Table of Contents
Quick Links
Table of Contents
Related Manuals for RCT Power 3.8
Summary of Contents for RCT Power 3.8
- Page 1 MANUAL Power Battery 3.8 / 5.7 / 7.6 / 9.6 / 11.5...
- Page 2 The reproduction of common names, trade names, brand names, product designations, etc. in these operating instructions Power Battery 3.8 / 5.7 / 7.6 / 9.6 / 11.5 does not entitle the user to consider and use such names as free within the meaning of trademark and brand protection...
-
Page 3: Table Of Contents
Manual 3.8 / 5.7 / 7.6 / 9.6 / 11.5 Table of content Overview ............................1 Scope of this document ............................1 Intended use ................................1 Explanation of symbols ............................2 Warranty and liability .............................. 3 Declaration of conformity ............................3 Application Example .............................. -
Page 4: Overview
Overview Scope of this document This instruction manual is an important part of the battery system Power Battery 3.8 / 5.7 / 7.6 / 9.6 / 11.5. It contains information about working safely and efficiently with the battery system. Always keep the operating instructions near the battery system. -
Page 5: Explanation Of Symbols
Manual 3.8 / 5.7 / 7.6 / 9.6 / 11.5 Explanation of symbols The following symbols may appear on the type plate and/or on the unit. These symbols must always be observed: Observe the operating instructions! Acid traces in the eyes or on the skin clean with lot of clear water. -
Page 6: Warranty And Liability
RCT Power GmbH . Storage RCT Power GmbH does not accept any warranty for damage caused by incorrect storage, → chapter 7.1 "Storage", page 21. Transport We would like to point out that improper transport does not entitle the user to any replacement or warranty claims. In any case, please consult RCT Power GmbH before transporting the system. -
Page 7: Application Example
Beschreibung Bemerkung PV-Generator Monocrystalline silicon; polycrystalline silicon and thin-film without grounding and protection class II Battery Power Battery 3.8 / 5.7 / 7.6 / 9.6 / 11.5 Inverter Power Storage 4.0, 6.0, 8.0, 10,0 Household Household appliances Power Switch In the event of a mains failure, the system switches to island mode... -
Page 8: Scope Of Delivery
Manual 3.8 / 5.7 / 7.6 / 9.6 / 11.5 Scope of delivery Before shipment our products are checked for proper condition. Despite careful packaging, transport damage can occur, for which the transport company is generally responsible. If you notice any damage to the packaging or the PowerBattery, please immediately inform the transport company. -
Page 9: Power Battery Stack
Manual 3.8 / 5.7 / 7.6 / 9.6 / 11.5 1.7.2 Power Battery Stack Pos. desscription 1x Power Battery Stack 1x Patch cable RJ 45/Cat5e 15 cm Module description 1.8.1 Power Battery Master The DC cables to the power storage and to the lowest stack are already attached to the master at the factory. -
Page 10: Type Plate
Manual 3.8 / 5.7 / 7.6 / 9.6 / 11.5 1.8.2 type plates The type plates show the serial number (1) of the component, as well as information (2) on the voltages occurring in the component and the IP protection class. -
Page 11: Safety Instructions
Manual 3.8 / 5.7 / 7.6 / 9.6 / 11.5 Safety instructions Symbols Safety-relevant instructions are marked in this document with the following symbols and signal words: Danger to life or danger of serious bodily injury! Failure to comply may result in death or serious bodily injury •... -
Page 12: Basic Safety Instructions
Manual 3.8 / 5.7 / 7.6 / 9.6 / 11.5 Basic safety instructions A correctly mounted Power Battery 3.8 / 5.7 / 7.6 / 9.6 / 11.5 is intrinsically safe. Risk of injury from electric shock! Inside the components of the Power Battery there are elements under high voltage which can also generate high currents! In the event of a short circuit, very high currents can flow and cause burns. -
Page 13: Mechanichanical Assembly
Manual 3.8 / 5.7 / 7.6 / 9.6 / 11.5 Mechanichanical Assembly Preparing the installation site Risk of injury due to electric shock and heavy weight! Inside the components of the Power Battery there are elements under high voltage which can also generate high currents! Metal parts of the batteries are always live. - Page 14 Manual 3.8 / 5.7 / 7.6 / 9.6 / 11.5 Ensure that the mounting surface is made of flame-retardant material. Do not install the battery system in explosive areas and keep it away from flammable materials. Ensure that there are no corrosive gases at the installation site.
