Related Manuals for Vanco Evolution EVEX2330
Summary of Contents for Vanco Evolution EVEX2330
- Page 1 HDBASET™ BOOST E X TE N DER (330 ft./ 100m) over single Cat5e/Cat6 or HDMI Cable Vanco Part Number EVEX2330 HDBaseT™ Boost Extender (330ft/100m) www.vanco1.com • 800.626.6445...
- Page 2 DEAR CUSTOMER Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully before connecting, operating or adjusting this product. Please keep this manual for future reference. This product is 100% inspected and tested in the United States to verify HDMI performance parameters.
- Page 3 FEATURES INTRODUCTION The Evolution by Vanco EVEX2330 HDMI Extender over Single Cat5e/6 with HDBaseT Technology, Bi-directional IR, and Boost extends high definition video and audio signals, IR, and power at a distance of up to 330ft/100m over a single Cat5e/6 cable. 4K2K (2160p) resolution can be extended up to 262ft/80m over a single Cat5e/6 cable.
- Page 4 HDBaseT Boost Extender 330ft/100m Part # EVEX2330 • Features HDBaseT Technology, optimized for whole-home or commercial distribution of uncompressed high-definition signals at twice the distance of HDMI cables without degradation • HDBaseT Extender can connect uncompressed full HD digital video, audio, 100BaseT Ethernet, and various control signals through a single 330ft/100m Cat5e/Cat6 cable •...
-
Page 5: Specifications
SPECIFICATIONS TECHNICAL SPECS HDMI Compliance ............HDMI Deep Color, Full 3D 4K2K @ 30 HDCP Compliance ............Yes Video Bandwidth ............Single link 340 MHz (10.2 Gbps) Video Support ............480i/480p/720p/1080i/1080p @60/2160p@30 HDMI over UTP ............1080p@60 100m (330ft) Cat5e Audio Support ............ -
Page 6: Package Contents
PACKAGE CONTENTS • EVEX2330 (TX and RX) • IR Blaster (TX) • IR Receiver (RX) • (2) DC 5V in line power supply • Rack-mounting ear set • Product Manual PANEL DESCRIPTIONS Transmitting Unit Receiving Unit 18 19 20 1. 5 V DC 11. -
Page 7: Connection Diagram
CONNECTION DIAGRAM CONNECT AND OPERATE 1. Connect a source such as a Blu-Ray Player, game console, A/V Receiver, Cable or Satellite Receiver, etc. to the HDMI input on the Transmitting unit. 2. Connect a display such as an HDTV or HD Projector to the HDMI output on the Receiving unit. -
Page 8: Ir Pass-Through
IR PASS-THROUGH IR Blaster TX IR Receiver RX IR BLASTER (TX) To control the source: Plug IR Blaster into IR TX port of transmitter unit (EVEX2330-TX); place blaster in front of the IR eye of the source. To control the display: Plug IR Blaster into IR TX port of receiver unit (EVEX2330-RX); place blaster in front of the IR eye of the display. - Page 9 NOTICE 1. Vanco HDMI and Cat5e/6 cables are strongly recommended for use with this product to ensure best results. 2. Incorrect placement of IR Blaster and Receiver may result in the failure of the IR extenders. Please check carefully before plugging in the IR extender to the respective IR sockets.
-
Page 10: Troubleshooting
HDMI cable into it’s output, then power up the Vanco unit and plug the HDMI cable into it’s input, finally turn on the display and plug the HDMI cable from the receiver into it. This activates all of the devices in corresponding order and results in a signal being plugged into a device that is on and will attempt to connect the signal. -
Page 11: Limited Warranty
Vanco’s opinion, prove defective within this warranty period, Vanco, at its option, will repair or replace this product without charge. Any defective parts replaced become the property of Vanco. This warranty does not apply to those products which have been damaged due to accident, unauthorized alterations, improper repair, modifications, inadequate maintenance and care, or use in any manner for which the product was not originally intended. - Page 12 ® Vanco International 506 Kingsland Drive Batavia, Illinois 60510 call: 800.626.6445 fax: 630.879.9189 visit: www.vanco1.com...