Olympus C-3030 Zoom Camera Manual
Hide thumbs Also See for C-3030 Zoom:

Quick Links

Recommended Camera settings for OneShot360™
After attaching the OneShot360 unit and powering the camera on in A/S/M mode:
• Image Quality: Press the menu button, located on the lower right side of
the LCD screen, and use the jog dial to set the image quality to SHQ for
best quality.
• Zoom: Use the Zoom to exactly fill the digital camera LCD viewer screen
with the circular image. Push or pull the lever on the outside of the shutter
release button to achieve this. If you zoom in too much, you will lose part
of the field of view. If you zoom in too little, you will not get maximum
resolution. Note also that the OneShot360 image may not be exactly
centered in the LCD screen – this is normal.
• White Balance: Set the white balance to Automatic. This setting is
adequate for most shots. To set the white balance, press the Menu button,
and press the down arrow on the jog dial until you have selected WB. Use
the right arrow to see the white balance options, and select the AUTO
setting. Press the OK button to finalize your selection.
• Flash: Disable the flash by pressing the flash button until you see the
flash disabled icon in the control panel. The flash button is located to the
left of the jog dial.
• Focus: To focus your OneShot360 image, manually set the focal
distance. To do this, press the MF button, and then press the right arrow
on the jog dial to select MF for manual focus. Now you can use the
up/down arrows on the jog dial to set a manual focus distance. A setting of
10 feet is recommended.
• Aperture Priority Mode: Set the camera to aperture priority ("A") mode.
To do this, press the menu button, and then use the down arrow until you
see the A/S/M mode selection. Now use the right arrow to see the
selections and choose A for Aperture Priority. Use the OK button to
finalize your selection.
• Aperture: Use the up/down arrows to select an aperture setting of f7.0.
Take care to watch the shutter speed when in aperture priority mode. If
the light level is low, you may need a tripod when the shutter speed is
slower than 1/125sec.
Doc. 000235, Rev. B
Camera
Guide
Olympus C-3030 Zoom
Olympus C-3030 Zoom
Page 1 of 3
R
R
EMOTE
EALITY
4 Technology Drive
Westborough, MA 01581-0756
866-898-1010
www.remotereality.com
loading

Summary of Contents for Olympus C-3030 Zoom

  • Page 1 Guide Westborough, MA 01581-0756 866-898-1010 Olympus C-3030 Zoom Recommended Camera settings for OneShot360™ After attaching the OneShot360 unit and powering the camera on in A/S/M mode: • Image Quality: Press the menu button, located on the lower right side of the LCD screen, and use the jog dial to set the image quality to SHQ for best quality.
  • Page 2 Because the 360Plus uses 4 images, it is best to make sure that all 4 images have the same exposure. This will ensure the end result will have a continuous tone and density throughout the image. The best way to do this with the Olympus C-3030 is to: •...
  • Page 3 • Do NOT re-level between shots. It is normal for the bubble level to shift between shots. Re-leveling is not necessary and not recommended. • When processing 360Plus images in the RemoteReality software, use the Olympus 2000 camera selection. Doc. 000235, Rev. B Olympus C-3030 Zoom www.remotereality.com...