Table of Contents
Quick Links
Table of Contents
Related Manuals for Bosch WAW28750GB/12
Summary of Contents for Bosch WAW28750GB/12
- Page 1 Washing machine WAW28750GB en Instruction Manual and Installation Instructions...
- Page 2 Your new washing machine Display rules : Warning! You have chosen a Bosch washing machine. This combination of symbol and signal word indicates a possibly dangerous Please take a few minutes to read and situation. Not heeding the warning can become familiar with the advantages of cause death or injuries.
-
Page 3: Table Of Contents
Contents e n I n s t r u c t i o n M a n u a l a n d I n s t a l l a t i o n I n s t r u c t i o n s Intended use. - Page 4 Operating the appliance..38 Faults and what to do about them..48 Preparing the washing machine . . . 38 Emergency release....48 Switching on the appliance/ selecting a programme .
-
Page 5: Intended Use
Intended use Intended use This appliance is intended for private ■ I n t e n d e d u s e domestic use only. Do not install or operate this ■ appliance anywhere that is liable to experience frost and/or outdoor conditions. -
Page 6: Safety Instructions
Safety instructions Do not allow children to Safety instructions ■ clean or maintain this appliance unsupervised. The following safety information Keep children under 3 years S a f e t y i n s t r u c t i o n s and warnings are provided to ■... -
Page 7: Installation
Safety instructions Warning Installation Risk of suffocation! Warning If allowed to play with the Risk of electric shock/fire/ packaging/plastic film or material damage/damage to packing components, children the appliance! may become caught in these or If the appliance is not installed pull them over their heads and properly, this may lead to a suffocate. - Page 8 Safety instructions If you take hold of any of the Warning ■ appliance's protruding parts Risk of electric shock/fire/ (e.g. the appliance door) in material damage/damage to order to lift or move it, these the appliance! parts may break off and If the appliance's mains cable is cause injury.
- Page 9 Safety instructions The appliance is secured for Caution! ■ transportation by transport Material damage/damage to locking devices. If the the appliance transport locking devices are If the water pressure is too ■ not removed before the high or too low, the appliance is operated, this appliance may not be able to may result in damage to the...
-
Page 10: Operation
Safety instructions If you reach into the drum Operation ■ while it is still rotating, you Warning risk injuring your hands. Risk of explosions/fire! Wait until the drum has Laundry that has been stopped rotating. pretreated with cleaning agents Warning that contain solvents, e.g. -
Page 11: Cleaning/Maintenance
Safety instructions Warning Cleaning/Maintenance Eye/skin irritation! Warning Detergent and care products Danger of death! may spray out if the detergent The appliance is powered by drawer is opened while the electricity. There is a risk of appliance is in operation. electric shock if you come into Rinse eyes/skin thoroughly if contact with live components. - Page 12 Safety instructions Warning Caution! Risk of poisoning! Material damage/damage to the appliance Poisonous fumes may be given off by cleaning agents that Cleaning agents and agents for contain solvents, e.g. cleaning pretreating laundry (e.g. stain solvent. removers, prewash sprays, etc.) Do not use cleaning agents that may cause damage if they contain solvents.
