Table of Contents
EBS01041
5. Main switch
• Check the main switch for continuity.
Refer to "CHECKING THE SWITCHES".
• Is the main switch OK?
YES
EBS01042
6. Engine stop switches
• Check the engine stop switches for conti-
nuity.
Refer to "CHECKING THE SWITCHES".
• Are the engine stop switches OK?
YES
NO
Replace
the
main
switch.
NO
Replace the handle-
bar switch or engine
stop switch (frame).
IGNITION SYSTEM
EBS01040
7. Pickup coil resistance
• Disconnect the C.D.I. magneto coupler
from the wire harness.
• Connect the pocket tester (Ω × 100) to the
pickup coil terminal as shown.
Positive tester probe →
Negative tester probe →
• Measure the pickup coil resistance.
Pickup coil resistance
264 ~ 396 Ω at 20 °C (68 °F)
(between white/red and white/
blue)
• Is the pickup coil OK?
8 - 11
ELEC
white/red terminal 1
white/blue terminal 2
G/W
B/R
W/L W/R
2
1
YES
Replace the pickup
coil/stator assembly.
–
+
NO
Chapters
Table of Contents
Troubleshooting
