Honeywell TH6320WF01 User Manual page 32

Wi-fi programmable thermostat
Table of Contents
Connecting to your Wi-Fi network
3 Make sure your thermostat is connected.
While the connection is in process, your thermostat
will flash Wait for up to 3 minutes. When the
connection is complete, the display will show Wi-Fi
Setup Connection Success. The Wi-Fi signal strength will
appear in the top-right corner.
After about 60 seconds, the home screen will appear
and Register at Total Connect will flash until registration
is complete.
If you don't see these messages, see page 26.
To register online for remote access to your thermostat
continue on page 31.
If the thermostat displays Connection Failure or continues to display
Note:
Wi-Fi Setup, confirm you correctly entered your home network password in
step 2. If correct, refer to the FAQ at wifithermostat.com/support
69-2718EF—01
30
M33875
M33876
Table of Contents
loading

This manual is also suitable for:

Rth6500wf wi-fi seriesTh6320wf

Table of Contents