Quick Links
Quick Installation Guide
Hitachi Ultrastar 15K147
Models:
H
U
S
1
5
1
4
1
4
V
L
H
U
S
1
5
1
4
1
4
V
L
H
U
S
1
5
1
4
7
3
V
L
H
U
S
1
5
1
4
7
3
V
L
H
U
S
1
5
1
4
3
6
V
L
H
U
S
1
5
1
4
3
6
V
L
P
HANDLING
RECAUTIONS
•
Do not open the electrostatic discharge (ESD) bag containing the drive until required.
•
Do not apply pressure on the drive during handling and installation.
•
To prevent damage from impact or vibration always set the drive down gently.
•
Handle the drive carefully by the edges. Do not touch the exposed printed circuit board or any electronic
components.
•
Do not cover the breather hole! Covering the breather hole may result in loss of data.
•
Save the packaging materials including the ESD bag in the event that the drive must be returned.
INSTALLING THE DRIVE
1. Record the serial number and part number of your hard drive for future reference.
2. Turn off the computer and remove the computer system cover.
3. Before handling the hard disk drive, discharge any static electricity from yourself and your clothing. With
one hand touch an unpainted metal surface on the computer chassis, and then touch the ESD bag with the
other hand for a minimum of two seconds.
4. Remove the hard drive from the ESD bag.
5. Unplug the computer.
6. For the 68-pin model assign a SCSI ID address if necessary. The default ID is 6.
Page 1
3
6
0
0
H
U
S
1
5
3
6
0
0
H
U
S
1
5
3
6
0
0
H
U
S
1
5
3
6
0
0
H
U
S
1
5
3
6
0
0
H
U
S
1
5
3
6
0
0
H
U
S
1
5
1
4
1
4
V
L
3
8
0
0
1
4
1
4
V
L
3
8
0
0
1
4
7
3
V
L
3
8
0
0
1
4
7
3
V
L
3
8
0
0
1
4
3
6
V
L
3
8
0
0
1
4
3
6
V
L
3
8
0
0
version 1.0
Related Manuals for Hitachi Ultrastar 15K147
Summary of Contents for Hitachi Ultrastar 15K147
- Page 1 Quick Installation Guide Hitachi Ultrastar 15K147 Models: HANDLING RECAUTIONS • Do not open the electrostatic discharge (ESD) bag containing the drive until required. • Do not apply pressure on the drive during handling and installation. • To prevent damage from impact or vibration always set the drive down gently.
- Page 2 ADDRESS JUMPER AND DRIVE OPTION BLOCKS (from left to right) OPTIONS UMPERS ARE NOT REQUIRED ON THE Page 2 Signal Signal Name Name +5V 150 LEDout +5V Pdy- Enable switch Term Power Force SE mode 80 P ONNECTOR version 1.0...
- Page 3 If your system does not boot up, turn off your computer and check all connections and settings. Turn on and boot the system. • If the system fails to boot, turn off your system. Contact the Hitachi GST Technical Support Center for assistance – www.hitachigst.com Page 3 The 80-pin drive is plugged version 1.0...
-
Page 4: Special Notes
Special Notes: • For this drive to operate in LVD mode all SCSI devices including the SCSI bus host adapter must be LVD devices. • The drive is designed to detect if the SCSI bus is LVD or SE. The drive will function based upon the mode that it detects. - Page 5 References in this publication to Hitachi Global Storage Technologies products, programs or services do not imply that Hitachi Global Storage Technologies intends to make these available in all countries in which Hitachi Global Storage Technologies operates.