Table of Contents
Quick Links
Table of Contents
Related Manuals for Bosch WAY24749II
Summary of Contents for Bosch WAY24749II
- Page 1 Washing machine WAY24749II en Instruction Manual and Installation Instructions...
- Page 2 Your new washing machine Display rules : Warning! You have chosen a Bosch washing machine. This combination of symbol and signal word indicates a possibly dangerous Please take a few minutes to read and situation. Not heeding the warning can become familiar with the advantages of cause death or injuries.
-
Page 3: Table Of Contents
Contents e n I n s t r u c t i o n M a n u a l a n d I n s t a l l a t i o n I n s t r u c t i o n s Intended use. - Page 4 Adding laundry ....45 Changing the programme ..45 Cancel the programme ..45 Programme end during rinse hold .
-
Page 5: Intended Use
Intended use Intended use This appliance is intended for private ■ I n t e n d e d u s e domestic use only. Do not install or operate this ■ appliance anywhere that is liable to experience frost and/or outdoor conditions. -
Page 6: Safety Instructions
Safety instructions Do not allow children to Safety instructions ■ clean or maintain this appliance unsupervised. T he following safety information Keep children under 3 years S a f e t y i n s t r u c t i o n s and warnings are provided to ■... -
Page 7: Installation
Safety instructions Warning Installation Risk of suffocation! Warning If allowed to play with the Risk of electric shock/fire/ packaging/plastic film or material damage/damage to packing components, children the appliance! may become caught in these or If the appliance is not installed pull them over their heads and properly, this may lead to a suffocate. - Page 8 Safety instructions The mains plug must be Warning ■ freely accessible at all times. Risk of fire/material damage/ If this is not possible, in damage to the appliance! order to comply with the The use of extension cords or relevant safety regulations, a power strips may result in fire switch (all pole due to overheating or short...
- Page 9 Safety instructions If the water hoses are altered Warning ■ or damaged, this may result Risk of injury! in material damage or The appliance is very heavy. ■ damage to the appliance. Lifting it may result in injury. The water hoses must not be Do not lift the appliance on kinked, crushed, altered or your own.
-
Page 10: Operation
Safety instructions If you reach into the drum Operation ■ while it is still rotating, you Warning risk injuring your hands. Risk of explosions/fire! Wait until the drum has Laundry that has been stopped rotating. pretreated with cleaning agents Warning that contain solvents, e.g. -
Page 11: Cleaning/Maintenance
Safety instructions Never take hold of the mains Caution! ■ plug with wet hands. Material damage/damage to When removing the mains the appliance ■ plug from the socket, always If the amount of laundry in ■ take hold of the plug itself the appliance exceeds its and never the mains cable, maximum load capacity, it... - Page 12 Safety instructions Warning Risk of injury/material damage/damage to the appliance! The use of spare parts and accessories supplied by other brands is dangerous and may result in injury, material damage or damage to the appliance. For safety reasons, use genuine spare parts and accessories only.
-
Page 13: Environmental Protection
Environmental protection This enables you to compare the Environmental consumption levels of the different programmes when choosing your protection programme settings and decide on an energy- and water-saving P ackaging/used appliance programme setting. E n v i r o n m e n t a l p r o t e c t i o n Dispose of packaging in an environmentally-responsible manner. -
Page 14: Positioning And Connecting
Positioning and connecting ( Mains cable Positioning and 0 Bag: connecting Installation and operating ■ instructions I ncluded with the appliance Customer services location ■ P o s i t i o n i n g a n d c o n n e c t i n g directory* Check the machine for transport Note:... -
Page 15: Safety Instructions
Positioning and connecting Safety instructions Installation surface The washing machine be stable Warning Note: so that it does not move around. Risk of injury! The installation surface must be firm The washing machine is very heavy. ■ ■ and level. Be careful when lifting/transporting Soft floors/floor coverings are not the washing machine. -
Page 16: Installing The Appliance In A Kitchenette
Positioning and connecting Installing the appliance in a Take the hoses out of the holders. kitchenette Warning Danger of death! There is a risk of electric shock if you touch live components. Do not remove the appliance covering plate. Unscrew and remove all four transportation securing bolts with a Notes wrench (WAF 13). -
Page 17: Hose And Cable Lengths
