Procedure Overview
Many mobile station tests performed by the Test Set require that a call be
connected. To set up a call, the Test Set must be configured to include:
The steps beginning on page 42 describe how to make a mobile station originated
call (by dialing numbers on the mobile station). The mobile station registers as the
call is being connected, but there are other circumstances that can cause mobile
station registration. They are:
•
•
Regardless of which event causes the mobile station to register, the field labeled
MS Database
field updated, you have the option of making a base station originated call by
pressing the CALL key on the Test Set's front panel.
The mobile station's CDMA RF Channel
The mobile station's Protocol
The mobile station's RF Channel Standard
The mobile station's system identification (unless mobile station roams).
Power-up registration (usually initiated when mobile station is turned on)
and
Zone-based registration (initiated by selecting the field labeled Register)
displays the mobile station's identification. As soon as you see this
Chapter 2, Set Up a Call
Procedure Overview
51