Helpful Hints - HP Compaq dc7100 DT Getting Started Manual

Business desktops
Hide thumbs Also See for Compaq dc7100 DT:
Table of Contents
Getting Started

Helpful Hints

If you encounter problems with the computer, monitor, or
software, see the following list of general suggestions before
taking further action:
Check that the computer and monitor are plugged into a
working electrical outlet.
Check to see that the voltage select switch (some models) is
set to the appropriate voltage for your region (115V or 230V).
Check to see that the computer is turned on and the green
power light is on.
Check to see that the monitor is turned on and the green
monitor light is on.
Check the power LED on the front of the computer to see if it
is flashing red. The flashing lights are error codes that will
help you diagnose the problem. Refer to
Diagnostic Lights and Audible Codes" on page 33
guide for details.
Turn up the brightness and contrast controls of the monitor if
the monitor is dim.
Press and hold any key. If the system beeps, then the
keyboard should be operating correctly.
Check all cable connections for loose connections or
incorrect connections.
Wake the computer by pressing any key on the keyboard or
pressing the power button. If the system remains in suspend
mode, shut down the computer by pressing and holding the
power button for at least four seconds then press the power
button again to restart the computer. If the system will not
shut down, unplug the power cord, wait a few seconds, then
22
www.hp.com
"Interpreting
in this
Getting Started

Hide quick links:

Table of Contents
loading

This manual is also suitable for:

Compaq dc7100 mtCompaq dc7100 sffCompaq dc7100

Table of Contents