Related Manuals for Hitachi 65HK5300
Summary of Contents for Hitachi 65HK5300
- Page 1 Some features or functions mentioned in this user manual may vary or may not be available depending on the model you purchased.
-
Page 2: Table Of Contents
Audio File Formats ..........33 Contents Subtitle File Formats..........33 Safety Information ........... 2 Supported DVI Resolutions ........34 Markings on the Product.......... 2 Connectivity ............35 Environmental Information........3 Wired Connectivity..........35 Features ..............4 Wireless Connectivity ..........35 Ultra HD (UHD) ............ -
Page 3: Safety Information
• Do not place any heat sources such as electric Safety Information heaters, radiators, etc. near the TV set. • Do not place the TV on the floor or inclined surfaces. CAUTION • To avoid danger of suffocation, keep plastic bags out of the reach of babies, children and domestic RISK OF ELECTRIC SHOCK animals. -
Page 4: Environmental Information
WARNING coaxial cable, may in some circumstances create a fire hazard. Connection to a television distribution system • Do not ingest the battery, Chemical Burn Hazard. has therefore to be provided through a device providing • This product or the accessories supplied with the electrical isolation below a certain frequency range product may contain a coin/button cell battery. -
Page 5: Features
dark shadows and sunlight with full clarity, colour Features and detail. HDR/HLG content is supported via native • Remote controlled colour TV and market applications, HDMI, USB inputs and over • Fully integrated digital terrestrial/cable/satellite TV DVB-S broadcasts. Set the related HDMI source (DVB-T-T2/C/S-S2) input as Enhanced from the Sources option in the Settings>System menu or from the Sources>Source... -
Page 6: Tv Control & Operation
OK to switch the TV into standby mode immediately. Changing Channels and Volume If you highlight No and press OK, the TV will remain You can change the channel and adjust the volume on. You can also choose to cancel the Auto Power by using the Programme +/- and Volume +/- buttons Down function from this dialogue. -
Page 7: Tv Control Button & Operation
consecutively to move the focus to Volume + or TV Control Button & Operation Volume - option. Press and hold the button for about 2 seconds to activate the selected option. The icon colour of the option changes when activated. Then press the button to increase or decrease the volume. -
Page 8: Using Main Tv Menu
+ or Programme - option. Press and hold the button small icons indicate the current status for time, network for about 2 seconds to activate the selected option. and sync for apps. If these icons appear in green, it The icon colour of the option changes when activated. means that the time information is updated, network Then press the button to switch to the next or previous is connected and sync is successfully completed. -
Page 9: Inserting The Batteries Into The Remote
confirmation message will be displayed. Highlight Yes 5. Sources and press OK to proceed. The timer will be cancelled. You can manage your input source preferences using It is not possible to set timers for two or more events the options of this menu. To change the current source that will broadcasted at the same time interval. -
Page 10: Antenna Connection
Antenna Connection Connect the aerial or cable TV plug to the aerial input (ANT) socket located on the left side of the TV or satellite plug to the satellite input (LNB) socket located For DTS patents, see http://patents.dts.com. on the rear side of the TV. Manufactured under licence from DTS Licensing Rear side of the TV Limited. -
Page 11: Disposal Information
Disposal Information [European Union] These symbols indicate that the electrical and electronic equipment and the battery with this symbol should not be disposed of as general household waste at its end-of-life. Instead, the products should be handed over to the applicable collection points for the recycling of electrical and electronic equipment as well as batteries for proper treatment, recovery and recycling in accordance with your national legislation... -
Page 12: Remote Control
Remote Control Standby: Switches On / Off the TV Numeric buttons: Switches the channel, enters a number or a letter in the text box on the screen Language: Switches among sound modes (an- alogue TV), displays and changes audio/subtitle language and turns subtitles on or off (digital TV, where available) Mute: Completely turns off the volume of the TV Volume +/-... -
Page 13: Connections
Connections When using the wall mounting Connector Type Cables Device kit (available from a third party in the market, if not supplied), HDMI we recommend that you plug all Connection your cables into the back of the (side&back) TV before mounting on the wall. Insert or remove the CI module SPDIF SPDIF... -
Page 14: Switching On/Off
• Press the control button on the TV. Switching On/Off To Switch the TV Off To Switch the TV On • Press the Standby button on the remote control. Connect the power cord to a power source such as a wall socket (220-240V AC, 50 Hz). - Page 15 confirmation dialogue will be displayed. Select Yes and such as Frequency, Network ID and Search Step on press OK to proceed. You can change your selection the next screen. If you select No and press OK or the later using the Mode option in the Settings>Picture network search dialogue is not displayed you can set menu.