-
Page 13: Environmental Protection
Environmental protection Information on energy and water ■ Environmental consumption: ~ Page 26 The displays provide information protection about the relative level of energy and water consumption in the selected Packaging/used appliance programmes. E n v i r o n m e n t a l p r o t e c t i o n The more indicator lights light up, Dispose of packaging in an the higher the programme's... -
Page 14: Positioning And Connecting
Positioning and connecting ( Mains cable Positioning and 0 Bag: connecting Installation and operating ■ instructions Included with the appliance Customer services location ■ P o s i t i o n i n g a n d c o n n e c t i n g directory* Check the machine for transport Note:... -
Page 15: Safety Instructions
Positioning and connecting Safety instructions Installation surface The washing machine be stable Warning Note: so that it does not move around. Risk of injury! The installation surface must be firm The washing machine is very heavy. ■ ■ and level. Be careful when lifting/transporting Soft floors/floor coverings are not the washing machine. -
Page 16: Installing The Appliance In A Kitchenette
Positioning and connecting Installing the appliance in a Take the hoses out of the holders. kitchenette Warning Danger of death! There is a risk of electric shock if you touch live components. Do not remove the appliance covering plate. Unscrew and remove all four transportation securing bolts with a Notes wrench (WAF 13). -
Page 17: Hose And Cable Lengths
Positioning and connecting Hose and cable lengths Left-hand connection ■ Right-hand connection ■ The following are available from Tip: specialist dealers/customer services: Extension for Aqua-Stop and cold ■ water supply hose (approx. 2.50 m); order no. WM Z2380, WZ 10130, CZ 11350, Z 7070X0 A longer supply hose ■... -
Page 18: Water Inlet
Positioning and connecting Water inlet Optimum water pressure in the supply network Warning At least 100 kPa (1 bar) Danger of death! Maximum 1000 kPa (10 bar) There is a risk of electric shock if you When the tap is open, the water flow touch live components. -
Page 19: Water Outlet
Positioning and connecting Water outlet Connection Drainage into a washbasin Warning ■ Risk of scalding! When you are washing at high temperatures, there is a risk of scalding if you come into contact with hot water (e.g. when draining hot water into a washbasin). -
Page 20: Levelling
Positioning and connecting Levelling Observe the following information and ensure that: Align the appliance using a spirit level. Notes Incorrect alignment may result in loud The mains voltage and voltage ■ noises, vibrations and machine indicated on the washing machine "movement". -
Page 21: Before Using The Appliance For The First Time
Positioning and connecting Before using the appliance for the first time The washing machine was thoroughly tested before leaving the factory.To remove any water that may be left over from the test, run the first wash cycle without any laundry. Notes The washing machine must be ■... -
Page 22: Transportation
Positioning and connecting Transportation Before switching on the appliance again: E.g. when moving house Notes Preparatory work: The transport braces must be ■ Turn off the tap. removed. Reduce the water pressure in the Pour approx. 1 litre of water into ■... -
Page 23: Main Points In Brief
Main points in brief Main points in brief M a i n p o i n t s i n b r i e f Connect the mains Open the door. To switch on, press Select a plug. Turn on the the # button. -
Page 24: Getting To Know The Appliance
Getting to know the appliance Getting to know the appliance Washing machine G e t t i n g t o k n o w t h e a p p l i a n c e Detergent drawer ~ Page 39 Operating/display panel Door with door handle 9S Open the door... -
Page 25: Control Panel
Getting to know the appliance Control panel All the buttons are sensitive Note: H Changing the default programme (except for the main switch) and only settings: ~ Page 36 need to be pressed lightly. Temperature , ■ Spin speed (Spin), ■... -
Page 26: Display Panel
Getting to know the appliance Display panel Default programme settings: ( Temperature in °C Ž - 90 (Ž = cold) Spin speed in rpm, ■ $, 0 - 1600*; * Max. spin speed, depending on the selected programme and model, 0 = no spin cycle, draining only ■... - Page 27 Getting to know the appliance Further information Further information Automatic switch-off of the appliance: Active Oxygen Ø ~ Page 37 Ø On OFF ~ Page 13, ~ Page 43 Programme progress: Active oxygen phase Ø Prewash Wash Rinse õ Spin - 0 - Programme end Programme end during Rinse...
-
Page 28: Laundry
Laundry Some examples of soiling levels can Laundry be found on ~ Page 29 – Light: Do not prewash, select the P repare the laundry SpeedPerfect setting if L a u n d r y necessary Caution! – Normal Damage to the appliance/fabrics –... -
Page 29: Detergent
Detergent Saving energy and detergent Detergent For light and normal soiling, you can C orrect selection of detergent save energy (lower washing D e t e r g e n t temperature) and detergent. The care label is crucial for selecting the correct detergent, temperature and Saving Soiling/note... -
Page 30: Overview Of Programmes
Overview of programmes Overview of programmes Programmes on the programme selector O v e r v i e w o f p r o g r a m m e s Programme/type of laundry/information Settings Programme name Max. load Brief explanation of the programme and the fabrics for which it is Temperature that can be selected suitable. - Page 31 Overview of programmes Programme/type of laundry/information Settings Easy-Care Max. 4 kg Items made of synthetic or blended fabrics Ž ... 60 °C $, 0 - 1200 rpm EcoPerfect, SpeedPerfect, Prewash, Aqua Plus, Reduced Ironing, Active Oxygen Ø **** Max. 4 kg Mixed Load Mixed load of cottons and synthetic fabrics Ž...