-
Page 15: Setting Up The Battery System
Manual 3.8 / 5.7 / 7.6 / 9.6 / 11.5 Setting up the battery system Overview 1 Power Battery Master 2 Power Battery Stack 3 Wheels of base plate 4 Base plate 5 pedestal adjustable The battery system is subsequently •... - Page 16 Manual 3.8 / 5.7 / 7.6 / 9.6 / 11.5 Set up stacks Place a power battery stack on the base plate with the enclosed mounting handles so that the connections face the wall. If the stack is set up correctly, it is automatically centred.
- Page 17 Manual 3.8 / 5.7 / 7.6 / 9.6 / 11.5 To fix the wall bracket, remove the two screws on the top stack (screw head preferably Torx T20). Mark the drill holes for the wall bracket Mount the wall bracket on the top Power Battery Stack with the two screws (1).
-
Page 18: Electrical Installation
Manual 3.8 / 5.7 / 7.6 / 9.6 / 11.5 Electrical Installation Earthing the components Risk of injury from electric shock Inside the compoents oft he Power Battery there are elements under high voltage which can also generate high currents! Grounding faults can lead to electric shock! •... -
Page 19: Establishing A Network Connection
Manual 3.8 / 5.7 / 7.6 / 9.6 / 11.5 Establishing a network connection In the adjacent drawing, the permanently attached DC cables have been omitted for the sake of clarity. Use the enclosed patch cables and the terminating resistor for communication between the individual stacks. -
Page 20: Establishing The Dc Connection
Manual 3.8 / 5.7 / 7.6 / 9.6 / 11.5 Establishing the DC connection The Power Battery Stacks are connected in series. The Power Battery Master is therefore connected to the top and bottom stack. Connect the DC cable (1) of the Power Battery Master to the connection socket (+) of the lowest stack. -
Page 21: Aligning The Power Battery And Attaching It To The Wall
Manual 3.8 / 5.7 / 7.6 / 9.6 / 11.5 Aligning the Power Battery and attaching it to the wall To avoid accidental tipping over, you should fix the Power Battery to the wall. Additional material required (not included): •... -
Page 22: Power Storage Dc 4.0 / 6.0
Manual 3.8 / 5.7 / 7.6 / 9.6 / 11.5 4.6.1 Power Storage DC 4.0 / 6.0 Guide the RJ45 cable through the cable entry and Plug the DC cable into the appropriate connectors. plug it into the interface X403 "CAN". -
Page 23: Operation
Switch off the power battery at the on/off switch, → chapter 1.8.1 "Power battery master", page 6. Consult the manufacturer's customer service. Periodic maintenance The Power Battery does not contain any serviceable parts. In case of malfunctions, please contact the RCT Power GmbH service department. -
Page 24: Storage, Cleaning And Disposal
Manual 3.8 / 5.7 / 7.6 / 9.6 / 11.5 Storage, cleaning and disposal Storage Store the Power Battery Stacks in a clean, dry, cool, frost-free room on non-flammable and non-conductive surfaces. Too high storage temperature leads to faster self-discharge and premature ageing. -
Page 25: Technical Data
Manual 3.8 / 5.7 / 7.6 / 9.6 / 11.5 Technical Data Power Battery 11.5 ELECTRICAL PARAMETER Nominal capacity 3,84kWh 5,76kWh 7,68kWh 9,60kWh 11,52kWh Usable capacity (90% DoD) 3,46kWh 5,18kWh 6,91kWh 8,64kWh 10,37kWh Cycle life (at 80% remaining capacity) 5000 Voltage range 120 V ... - Page 26 Manual 3.8 / 5.7 / 7.6 / 9.6 / 11.5 Block diagram Charging characteristics as function of ambient temperature...
- Page 27 RCT Power GmbH Line Eid Str. 1 78467 Constance, Germany Tel.: +49 (0)7531 996 77-0 Mail: info[at]rct-power.com 01/2022 Internet: www.rct-power.com RCT Power GmbH Line Eid Str. 1 78467 Konstanz, Deutschland Tel.: +49 (0)7531 996 77-0 Mail: info[at]rct-power.com...