Positioning and connecting Hose and cable lengths Left-hand connection ■ Right-hand connection ■ The following are available from Tip: specialist dealers/customer services: Extension for Aqua-Stop and cold ■ water supply hose (approx. 2.50 m); order no. WM Z2380, WZ 10130, CZ 11350, Z 7070X0 A longer supply hose (approx. -
Page 18: Water Inlet
Positioning and connecting Water inlet When the tap is open, the water flow rate is at least 8 l/min. Warning If the water pressure is higher than this, Danger of death! a pressure-reducing valve must be There is a risk of electric shock if you installed. -
Page 19: Water Outlet
Positioning and connecting Water outlet Connection Drainage into a washbasin Warning ■ Risk of scalding! When you are washing at high temperatures, there is a risk of scalding if you come into contact with hot water (e.g. when draining hot water into a washbasin). -
Page 20: Levelling
Positioning and connecting Levelling Align the appliance using a spirit level. Incorrect alignment may result in loud noises, vibrations and machine "movement". Loosen the lock nuts using a WAF17 spanner, by turning it in a clockwise direction. Check the alignment of the washing machine with a spirit level, and adjust it if necessary. -
Page 21: Electrical Connection
Positioning and connecting Electrical connection The mains plug can be accessed at ■ all times. If this is not possible, in order to comply with the relevant Warning safety regulations, a switch (2-pole Danger of death! switch-off) must be built into the There is a risk of electric shock if you permanent installation in accordance touch live components. -
Page 22: Before Washing For The First Time
Positioning and connecting Before washing for the first time The washing machine was thoroughly tested before leaving the factory.To remove any water that may be left over from the test, run the first wash cycle without any laundry. Notes The washing machine must be ■... -
Page 23: Transportation
Positioning and connecting Transportation Before switching on the appliance again: E.g. when moving house Notes Preparatory work: The transport braces must be ■ Turn off the tap. removed. Reduce the water pressure in the Pour approx. 1 litre of water into ■... -
Page 24: Main Points In Brief
Main points in brief Main points in brief M a i n p o i n t s i n b r i e f Plug into the mains. Open the washing Sort the laundry. To switch on, press Turn on the tap. machine door. -
Page 25: Getting To Know The Appliance
Getting to know the appliance Getting to know the appliance W ashing machine G e t t i n g t o k n o w t h e a p p l i a n c e Detergent drawer ~ Page 42 Operating/display panel Door with door handle 9S Open the door... -
Page 26: Control Panel
Getting to know the appliance Control panel Buttons Child lock. 3 sec. Main switch (Sicurezza bambini 3 sec.) for for switching the washing activating/deactivating the machine on and off: childproof lock ~ Page 44 Press the # button. Buttons Basic Settings 3 Sec. Programme selector (Impostazione 3 sec.) for for selecting a programme. -
Page 27: Display Panel
Getting to know the appliance Display panel Main menu after selecting the programme e.g. Easy-Care (Sintetici) The arrows on the display panel indicate in which direction the programme default settings can be changed using the buttons located above and below. To change, select the button under the programme highlighted in black and change the programme. - Page 28 Getting to know the appliance Anti-Stain System (Sistema antimacchia x) button selected and select, for example, the grass· stain type: Using the two right-hand arrows, select the stain type. The selected stain type is active immediately and is displayed on the display panel.
-
Page 29: Laundry
Laundry Some examples of soiling levels can Laundry be found on ~ Page 30 – Light: Do not prewash, select the P repare the laundry TurboPerfect setting if L a u n d r y necessary Caution! – Normal Damage to the appliance/fabrics –... -
Page 30: Detergent
Detergent Saving energy and detergent Detergent For light and normal soiling, you can C orrect selection of detergent save energy (lower washing D e t e r g e n t temperature) and detergent. The care label is crucial for selecting the correct detergent, temperature and Saving Soiling/note... -
Page 31: Overview Of Programmes
Overview of programmes Overview of programmes P rogrammes on the programme selector O v e r v i e w o f p r o g r a m m e s Programme/Type of laundry/Instructions Settings Name of the programme Max. - Page 32 Overview of programmes Programme/Type of laundry/Instructions Settings Delicates / Silk (Delicati / Seta) Max. 2 kg Delicate, washable fabrics, e.g. made of silk, satin, synthetic fibres or Ž - 40 °C blends (e.g. silk blouses, silk scarves) 0 - 800** rpm For delicates or silk, use a detergent suitable for machine- Note: .
