Disassembly Procedure - Mitsubishi Electric Mr Slim PUHZ-RP50VHA4 Service Manual
Split-type, heat pump air conditioners
Hide thumbs
Also See for Mr Slim PUHZ-RP50VHA4:
- Service manual (144 pages) ,
- Technical data book (108 pages) ,
- Service manual (85 pages)
Table of Contents
15
DISASSEMBLY PROCEDURE
PUHZ-RP35VHA4
OPERATING PROCEDURE
1. Removing the top panel, service panel, front panel and
back panel
(1) Remove the top panel fixing screws (1 for right, 2 for left,
4 × 10), and detach the top panel.
(2) Remove the service panel fixing screw (1 for right, 4 × 10)
and detach the service panel by pulling it downward. (See
Photo 2)
(3) Remove the front panel fixing screws (5 for front, 2 for
right, 2 for left, 4 × 10), and detach the front panel.
(4) Remove the back panel fixing screws (4 for right, 3 for
rear, 4 × 10), and detach the back panel.
2. Removing the fan motor
(1) Remove the top panel. (See Photo 1)
(2) Remove the front panel. (See Photo 1)
(3) Remove the propeller fixing nut (1 for front, M6, left-screw),
and detach the propeller.
(4) Disconnect the connector CNF1 on the controller circuit
board in the electrical parts box.
(5) Loosen the clamp for the lead wire in the motor support.
(6) Remove the fan motor fixing screws (4 for front, 4 × 18),
and detach the fan motor. (See Photo 4)
OCH451D
PUHZ-RP50VHA4
Photo 1
Photo 2
Photo 3
Photo 4
Fan motor
(MF1)
131
PHOTOS
Grille
Front panel
Propeller
Nut
Fan motor fixing screws
Fan motor fixing screws
Top panel
Top panel
fixing screws
Back panel
Service panel
for charge
plug
Service panel
Service panel
fixing screw
Pull down
4 hooks
Electrical parts box
Clamp
Motor support
- Quick Links:
- Table of Contents
- Technical Change
- Specifications
- Data
- Troubleshooting
Hide quick links:
Chapters
Table of Contents