- Page 32 Overview of programmes Programme/type of laundry/information Settings Rinse / Spin / Drain Combined extra programme for rinsing and spinning the laundry, and draining the rinsing water $, 0 - 1600** rpm The Aqua Plus button is activated at the factory for this Note: .
- Page 33 Overview of programmes Programme/type of laundry/information Settings SuperQuick 15’ Max. 2 kg Extra-short programme of approx. 15 minutes, suitable for small Ž - 40 °C items of lightly soiled laundry $, 0 - 1200 rpm *** Jeans / Dark wash Max.
- Page 34 Overview of programmes Programme/type of laundry/information Settings *** Night Wash Max. 4 kg Particularly quiet programme for washing overnight; suitable for Ž - 40 °C items made from cotton, linen, synthetic or blended fabrics $, 0 - 1200 rpm Notes EcoPerfect, SpeedPerfect, End signal deactivated, ■...
-
Page 35: Activeoxygen Refresh Ø
Overview of programmes ActiveOxygen Refresh Ø Starching ActiveOxygen Refresh Ø is an Laundry should not be treated Note: innovative programme that is designed with fabric softener. to refresh laundry and remove odours (e.g. the smell of cigarettes and kitchen Liquid starch can be used to stiffen odours). -
Page 36: Programme Default Settings
Programme default settings The maximum speed that can be set Programme default depends on the model and programme that has been selected. settings Finished In The default programme settings are P r o g r a m m e d e f a u l t s e t t i n g s displayed in the display panel after Before starting the programme, you selecting the programme. -
Page 37: Additional Programme
Additional programme settings Reduced Ironing Additional programme Reduces creasing thanks to a special settings spin sequence followed by fluffing and reduced spin speed. An overview of all additional settings, A d d i t i o n a l p r o g r a m m e s e t t i n g s which can be selected depending on The washing's residual moisture Note:... -
Page 38: Operating The Appliance
Operating the appliance The maximum load and the duration ■ Operating the of the programme (alternately) Information on water and energy appliance ■ consumption Preparing the washing In appliances with a drum light: O p e r a t i n g t h e a p p l i a n c e machine The drum is lit after switching on the appliance, after opening and closing the... -
Page 39: Measure And Add Detergent And Care Products
Operating the appliance Measure and add detergent and care products Caution! Damage to the appliance Cleaning agents and agents for pre- treating laundry (e.g. stain removers, prewash sprays, etc.) may cause Measuring aid A For liquid detergent damage if they come into contact with Compartment II Detergent for the main the surfaces of the washing machine. -
Page 40: Change The Programme Default Settings
Operating the appliance Change the programme Start the programme default settings Press the A button. The indicator lamp lights up and the programme starts. You can use or change the default settings for this washing cycle. The display panel shows the "Ready in" time while the programme is running or To do this, repeatedly press the the programme length and the... -
Page 41: Child Lock 3 Sec
Operating the appliance Child Lock 3 sec. Notes Do not leave the door open for too ■ You can lock the washing machine to long when adding laundry as water prevent the functions you have set from from the laundry may leak out. being changed inadvertently. -
Page 42: Cancel The Programme
Operating the appliance Cancel the programme Removing laundry/switching off the appliance For programmes at high temperatures: Press the A button. Open the door and remove the To cool down laundry: Select Rinse. laundry. Press the A button. Press the # button. The appliance is switched off. -
Page 43: Appliance Settings
Appliance settings You can now change the settings: Appliance settings Changing the signal volume You can change the following settings: A p p l i a n c e s e t t i n g s The volume of the buttons and the Use the Finished In + or - button to ■... -
Page 44: Sensors
Sensors Sensors Cleaning and maintenance A utomatic load sensing S e n s o r s Warning Depending on the type of fabric and C l e a n i n g a n d m a i n t e n a n c e Danger of death! load, the automatic load sensing There is a risk of electric shock if you... -
