Installing 3Rd Party Dmi Instrumentation; Installing The Agents; Requirements; Installation - HP Vectra E-Vectra Deployment Manual

Hardware management solution for hp devices version 5.5
Hide thumbs Also See for Vectra E-Vectra:
Table of Contents

5.5 Installing 3rd Party DMI Instrumentation

To implement third party DMI instrumentations for various components OEM'd by HP you will find the
software incorporated into the driver or you may download them from the one of the following websites:
http://www.hp.com/toptools, http://www.hp.com/go/vectrasupport,
Currently, HP has instrumentation packages for onboard 3Com NICs and HP 10/100 NICs for HP e-PCs,
HP Vectra and HP Kayak PCs as well as packages for a Visualize workstation NIC.

5.5.1 Installing the Agents

The DMI instrumentation for 3COM network interface cards will be installed on top of the 3COM NIC
driver and the HP Toptools agent. If that driver is not installed the DMI installation will fail.

5.5.2 Requirements

3COM Network Interface Card
Windows 95 or NT 4.0
HP Toptools for Desktops Agent 4.0 or higher.
Logon ID with administrator privileges

5.5.3 Installation

Run setup95.exe or setupnt.exe
Reboot your machine
Verify the installation
1. Open the Task Manager
2. Check to see that LAN_AC32.exe is in the processes list.

5.6 Installing HP Toptools for Jornada PC Companions

- Note -
Stop monitoring services such as virus scanning during the installation process.
Do not use accented characters, symbols, or spaces in any fields, or for any directory names,
during HP Toptools installation.
HP Toptools for Jornada PC Companion's agents are installed on a HP Kayak or Vectra PC or a HP
Omnibook that has the HP Toptools for Desktops or Notebooks agent already installed. This install
will add a screen to the local Toptools application for PC Companions. This information will also be
available from the HP Toptools Device Manager.
- Note -
The Jornada PC Companion agents are installed on the Jornada's host, not on the Jornada itself. The
Jornada does not need to be connected during the installation, but must be docked and resynchronized at
the end of the procedure.
HP Toptools Deployment Guide Version 5.5
HP Toptools
http://www.hp.com/go/kayaksupport
53

Hide quick links:

Table of Contents
loading

Table of Contents