Chapter 2 Switch Installation - Cisco ME 3400 Hardware Installation Manual
Cisco systems ethernet access switch installation guide
Hide thumbs
Also See for Cisco ME 3400:
- Software configuration manual (1138 pages) ,
- Command reference manual (950 pages) ,
- Getting started manual (33 pages)
Table of Contents
Preparing for Installation
Ethernet cables must be shielded when used in a central office environment. Statement 171
Warning
Warning Statement 345 applies only when you wall-mount the switch:
Note
Warning
Suitable for mounting on and over a concrete or other non-combustible surface only. Statement 345
Do not work on the system or connect or disconnect cables during periods of lightning activity.
Warning
Statement 1001
Read the installation instructions before connecting the system to the power source. Statement 1004
Warning
.
To prevent bodily injury when mounting or servicing this unit in a rack, you must take special
Warning
precautions to ensure that the system remains stable. The following guidelines are provided to
ensure your safety:
•
•
•
Warning
Class 1 laser product. Statement 1008
This unit is intended for installation in restricted access areas. A restricted access area can be
Warning
accessed only through the use of a special tool, lock and key, or other means of security.
Statement 1017
The plug-socket combination must be accessible at all times, because it serves as the main
Warning
disconnecting device. Statement 1019
Warning
This equipment must be grounded. Never defeat the ground conductor or operate the equipment in the
absence of a suitably installed ground conductor. Contact the appropriate electrical inspection
authority or an electrician if you are uncertain that suitable grounding is available. Statement 1024
Cisco ME 3400 Ethernet Access Switch Hardware Installation Guide
2-2
This unit should be mounted at the bottom of the rack if it is the only unit in the rack.
When mounting this unit in a partially filled rack, load the rack from the bottom to the top with the heaviest
component at the bottom of the rack.
If the rack is provided with stabilizing devices, install the stabilizers before mounting or servicing the unit in
Statement 1006
the rack.
Chapter 2
Switch Installation
OL-7677-04
Hide quick links:
Table of Contents
