GE JGBS14PCDWW Owner's Manual & Installation Instructions page 28
Non-self-cleaning gas ranges
Hide thumbs
Also See for JGBS14PCDWW:
- Owner's manual & installation instructions (60 pages) ,
- Dimensions and installation information (2 pages)
Table of Contents
FOR YOUR SAFETY
Do not store or use combustible materials,
gasoline or other flammable vapors and liquids
in the vicinity of this or any other appliance. If
you smell gas:
1
Open windows.
2
Don't touch electrical switches.
3
Extinguish any open flame.
4
Immediately call your gas supplier.
TOOLS YOU WILL NEED
Phillips screwdriver
Flat-blade screwdriver 3/16" or
smaller
Pencil and ruler
Level
PART INCLUDED
Anti-tip bracket kit
Installation Instructions
Open-end or
adjustable wrench
Pipe wrenches (2)
(one for backup)
Drill, awl or nail
28
MATERIALS YOU MAY NEED
• Gas line shut-off valve
• Pipe joint sealant or UL-approved pipe thread
tape with Teflon* that resists action of natural
and LP gases
• Flexible metal appliance connector (1/2" I.D.).
A 5-foot length is recommended for ease of
installation but other lengths are acceptable.
Never use an old connector when installing
a new range.
• Flare union adapter for connection to gas
supply line (3/4" or 1/2" NPT x 1/2" I.D.)
• Flare union adapter for connection to pressure
regulator on range (1/2" NPT x 1/2" I.D.)
• Liquid leak detector or soapy water
• Lag bolt or 1/2" O.D. sleeve anchor (for concrete
floors only)
• Long matches and/or match holder (for models
equipped with standing pilots)
*Teflon: Registered trademark of DuPont
Table of Contents
Troubleshooting
