Hitachi Global Storage Technologies
Quick Installation Guide
®
Hitachi Deskstar
7K500
Ultra ATA/133 Hard disk drive
Models: HDS725050KLAT80
System requirements for Ultra ATA/133
_______________________________________
If you do not have the components listed
below, your drive will function but at
speeds lower than 133 MB/s.
40-pin, 80-conductor cable
•
A controller card or motherboard chipset
•
with Ultra ATA/133 capability
Ultra ATA/133 compatible BIOS or driver
•
Handling precautions
_______________________________________
Set the drive down gently to prevent
•
damage from impact or vibration.
Do not open the ESD bag containing the
•
drive until needed.
Handle the drive carefully by the edges. Do
•
not touch the exposed printed circuit board
or any electronic components.
Do not press on the top or bottom of the
•
drive.
Do not cover the drive breather hole.
•
Before handling the drive, discharge any
•
static electricity from yourself and your
clothing. With one hand touch an unpainted
metal surface on your computer chassis,
then touch the ESD bag with the other hand.
Remain in contact with the chassis and the
bag for a minimum of two seconds.