Table of Contents
Quick Links
Troubleshooting
My Philips Avent Baby monitor exceeds the
standard charging time
Is the parent unit of your Philips Avent Baby monitor taking more time to fully charge than the
indicated charging time? Find out what is causing this so you can try and solve this issue
yourself.
The parent unit is turned on
If the parent unit of your Philips Avent Baby monitor is turned on while charging, the charging
time will take longer than indicated. Turn off the parent unit during charging to reduce the
charging time.
Charging it for the first time
If you charge the parent unit for the first time, it will take longer to fully charge the parent unit of
your Philips Avent Baby monitor. This is also the case if you have not used your Philips Avent
Baby monitor for a while. After fully charging it for the first time it should meet the standard
charging time again.
Does the issue still persists? Please contact us for further assistance.
The information on this page applies to the following models: SCD730/86 , SCD720/86 ,
SCD630/37 , SCD501/10 , SCD560/10 , SCD570/10 , SCD603/10 , SCD600/10 , SCD535/00 ,
SCD525/00 , SCD510/00 , SCD530/00 , SCD520/00 , SCD589/54 , SCD590/54 .
My Philips Avent Baby monitor has a bad
connection
Use these possible causes and solutions if the parent unit of your Philips Avent Baby monitor
keeps losing connection or the sound gets interrupted.
Units are out of range
The baby unit and the parent unit of your Philips Avent Baby monitor might be out of operating
range. Obstructions, such as walls and trees, can limit the range of your Philips Avent Baby
Table of Contents
Related Manuals for Philips AVENT SCD630/37
Summary of Contents for Philips AVENT SCD630/37
- Page 1 My Philips Avent Baby monitor exceeds the standard charging time Is the parent unit of your Philips Avent Baby monitor taking more time to fully charge than the indicated charging time? Find out what is causing this so you can try and solve this issue yourself.
- Page 2 Note: If the signal is lost, the parent unit will beep three times every 20 seconds. Units are too close to each other Make sure that the baby unit and parent unit of your Philips Avent Baby monitor are at least 1.5 meters / 5 feet away from each other to prevent interference.
- Page 3 My Philips Avent Baby monitor does not charge It can happen that the parent unit or baby unit of your Philips Avent Baby monitor is not charging. Use these possible causes and solutions to try and fix this yourself. The power adapter is not connected Make sure that baby unit or parent unit of your Philips Avent Baby monitor is connected with the power adapter.
- Page 4 Protective foil is not removed from the lens Check to see if the protective foil is removed from the camera lens of the baby unit. The lens of the baby unit is dirty Fingerprints or dirt on the camera lens of the baby unit can affect the video quality. Clean the camera lens of the baby unit with a dry cloth.
- Page 5 The camera of my Philips Avent Baby monitor is not working It can happen that video images are not displaying on your Philips Avent Baby monitor. This does not always mean that the camera is broken. Use these possible causes and solutions to try and solve the issue yourself.
- Page 6 The information on this page applies to the following models: SCD630/37 . My Philips Avent Baby monitor beeps It can happen that the parent unit of your Philips Avent Baby monitor beeps. Find out how to solve this issue yourself.
- Page 7 If the connection between the units is lost, the link light turns red. The parent unit beeps three times every 20 seconds and the out-of-range image appears on the display. Try a different location or decrease the distance between the baby unit and parent unit. It can take up to 10 seconds before the connection between the units is reestablished.
- Page 8 Maximum or minimum temperature is reached Note: This situation is only applicable for the SCD630 model of the Philips Avent Baby monitor. The parent unit will beep twice every 20 seconds when the baby unit reaches the chosen maximum or minimum temperature. The parent unit shows a temperature whit this is exceeded.
- Page 9 Find out more about the differences in battery light colors. Differences between battery light colors When the parent unit of your Philips Avent Video baby monitor is connected to the wall socket, the battery light will turn: ...
-
Page 10: Know These Safety Symbols
Please check the power cord periodically to prevent potential damages, such as worn or cut cord. For assistance, visit our website www.philips.com/ support or contact the Philips Consumer Care Center in your country.You nd its contact details in the worldwide guarantee lea et. -
Page 11: Adult Supervision
- Do not put the baby unit and the parent unit close to a heating source. Ordering accessories To buy accessories or spare parts, visit www.shop.philips.com/service or go to your Philips dealer. You can also contact the Philips Consumer Care Center in your country (see the worldwide guarantee leaflet for contact details). Compliance information This device complies with Part 15 of the FCC Rules and Industry Canada License-exempt RSS standard. -
Page 12: Precauciones De Almacenamiento
Philips. También puede ponerse en contacto con el Servicio de Atención al Cliente de Philips en su país (consulte los datos de contacto en el folleto de la garantía mundial). Información sobre cumplimiento de normas Este dispositivo cumple con la Parte 15 de las reglas de la FCC y con los estándares RSS exentos de licencia del Ministerio de Industria de... -
Page 13: Conformité Aux Normes
Vous en trouverez les coordonnées dans le dépliant de garantie internationale. Champs électromagnétiques (CEM) - Cet Philips appareil est conforme à toutes les normes et à tous les règlements applicables relatifs à l'exposition aux champs électromagnétiques. - Cette appareil répond aux règles de sécurité établies sur la base des connaissances scientifiques actuelles s’il est manipulé... -
Page 14: Informações De Segurança Importantes
Para obter assistência, visite o nosso Web site em www.philips.com/support ou contacte o Centro de Apoio ao Cliente da Philips no seu país. Pode encontrar os detalhes de contacto no folheto da garantia mundial. - Page 15 Assistência Para obter assistência, visite o nosso Web site em www.philips.com/avent ou contacte o Centro de Apoio ao Cliente da Philips no seu país. Pode encontrar os detalhes de contacto no folheto de garantia mundial. Campos electromagnéticos (CEM) - Este aparelho Philips cumpre todas as normas e regulamentos aplicáveis relativos à...