Power Connector Panel; Figure 4-14. Power Connector Panel Removal (Nonredundant Systems) - Dell PowerEdge 4200 Service Manual
Dell poweredge 4200 servers: service manual
Hide thumbs
Also See for PowerEdge 4200:
- Installation and troubleshooting manual (154 pages) ,
- User manual (132 pages) ,
- Solution manual (114 pages)
Table of Contents
P
ower Connector Panel
power
connector
panel
cables (5)
Figure 4-14. Power Connector Panel Removal (Nonredundant
Systems)
1. Disconnect the power supply from the power connector panel by sliding
the power supply toward the back of the computer approximately
1 inch.
2. Disconnect all power connector panel cables (from the system board,
the SCSI backplane board, and so forth).
3. Unscrew the retainer screw.
4. Disengage the panel from the four hooks holding it to the computer
chassis, and then lift the panel away from the computer.
power supply
retainer
screw
power
connector
panel
hook slots (4)
Removing and Replacing Parts
4-15
- Quick Links:
- Technical Specifications
Hide quick links:
Table of Contents