Page 45: Machine Housing/Control Panel
Cleaning and maintenance Machine housing/control Detergent drawer and housing panel If the washing machine contains detergent or fabric softener residues: Wipe the housing and the control ■ Pull out the detergent drawer. Press panel with a soft, damp cloth. down the insert and fully remove the Remove the detergent residue ■... -
Page 46: The Drain Pump Is Blocked, Emergency Draining
Cleaning and maintenance The drain pump is blocked, emergency draining Warning Risk of scalding! When you wash at high temperatures, the water gets very hot. If you come into contact with the hot water, you may be Place the service flap back on, lock it into place, and close it. -
Page 47: Filter In The Water Supply Blocked
Cleaning and maintenance Filter in the water supply blocked First, reduce the water pressure in the supply hose: Turn off the tap. Select any programme (except Rinse/Spin/Empty). Press the A button. Allow the programme to run for approximately 40 seconds. Press the # button. -
Page 48: Faults And What To Do About Them
Faults and what to do about them. Caution! Faults and what to do Water damage about them. Any escaping water may cause water damage. Emergency release Do not open the washing machine door F a u l t s a n d w h a t t o d o a b o u t t h e m . if water can be seen through the glass. -
Page 49: Information On The Display Panel
Faults and what to do about them. Information on the display panel Indicator/symbol Cause/remedy - P - and ÿ The door is unlocked. It is possible to add laundry. - P - The temperature is too high. Wait until the temperature drops. ■... -
Page 50: Faults And What To Do About Them
Faults and what to do about them. Faults and what to do about them. Faults Cause/remedy Water is leaking from the Attach the drain hose correctly or replace it. ■ machine. Tighten the threaded joint on the supply hose. ■ The appliance is not filling Have you pressed the A button? ■... - Page 51 Faults and what to do about them. Faults Cause/remedy Water remaining in the Not a fault – the effectiveness of the care product is not affected. ■ care product Clean the insert if necessary. ■ compartment i . Odours in the washing Run the Drum Clean or Cottons 90 °C programme without laundry.
-
Page 52: After-Sales Service
After-sales service Faults Cause/remedy - P - and ÿ appear on the The door is unlocked. It is possible to add laundry. display panel when the cycle is paused. If you cannot rectify a fault yourself (after switching the machine off and then on again) or a repair is required: Switch off the appliance and pull the mains plug out of the socket. -
Page 53: Consumption Rates
Consumption rates Consumption rates Energy and water consumption, programme duration and C o n s u m p t i o n r a t e s residual moisture for the main washing programmes (approximate values) Programme Load Energy Water Programme consumption* consumption*... -
Page 54: Efficiency Test Programmes For Cotton Fabrics
Technical data Efficiency test programmes for cotton fabrics The following programmes (standard programmes, indicated by ü) are suitable for cleaning normally soiled cotton fabrics and are the most efficient with respect to combined energy and water consumption. Standard programmes for cottons in accordance with Regulation (EU) no. 1015/2010 Programme + temperature Load Approximate programme... -
Page 55: Aqua-Stop Warranty
Aqua-Stop warranty Aqua-Stop warranty Only for appliances with Aqua-Stop A q u a - S t o p w a r r a n t y In addition to warranty claims against the vendor based on the purchase agreement and to our appliance warranty, we will provide compensation under the following conditions: If water damage is caused due to a... - Page 56 0344 892 8979 (Calls charged at local or mobile rate.) 01450 2655 (0.03 € per minute at peak. Off peak 0.0088 € per minute.) You can find the contact information for all countries in the attached after-sales service directory. Robert Bosch Hausgeräte GmbH Carl-Wery-Straße 34 81739 München, GERMANY *9001149294*...