service on-line, visit us at GEAppliances.com, or call 800.GE.CARES (800.432.2737). Please have serial number and model number available when calling for service. Failure of the product if it is used for other than its intended purpose or used commercially.
-
Page 8: Consumer Support
Caution must be exercised, since improper servicing may cause unsafe operation. Contact Us If you are not satisfied with the service you receive from GE, contact us on our Website with all the details including your phone number, or write to: General Manager, Customer Relations Register Your Appliance Register your new appliance on-line—at your convenience! Timely product registration will allow for...