Table of Contents
9.2
Warm-up and Rinsing
Upon start-up, the machine activates the warm-up
phase. Wait until it is completed.
The bars advance and
show that the machine is
warming up the system.
Once warm-up has been completed, the machine
performs a rinse cycle of the internal circuits.
The progress bar indicates
that
the
performing the rinse cycle
of the system.
A small amount of water is dispensed. Wait until the
cycle is completed.
machine
is
When the product selection screen appears, the
machine is ready to use.
If the machine is used for
the first time or after a
long period of inactivity,
contact
Provider to start it up.
9.3
Rinse/Self-Cleaning Cycle
The cycle permits the internal circuits to be rinsed
with fresh water. The cycle is carried out:
For the coffee circuit
• When the machine is started;
• During the Stand-by preparation phase if coffee was
dispensed when the power is turned on;
• After waking up from stand-by;
For the milk circuit (*only versions M2 and M1).
• When the machine is started if milk was dispensed
when it was turned on previously;
• When waking up after stand-by if at least one milk
product was dispensed before going into stand-by;
• After a specific period of time following the last milk
product;
A small amount of water will be dispensed to rinse and
heat all the machine parts.
English
the
Service
51
Hide quick links:
Table of Contents
