Mounting On A Wall - LG E2051S Owner's Manual

Hide thumbs Also See for E2051S:

Table of Contents

ASSEMBLING AND PREPARING

WARNING

When you adjust the angle, do not hold the

bottom of the Monitor frame as shown on

the following illustration, as it may injure your

fingers.

Do not touch or press the screen when

adjusting the angle of the monitor.

NOTE

Tilt from +15 to -5 degrees up or down to adjust

the angle of the Monitor to suit your view.

- 5

Front

Using the Kensington security system

The Kensington security system connector is

located at the back of the Monitor. For more

information of installation and using, refer to the

Rear

manual supplied with the Kensington security

system or visit http://www.kensington.com .

Connect the Kensington security system cable

between the Monitor and a table.

NOTE

The Kensington security system is optional.

You can obtain it from most electronics stores.

Mounting on a wall

For proper ventilation, allow a clearance of 10 cm

on each side and from the wall. Detailed

instructions are available from your dealer, see the

optional Tilt Wall Mounting Bracket Installation and

Setup Guide.

10 cm