Note For Repair; Service Tools - Sony SEL1855 Service Manual

• Make sure that the flat cable and flexible board are not cracked or bent at the terminal.

Do not insert the cable insufficiently nor crookedly.

• When remove a connector, do not pull at wire of connector. It is possible that a wire is

snapped.

• When installing a connector, do not press down at wire of connector.

It is possible that a wire is snapped.

• Do not apply excessive load to the gilded flexible board.

UNIVERSAL WRENCH

In case of the following notches or holes are located in the lens block, etc during disassembling/

assembling the lens, use the universal wrench.

Notches

Holes

How to Use

Universal wrench

J-6082-609-A

Attach the chip-A or chip-B to the universal wrench.

For the notches: chip-A

For the holes: chip-B

Match the universal wrench to the holes or notches of the lens block, etc.

Match the universal wrench

to the width of holes or notches

Fixed screw

Chip

Chip

Fixed screw

B-40

A dhesive bond (B -40):

J-6082-614-A

LOCTITE 460

A dhesive bond (L OCT IT E 460)

or the equivalent

or the equivalent.

SEL1855 (E 18-55mm F3.5-5.6 OSS)

Cut and remove the part of gilt

which comes off at the point.

(Be careful that some

pieces of gilt may be left inside)

Chip-A for

Chip-B for

universal wrench:

universal wrench:

J-6082-609-1

J-6082-609-2

Chip-A

Universal wrench

Notches

Chip-B

Holes

Grease (FT-210):

9-913-200-37

FT-210

SG-310

Grease (SG-310):

9-913-200-36

2. DISASSEMBLY

Chip-A

Chip-B

2-1