-
Page 16: Using Satellite Channel Table Feature
Press OK to proceed. Fransat Installation will be list according to your preferences using the Edit tab performed and broadcasts will be stored (if available). options or press the Home button to quit and watch TV. If you set the Install Type as Standard, you can While the search continues a dialogue may appear, continue with regular satellite installation and watch asking whether you want to sort channels according... -
Page 17: Usb Recording
so may cause physical damage to the USB player Timeshift Recording and the USB device itself. Do not pull out your drive Press Pause button while watching a broadcast to while playing a file. activate timeshifting mode. In timeshifting mode, the You can use USB hubs with your TV’s USB input(s). -
Page 18: Media Browser
have enough free space otherwise instant recording Info button if the information bar has disappeared, may not be possible. highlight the gear wheel symbol positioned on the right side of the information bar and press OK. Picture Auto discard: You can set the Discard type as None, Settings, Sound Settings, Media Browser Settings Oldest, Longest or Shortest. -
Page 19: Followme Tv
When eARC is enabled from the sound menu, TV FollowMe TV first tries to establish eARC link. If eARC is supported With your mobile device you can stream the current by the connected device, the output turns into eARC broadcast from your smart TV using the FollowMe mode and the “eARC”... -
Page 20: E-Manual
change this setting from the Sources>Source Settings menu or from the Settings>System>Sources menu. E-Manual You can find instructions for your TV’s features in the E-Manual. To access the E-Manual, enter Settings menu, select Manuals and press OK. For quick access press Home button and then Info button. -
Page 21: Settings Menu Content
Settings Menu Content Picture Menu Content You can change the picture mode to suit your preference or requirements. Picture mode can be set to one of these options: Cinema, Game, Sports, Dynamic and Natural. Note: Available options may differ depending on the input source. Mode Dolby Vision Modes: If Dolby Vision content is detected Dolby Vision Dark and Dolby Vision Bright picture mode options will be available instead of Cinema and... - Page 22 Opens colour tuner settings. Set the Colour Tuner as Enabled to adjust the Hue, Colour Tuner Colour and Brightness values manually. You can use this option to set the range of colours displayed on your TV screen. When set as On, colours are set according to the source signal. When set as Off, the TV’s Gamut Mapping maximum colour capacity is used by default (recommended option).
- Page 23 Digital Out Sets digital out audio type. Sets headphone volume. This option will not be available if the Sound Output option is set as Lineout. Headphone Please ensure before using headphones that the headphone volume is set to a low level, to prevent damage to your hearing.
- Page 24 Equalizer Selects the equalizer mode. Custom settings can be made only when in User mode. Bass Gain Controls the bass gain level. Use Left or Right button to set. Dynamic Range Control provides gain adjustment of the source to maintain suitable DTS DRC audible range at both low and high playback levels.
- Page 25 Installation Menu Content Displays automatic tuning options. D. Aerial: Searches and stores aerial DVB stations. Automatic channel D. Cable: Searches and stores cable DVB stations. Analogue: Searches and stores scan (Retune) analogue stations. Satellite: Searches and stores satellite stations. Manual channel This feature can be used for direct broadcast entry. scan Searches for the linked channels in the broadcast system.
- Page 26 System Menu Content Displays accessibility options of the TV. Some options will not be available if no channels Accessibility are installed. Increase the contrast of the menu options and texts to make them easier to read. White High Contrast Text, Yellow Text and Off options will be available. Hard of Hearing Enables any special feature sent from the broadcaster.
- Page 27 Enter correct PIN to change parental settings. You can easily adjust Menu Lock, Maturity Lock, Child Lock or Guidance in this menu. You can also set a new PIN or change the Default CICAM PIN using the related options. Parental Note: Some menu options may not be available depending on the country selection in the First Time Installation.
- Page 28 Alexa Sets the language preference for Alexa. Language Alexa On Enables or disables Alexa On Standby Mode feature. If enabled Alexa will be available while the TV is in standby mode. Standby Mode Note: This feature may affect your TV’s power consumption. Alexa Home Set as Off to disable this feature or choose one of the inactivity periods to enable.
- Page 29 Select this mode for store display purposes. Whilst Store Mode is enabled, some items in the TV menu may not be available. For some models Enabled with video option Store Mode may also be available. If this option is set, the TV will switch to store mode and the pre-installed video file will be played back.
