Gather Configuration Information - Cisco Universal Access Server AS5300 Quick Start Manual

3

Use this section to help gather and organize the information you need to run the setup script to configure your Cisco AS5300.

The information in the table is not an exhaustive list, but provided only as a starting point when using the setup script.

Note If you do not have this information, you can get it from your network administrator.

Item

Ask Your Network Administrator

What do you want to name the Cisco AS5300 (to

1.

distinguish it from other Cisco devices on your

network)?

What do you want the encrypted enable secret

2.

password to be? (Note:

seen when viewing the configuration and

therefore is more secure.)

What do you want the nonencrypted enable

3.

password to be? (

viewing the configuration and therefore is less

secure.)

4.

What do you want the password for remote console

access to be? This is referred to as the virtual

terminal password.

Do you want to configure the Cisco AS5300 for:

5.

SNMP? If so,

• What is the public (read-only) community

string?

• What is the private (read-write) community

string?

LAT?

AppleTalk?

• AppleTalk multizone networks?

• What are the AppleTalk zone names?

• What are the AppleTalk network numbers?

DECNet?

IP?

IGRP routing?

• What is the IGRP autonomous system number?

CLNS?

IPX?

• What are the IPX network numbers?

VINES?

XNS?

Apollo?

Bridging?

This password cannot be

This password can be seen when

Enter the Information in This Column

15