Connecting With The Pc - LG E2281VR Owner's Manual

Connecting the Display

1.

Before setting up the monitor, ensure that the power to the monitor, the computer

system, and other attached devices is turned off.

2.

Connect signal input cable

of the signal cable.

A

Connect DVI-D(Digital signal) Cable

B

Connect D-sub(Analog signal) Cable

NOTE

This is a simplified representation of the rear view.

This rear view represents a general model; your display may differ from the view as shown.

Varies according to model.

Wall-outlet type

1

and power cord

Connect the signal

input cable and

tighten it up by

turning in the

direction of the

arrow as shown in

the figure.

2

in order, then tighten the screw

When using a D-Sub signal input cable

connector for Macintosh

Mac adapter : For Apple Macintosh use,

a separate plug adapter is needed to

change the 15 pin high density (3 row) D-

sub VGA connector on the supplied cable

to a 15 pin 2 row connector.

6

E2281TR

DVI-D (This feature is not

available in all countries.)