BOOCAX Bubble Fish BF01 Product Manual

BOOCAX Bubble Fish BF01 Product Manual

Spray disinfection robot

Quick Links

Better Robot,Better Life
Bubble Fish BF01
Spray Disinfection Robot
Product Manual
V 1.0.1
BooCax Technology Co; Ltd
400 -161- 8661
Table of Contents
loading

Summary of Contents for BOOCAX Bubble Fish BF01

  • Page 1 Better Robot,Better Life Bubble Fish BF01 Spray Disinfection Robot Product Manual V 1.0.1 BooCax Technology Co; Ltd 400 -161- 8661...
  • Page 2 Do not clean or add water when the robot is powered on ; Do not disassemble the robot for repair or debugging; Do not replace any parts. If necessary, please do so under the direction of BooCax . 2 ) Safety instructions For Use When adding liquid, do not splash liquid into the robot ;...
  • Page 3 04/ After-sale Support If you have any questions about maintenance and safety during the use of BooCax atomization disinfection robot, you can contact us by phone / email as shown in this manual. We are very willing to provide you with product related services.
  • Page 4: Table Of Contents

    8. Set the scheduled startup time ......................22 9. Start disinfection ............................23 10. More function settings ........................24 Appendix 1:Robot firmware upgrade instructions............26 Attachment 2:Atomization Particle Size Test Report .............27 Appendix 3:Robot disinfection effect test report ............28 Attachment 4:Production Qualification ................29 3 / 32 BooCax boocax.com...
  • Page 5: Introduction To Bubble Fish

    "Bubble-Fish" is a small and flexible disinfection robot with an atomization volume of 2600ml/h. It is equipped with BooCax positioning and navigation system, and can move to the designated area by itself to effectively disinfect the ambient air. Sterilization and purification.
  • Page 6: Product Specification

    Power supply Support 110V ~ 240V Charging pile capability wide voltage input Rated output: voltage 29.4V, current 5.0A Safety protection Water shortage alarm Bumper strip 1 group Safety and Noise ≤50dB Environment Working temperature 0°~50° 5 / 32 BooCax boocax.com...
  • Page 7: Appearance Size

    BKS-ST-BF01_Product Manual v1.0.1 3. Appearance Size Atomization device 745mm Robot chassis 421mm Bottom 6 / 32 BooCax boocax.com...
  • Page 8: Function Module

    Driving wheel a floating ball to indicate Driven wheel the liquid level; - More than 12 liters turns Function description on the back of the fuselage into purple high liquid level alarm . BooCax 7 / 32 boocax.com...
  • Page 9: Preparation Before Use

    No duplicate QR code boards can appear in the same environment; • When mapping, the robot stops at the QR code board for 1-2 seconds to ensure that the QR code is saved( Voice prompt will be given for successful identification) 8 / 32 BooCax boocax.com...
  • Page 10: Clean Up Barriers

    15m m in height on the working path; The surmounting height of the robot is Make sure that there are no big slopes on the site, if so, please try to avoid : The maximum gradeability of the robot is 5° 9 / 32 BooCax boocax.com...
  • Page 11: Assembly And Use

     Robot cabin;  Robot Chassis;  Charging pile, power cord; Warranty card;  Quick Guide;  QR Code;  Spay Nozzle ;  Measuring cup ⑨ Drain pipe and sponge brush ⑩ Simple screwdriver ⑪ Battery 6.2. Assembly robot 6.2.1 Install the battery 10 / 32 BooCax boocax.com...
  • Page 12 BKS-ST-BF01_Product Manual v1.0.1 Tips: 1. This battery assembling only applies to the situation that the robot and its battery are shipped separately; 2. Without the manufacturer’s permission, please do not disassemble the battery privately . 11 / 32 BooCax boocax.com...
  • Page 13 6.2.3 Install spray nozzle and place charging pile 1 ) After installation, put the spray nozzle into the fog outlet to complete the assembly of the robot; 2 ) Place the charging pile against the wall and connect the power cord. 12 / 32 BooCax boocax.com...
  • Page 14: Download & Install App

    BKS-ST-BF01_Product Manual v1.0.1 6.3. Download & install app 13 / 32 BooCax boocax.com...
  • Page 15: Startup & Registration

    (3 )Turn on the Wifi of the Android device and connect the Wifi name of Bubble Fish. (4) As shown in the figure, click on Bubble Fish Wifi name BKS-BF01-XXXX, and prompt “ tap to share password’ robot 123, the connection is successful 14 / 32 BooCax boocax.com...
  • Page 16: Connect Robot