- Page 33 Overview of programmes Programme/Type of laundry/Instructions Settings Outdoor * Max. 2 kg Membrane-coated weatherproof or outdoor clothing and water-resistant Ž - 40 °C fabrics 0 - 800** rpm Notes ¦, (, x, Ï, Z, $, Á Use special detergent suitable for machine washing; add the ■...
- Page 34 Overview of programmes Programme/Type of laundry/Instructions Settings Towels * Max. 3.5 kg Hard-wearing, heat-resistant towels made of cotton; Ž - 90 °C especially soft towels 0 - 1600** rpm ¦, (, x, !, Ï, Z, p, %, $, Á Lingerie * Max.
- Page 35 Overview of programmes Programme/Type of laundry/Instructions Settings Spin (Centrifuga) * Extra spin with selectable speed 0 - 1600** rpm Drain (Scarico acqua) * For the rinsing water, e.g. after the $ setting (Rinse Hold = no final spin cycle) Outdoor / Impregnation * Max.
-
Page 36: Starching
Overview of programmes Programme/Type of laundry/Instructions Settings Automatic Soft * Max. 3.5 kg Gentler treatment of the laundry; 30 °C The degree of soiling and the type of fabric are automatically detected 1000** rpm and the washing sequence are adjusted accordingly. x, $, Á... -
Page 37: Programme Default Settings
Programme default settings Ready in Programme default (Fine fra) settings The programme duration is shown after selecting the programme. T he programme default settings are P r o g r a m m e d e f a u l t s e t t i n g s displayed in the main menu after Before starting the programme, you selecting the programme. -
Page 38: Additional Programme Settings/Options (* Depending On The Model)
Additional programme settings/options Prewash * Additional programme settings/options Settings that can be selected: (* depending on the on – off model) For heavily soiled laundry. T he settings/options that are available Pour detergent into Note: A d d i t i o n a l p r o g r a m m e s e t t i n g s / o p t i o n s depend on the model. -
Page 39: Easy-Iron
Additional programme settings/options Easy-Iron * Rinse Hold * Settings that can be selected: Settings that can be selected: on – off on – off Reduces creasing thanks to a special The washing remains in the water after spin sequence followed by fluffing and the last rinse cycle. -
Page 40: Anti-Stain System
Additional programme settings/options Anti-Stain System The treatment of two stains explained in the following example: (Sistema antimacchia x) Blood In total, there are 16 different types of Blood is first “dissolved” in cold water, stain to choose from. then the selected wash programme starts. -
Page 41: Operating The Appliance
Press the # button. The appliance is switched on. To do this, repeatedly press the corresponding button until the required The Bosch logo appears on the display setting is displayed. ~ Page 27 and all indicator lamps light up. The Cottons programme set at the... -
Page 42: Select Additional Programme
Individual laundry Additional programme settings/options items may cause an unbalanced ~ Page 38 load. ~ Page 48 Wait until the Bosch logo no longer ■ Placing laundry into the drum appears before adding laundry. The load screen appears when the ■... - Page 43 Operating the appliance Pour the detergent and care products Dosing into the appropriate compartments: Dose detergents and care products according to: the dosing recommendation on the ■ display panel, e.g. for Easy-Care. Depending on the amount of washing in the washing machine, a dosing recommendation is indicated on the display panel.