-
Page 30: General Tv Operation
Maturity Lock: If this option is set, the TV gets the General TV Operation maturity information from the broadcast and if this Using the Channel List maturity level is disabled, prohibits access to the broadcast. The TV sorts all stored stations in the channel list. You can edit this channel list, set favourites or set active Note: If the country option in the First Time Installation is stations to be listed by using the Channels menu... -
Page 31: Teletext Services
Press Back/Return button to use available tab options. Notes: You cannot switch to any other channel while there is an active recording or timer on the current channel. Highlight Filter tab and press OK to see the filtering options. To change the layout highlight Now/Next and It is not possible to set timer or record timer for two or more press OK. -
Page 32: Troubleshooting & Tips
the storage device is correctly formatted and there is Troubleshooting & Tips sufficient space. TV will not turn on USB is too slow Make sure the power cord is plugged in securely to a If a “USB disk writing speed too slow to record” wall outlet. -
Page 33: Hdmi Signal Compatibility
HDMI Signal Compatibility Source Supported Signals Available 480i 60Hz 480p 60Hz 576i, 576p 50Hz 720p 50Hz,60Hz 1080i 50Hz,60Hz 24Hz, 25Hz, 1080p 30Hz, 50Hz, HDMI 60Hz 24Hz, 25Hz, 3840x2160p 30Hz, 50Hz, 60Hz 24Hz, 25Hz, 4096x2160p 30Hz, 50Hz, 60Hz (X: Not Available, O: Available) In some cases a signal on the TV may not be displayed properly. -
Page 34: Supported File Formats For Usb Mode
Supported File Formats for USB Mode Video File Formats Format File Extension Video Codec Audio .mpg/.mpeg/.dat/ .vob MPEG1/2, H.264, VC1 MPEG Layer 1/2/3, AC3 .ts/.trp/.m2ts MPEG1/2, H.264, VC1, HEVC/H.265 MPEG Layer 1/2/3, AC3, E-AC3 .avi MPEG1/2, MPEG4, H.264, MJPEG MPEG Layer 1/2/3, AC3, AAC, WMA .mp4/.m4a/.m4v/ .mov/. -
Page 35: Supported Dvi Resolutions
Supported DVI Resolutions When connecting devices to your TV’s connectors by using DVI converter cable (DVI to HDMI cable - not supplied), you can refer to the following resolution information. 56Hz 60Hz 66Hz 70Hz 72Hz 75Hz 640x480 800x600 1024x768 1280x768 1280x960 1360x768 1366x768 1280x1024 1400x1050 1600x900 1920x1080 English - 34 -... -
Page 36: Connectivity
Internet Speed Test Connectivity Highlight Internet Speed Test and press the OK Wired Connectivity button. TV will check the internet connection bandwidth To Connect to a Wired Network and display the result when complete. • You must have a modem/router connected to an Advanced Settings active broadband connection. -
Page 37: Networked Standby Mode
other WLAN 11b appliances. The standard values of router option and press OK. Go to your modem/router the transmission speed are the theoretical maximum device and press the WPS button on it to make the values for the wireless standards. They are not the connection. You will see a connection confirmation on actual speeds of data transmission. -
Page 38: Wireless Display
program executed on a remote device connected to • Start device discovery on the TV the same local area network, such as a smartphone. Note: Refer to the user manual of the Bluetooth device to learn how to set the device to pairing mode. To enable this feature set the Networked Standby Mode option in the Network menu as On. -
Page 39: Connectivity Troubleshooting
sizes smaller than 5 MB and in the following file formats It is also possible that the connection may not be are suitable; .jpg, .jpeg, .png, bmp. If a file sent by the available due to a firewall problem. If you think this mobile device does not suit these requirements, it will causes your problem, contact your internet service not be displayed on the TV. -
Page 40: Apps
automatically according to the site you are visiting. Apps Highlight OK and press the OK button to add. You can access the applications installed on your TV You can also use the Vewd menu options to manage from the Home menu. Press the Home button on the the browser. -
Page 41: Smart Center
green, yellow, blue, may be defined for some other IMPORTANT: Make sure the TV and mobile device functions, e.g. shortcuts). are connected to the same network. If you switch to another channel while an HbbTV For media sharing feature Audio Video Sharing option application is active (either in red button icon mode should be enabled (if available). -
Page 42: Alexa Ready
Edit custom channel list: You can edit your custom Smart Remote Feature channel list using this setting. You can use your mobile device as a remote control Choose channel list source: You can choose the for your TV once it has connected to the TV. To access channel list source to be used in the application. - Page 43 • Use the Alexa Built-in option in the Settings>Sys- you will be informed about the feature. Highlight Start tem>Voice Assistant menu and press OK to proceed. • An authentication code will be created and displayed • Carry out first time installation on your TV. The setup on the screen.
-
Page 44: Google Assistant
Assistant menu. The wizard will guide you through Command Function the setup process. Alexa, unmute ‘FN’ Unmutes sound • On the first screen highlight Start and press OK The TV switches to the to proceed Alexa, change the input to input source with the spec- “input_name”... -
Page 45: Google Assistant
Google Assistant Command Function Your TV works with Ok Google for voice control of your volume up on ‘FN’ Increases volume connected devices and appliances. volume down on ‘FN’ Decreases volume Works With Ok Google set mute volume on ‘FN’ Mutes sound By means of this feature you can control the functions switch input to “input_... -
Page 46: Wired Network Connection
Advanced Settings Wired Network Connection Highlight Advanced Settings and press the OK • You must have a modem/router connected to an button. On the next screen you can change the IP and active broadband connection. DNS settings of the TV. Highlight the desired one and • Connect your TV to your modem/router via an press Left or Right button to change the setting from Ethernet cable. There is a LAN port at the rear...