    3. After the configuration is successful, Bubble Fish will automatically turn off its own hot spot Wifi (BKS-BF01-XXXXX). If you need to search for the robot, you need to connect to the Wifi connected to Bubble Fish, and you can see it in “Local page” . 15 / 32 BooCax boocax.com...
  • Page 17: Build The Map

    If the scene is too large, you can use "increment" to repair and augment the map ; When passing the QR code, stay in front of it for more than 1 s, and there will be a corresponding voice prompt when the entry is successful. 16 / 32 BooCax boocax.com...
  • Page 18: Deploy Route

    "CHANGE" means to switch different position points, and "Connect" can connect two position points ; (3) Road planning supports editing functions to facilitate the adjustment of the robot's walking route at any time . 17 / 32 BooCax boocax.com...
  • Page 19: Fog Amount Setting

    When adjusting the fog volume, release the "Child Safety Lock"firstly , and then adjust the spray volume ( small,medium, large ) Description of lighting status: - Blue always on - working ( under disinfection ) - Blue breath -pause work 18 / 32 BooCax boocax.com...
  • Page 20: Add Liquid / Drain Liquid

    (for example: chlorine dioxide effervescent tablets, be sure to complete the proportioning in the measuring cup first, and then pour it into the cabin); (5) Please use purified water to dilute the medicinal solution. 19 / 32 BooCax boocax.com...
  • Page 21 (2) Remove a PE tube with a straight-through connector from the box as shown below; (3) Insert the front end of the straight connector of the tube and the tube operated in step 1 together with slight force; 20 / 32 BooCax boocax.com...
  • Page 22 (4) Open the APP, click "Home - Start the drainage", and be careful to prevent liquid from splashing onto the robot; (5) After draining, close the silicone plug and return the drain pipe to its original position. 21 / 32 BooCax boocax.com...
  • Page 23: Set The Scheduled Startup Time

    Then click the "+" button Click "Schedule" on the region are set, click "OK" to set the startup time and home page to enter the in the upper right corner disinfection area editing interface to save 22 / 32 BooCax boocax.com...
  • Page 24: Start Disinfection

    /all disinfection point is the same . In the following days, the robot will regularly start to perform disinfection work in each area according to the set time. You can also press the "Start / Pause" button "One-key disinfection" 23 / 32 BooCax boocax.com...
  • Page 25: More Function Settings

    It has functions such as voice prompts, volume adjustment, maintenance prompts, LAN connection settings, etc. Other functions such as disinfection log, line patrol mode selection, firmware upgrade, etc. are also on the "Settings" menu page, users can set and view by themselves : 24 / 32 BooCax boocax.com...
  • Page 26 The maximum capacity of the spray water tank is 12L. In order to avoid the overflow of disinfectant under working conditions such as up and down ramps, entry and exit grooves, thresholds, and emergency stops, it is recommended that the maximum amount of disinfectant put in should not exceed 10L. 25 / 32 BooCax boocax.com...
  • Page 27: Appendix 1: Robot Firmware Upgrade Instructions

    Open the App, go to Settings - Firmware Upgrade, click "Upgrade Firmware", and wait for about 5 minutes to complete the upgrade: Open the App, go to Settings - Firmware Click "Upgrade Firmware", the App will upload the downloaded upgrade file to the robot 26 / 32 BooCax boocax.com...
  • Page 28: Attachment 2:Atomization Particle Size Test Report

    BKS-ST-BF01_Product Manual v1.0.1 Appendix 2: Atomization Particle Size Test Report - Average Atomized Particles 4.23μm 27 / 32 BooCax boocax.com...
  • Page 29: Appendix 3: Robot Disinfection Effect Test Report

    BKS-ST-BF01_Product Manual v1.0.1 Appendix 3: Robot disinfection effect test report 28 / 32 BooCax boocax.com...
  • Page 30: Attachment 4:Production Qualification

    BKS-ST-BF01_Product Manual v1.0.1 Appendix 4: Production Qualification and National Disinfection Product Platform Filing Information 1. Production qualification: 2. National online filing information for disinfection products Query URL: https://credit.jdzx.net.cn/xdcp/ Search for "BooCax" 29 / 32 BooCax boocax.com...
  • Page 31 BKS-ST-BF01_Product Manual v1.0.1 30 / 32 BooCax boocax.com...
  • Page 32 BKS-ST-BF01_Product Manual v1.0.1 www.boocax.com Business Cooperation / After-sale Hotline:400-161-8661 31 / 32 BooCax boocax.com...

Table of Contents