-
Page 44: Start The Programme
Operating the appliance For models without a measuring aid, Pre-washing, Washing, Rinsing, ■ pour the liquid detergent into the Spin, Drain ... are displayed during appropriate dispenser and place it in the wash cycle. the drum. Extra rinse: foam ■ Note: Foam detection If Foam has been detected also... -
Page 45: Adding Laundry
Operating the appliance If the appliance is switched off while Cancel the programme ■ the programme is running and childproof lock is activated, the For programmes at high temperatures: programme continues when the Press the A button. appliance is switched back on. To cool down laundry: Select Rinse / Freshen Up. -
Page 46: Removing Laundry/Switching Off The Appliance
Operating the appliance Removing laundry/switching off the appliance Open the loading door and remove the laundry. Follow the information on the display panel. Press the # button. The appliance is switched off. Turn off the tap. Not required for AquaStop Note: models. -
Page 47: Appliance Settings
Appliance settings Appliance settings S ettings that can be selected: A p p l i a n c e s e t t i n g s End signal ■ off – quiet – medium – loud – very loud Adjust the volume of the end signal. -
Page 48: Sensors
Sensors Dosing recommendation Sensors The dosing recommendation indicates a A utomatic load sensing recommended detergent dosage as a S e n s o r s percentage, depending on the selected Depending on the type of fabric and programme and the detected load. The load, the automatic load sensing indicated % refers to the dosing function optimally adjusts the water... -
Page 49: Cleaning And Maintenance
Cleaning and maintenance Machine housing/control Cleaning and panel maintenance Wipe the housing and the control ■ Warning panel with a soft, damp cloth. C l e a n i n g a n d m a i n t e n a n c e Remove the detergent residue Danger of death! ■... -
Page 50: Detergent Drawer And Housing
Cleaning and maintenance Detergent drawer and housing If the washing machine contains detergent or fabric softener residues: Pull out the detergent drawer. Press down the insert and fully remove the drawer. To remove the insert: Push the insert Take the drain hose out of the upwards from below with your finger. -
Page 51: The Drain Hose At The Siphon Is Blocked
Cleaning and maintenance To prevent unused detergent Note: Then clean the filter: from flowing straight into the drain Disconnect the hose from the tap. during the next wash: Pour 1 litre of Clean the filter with a small brush. water into compartment II and start the Drain programme. -
Page 52: Faults And What To Do About Them
Faults and what to do about them. Faults and what to do about them. E mergency release F a u l t s a n d w h a t t o d o a b o u t t h e m . E.g. -
Page 53: Information On The Display Panel
Faults and what to do about them. Information on the display panel Display Cause/remedy Pause: Reload is not Water level or temperature is too high. Press the A button to continue the possible programme. Door cannot be Water level or temperature is too high. Press the A button to continue the unlocked: Water level programme. -
Page 54: Faults And What To Do About Them
Faults and what to do about them. Faults and what to do about them. Faults Cause/remedy Water is leaking from the Attach the drain hose correctly or replace it. ■ appliance. Tighten the threaded joint on the inlet hose. ■ The appliance is not filling Have you pressed the A button? ■... - Page 55 Faults and what to do about them. Faults Cause/remedy Odours in the washing Run the Drum clean or Cottons 90 °C programme without laundry. machine. Add washing powder or a detergent containing bleach. Note: . To prevent foaming, only use half the amount of detergent recommended by the detergent manufacturer.
-
Page 56: After-Sales Service
After-sales service After-sales service I f you cannot rectify a fault yourself, A f t e r - s a l e s s e r v i c e contact customer services. ~ Cover page We will always find an appropriate solution in order to avoid unnecessary visits by engineers. -
Page 57: Consumption Rates
Consumption rates Consumption rates E nergy and water consumption, programme duration and C o n s u m p t i o n r a t e s residual moisture for the main washing programmes (approximate values) Programme Load Energy Water Programme consumption*... -
Page 58: Efficiency Test Programmes For Cotton Fabrics
Technical data Efficiency test programmes for cotton fabrics The following programmes (standard programmes, indicated by ü) are suitable for cleaning normally soiled cotton fabrics and are the most efficient with respect to combined energy and water consumption. Standard programmes for Cottons in accordance with the (EU) directive no. 1015/2010 Programme + temperature + button Load Approximate programme... -
Page 59: Aqua-Stop Warranty
Aqua-Stop warranty Aqua-Stop warranty O nly for appliances with Aqua-Stop A q u a - S t o p w a r r a n t y In addition to warranty claims against the vendor based on the purchase agreement and to our appliance warranty, we will provide compensation under the following conditions: If water damage is caused due to a... - Page 60 0344 892 8979 (Calls charged at local or mobile rate.) 01450 2655 (0.03 € per minute at peak. Off peak 0.0088 € per minute.) You can find the contact information for all countries in the attached after-sales service directory. Robert Bosch Hausgeräte GmbH Carl-Wery-Straße 34 81739 München, GERMANY *9001053206*...