Contents Chapter 1: Before you begin ......................4 Chapter 2: OptiPlex Small Form Factor Cable Cover..............5 Chapter 3: OptiPlex Small Form Factor Dust Filter ............... 9 Chapter 4: After you install......................12 Chapter 5: Getting help....................... 13 Contacting Dell................................... 13...
Before you begin Steps 1. Save and close all open files and exit all open applications. 2. Shut down your computer: Click Start > Power > Shut down. NOTE: If you are using a Linux operating system, see the documentation of your operating system for shut-down instructions.
OptiPlex Small Form Factor Cable Cover The cable cover for the OptiPlex Small Form Factor protects the ports and organizes the cables that are connected to the computer. Steps 1. Follow the instructions in Before you begin. 2. Route the cables through the slot on the cable cover.
Page 6
4. Align the cable cover retaining hooks with the slots on the chassis. CAUTION: Be careful not to bend or break the delicate plastic hooks. OptiPlex Small Form Factor Cable Cover...
Page 7
5. Gently push the cable cover until the cable cover clicks into place. 6. Slide the latch to lock the cable cover to the chassis. OptiPlex Small Form Factor Cable Cover...
Page 8
NOTE: For added security, use the Kensington cable lock to secure the computer. OptiPlex Small Form Factor Cable Cover...
OptiPlex Small Form Factor Dust Filter The dust filter for the OptiPlex Small Form Factor helps protect the computer from fine dust particles. After installation, you can set a pre-boot reminder in the BIOS to clean or replace the dust filter at customized time interval using the interval setting in the BIOS.
Page 10
3. Gently push the lower edge of the dust filter to close it over the computer. 4. Gently push the edges of the dust filter to click the dust filter into place. OptiPlex Small Form Factor Dust Filter...
Page 11
Alerts are generated only during a system reboot and not during normal operating system operation. NOTE: To clean the dust filter, brush or gently vacuum and then wipe down the external surfaces with a moist cloth. OptiPlex Small Form Factor Dust Filter...
After you install Steps 1. Connect any external devices, peripherals, or cables you removed before working on your computer. 2. Connect your computer and all attached devices to their electrical outlets. 3. Turn on your computer. After you install...
About this task Dell provides several online and telephone-based support and service options. Availability varies by country and product, and some services may not be available in your area. To contact Dell for sales, technical support, or customer service issues: Steps 1.