Bosch WAT28661IN/51 Instruction Manual And Installation Instructions

Bosch WAT28661IN/51 Instruction Manual And Installation Instructions

Table of Contents

Quick Links

Washing machine
WAT ...
Instruction Manual and Installation Instructions
en
Table of Contents
loading

Summary of Contents for Bosch WAT28661IN/51

  • Page 1 Washing machine WAT ... Instruction Manual and Installation Instructions...
  • Page 2 Your new washing machine Display rules : Warning! You have chosen a Bosch washing machine. This combination of symbol and signal word indicates a possibly dangerous Please take a few minutes to read and situation. Not heeding the warning can become familiar with the advantages of cause death or injuries.
  • Page 3: Table Of Contents

    Contents e n I n s t r u c t i o n M a n u a l a n d I n s t a l l a t i o n I n s t r u c t i o n s Switching on the appliance/selecting a Intended use.
  • Page 4: Intended Use

    Intended use The drain pump is blocked, emergency Intended use draining ..... . 27 The drain hose at the siphon is blocked For private domestic use only.
  • Page 5: Safety Instructions

    Safety instructions Reaching into the drum while Safety instructions ■ it is still turning may cause hand injuries. E lectrical safety Do not reach into the drum S a f e t y i n s t r u c t i o n s when it is turning.
  • Page 6: Environmental Protection

    Environmental protection – Destroy the lock on the Environmental washing machine door. protection Warning P ackaging/used appliance Risk of suffocation! E n v i r o n m e n t a l p r o t e c t i o n Children may become wrapped Dispose of packaging in an in packaging/film or packing...
  • Page 7 Environmental protection The displays provide information Automatic switch off (only before ■ about the relative level of energy and the programme starts or after the water consumption in the selected programme ends) If the appliance is programmes. not operated for a prolonged period, The more display segments are it automatically switches off to save visible, the higher the respective...
  • Page 8: Familiarising Yourself With Your

    Familiarising yourself with your appliance Familiarising yourself with your appliance Washing machine F a m i l i a r i s i n g y o u r s e l f w i t h y o u r a p p l i a n c e Service flap Detergent drawer ~ Page 17 Controls...
  • Page 9: Controls

    Familiarising yourself with your appliance Controls 8 Touch display ( Main switch This shows you the programme You can use the # button to information and selection options switch the appliance on and off. for settings, and you can select 0 Programme selector the settings by touching the You can turn the programme...
  • Page 10 Familiarising yourself with your appliance Display and control panels Display for ad- Setting justment values i-Dos i L, K, J, off Dosage quantity for fabric softener Speed SpeedPerfect EcoPerfect +1, +2, +3 , off Water&Rinse+; + additional rinse cycles ë Easy-Iron Prewash Rinse Stop = no final spin...
  • Page 11: Laundry

    Laundry Some examples of soiling levels can Laundry be found on ~ Page 13. – Light: Do not prewash, select the P repare the laundry Speed setting if necessary L a u n d r y – Normal Caution! – Heavy: Load less laundry, select Damage to the appliance/fabrics a program with prewash –...
  • Page 12: Dyeing/Bleaching

    Detergent Dyeing/bleaching Detergent Dye should only be used in normal C orrect selection of detergent household quantities. Salt may damage D e t e r g e n t stainless steel. Always follow the dye The care label is crucial for selecting manufacturer's instructions.
  • Page 13: Saving Energy And Detergent

    Programme default settings Saving energy and detergent Programme default For light and normal soiling, you can settings save energy (lower washing temperature) and detergent. T he programme default settings are P r o g r a m m e d e f a u l t s e t t i n g s displayed and can be changed in the Saving Soiling/note...
  • Page 14: I-Dos Settings

    Programme default settings increments of 30 minutes and up to a i-DOS w for detergent maximum of 24 h (h=hour). Adjustment values for the dosage After the programme starts, the quantity selected time, e.g. 8.5 h is displayed Light: and counted down until the washing For lightly soiled laundry programme starts.
  • Page 15: Memory Programme

    Additional programme settings Memory programme Additional programme settings â You can save a selected programme with your favourite settings here. You can find an overview of all of the A d d i t i o n a l p r o g r a m m e s e t t i n g s additional settings that can be selected To store: depending on the programme on the...
  • Page 16: Water&Rinse

    Operating the appliance Water&Rinse+ Operating the appliance ë Adjustment values: P reparing the washing + 1 rinse O p e r a t i n g t h e a p p l i a n c e machine + 2 rinses + 3 rinses The washing machine must be Note:...
  • Page 17: Change The Programme Default Settings

    Operating the appliance In appliances with a drum light: Placing laundry into the drum The drum is lit after switching on the Warning appliance, after opening and closing the Danger of death! door and after starting a programme. Items of laundry pretreated with The light switches off automatically.
  • Page 18: Start The Programme

    Operating the appliance For programmes without intelligent being changed inadvertently in the dosing, or as required (in which case, control panel. set intelligent dosing to "off"), detergent To activate/deactivate the childproof can be added manually to the left-hand lock, touch and hold the control panel compartment.
  • Page 19: Changing The Programme

    Operating the appliance For safety reasons, the door remains Removing laundry/switching ■ locked when the water level or off the appliance temperature is high, or while the drum is turning, and it is not possible Open the loading door and remove to add laundry during this time.
  • Page 20: Intelligent Dosing System

    Intelligent dosing system Do not mix different liquid ■ Intelligent dosing detergents. If changing your liquid detergent (type, manufacturer, etc.), system empty the dispenser completely and clean it. ~ Page 25 I ntelligent dosing system in Do not use products containing I n t e l l i g e n t d o s i n g s y s t e m ■...
  • Page 21: Everyday Use

    Intelligent dosing system Everyday use again, even if the washing machine is switched off. Displays: Topping up the detergent/ fabric softener: If the display for the selected intelligent dosing flashes, this means that the amount of detergent or fabric softener in the dispenser is below the minimum fill level.
  • Page 22: Manual Dosage

    Intelligent dosing system Touch N or M to set the required Degree of soil- base dosing quantity. The setting is ing → activated without needing to be Water hard- confirmed. ness ↓ Touch the corresponding i-DOS control panel again to return to the soft/medium 55 ml 75 ml 120 initial status.
  • Page 23: Appliance Settings

    Appliance settings Notes Appliance settings When dosing all detergents, ■ cleaning aids and cleaning agents, Y ou can change the following settings always follow the manufacturer's A p p l i a n c e s e t t i n g s in the control and display panel: instructions.
  • Page 24: Changing The Brightness Of The Touch

    Sensors Changing the brightness of Sensors the touch display A utomatic load sensing Touch œ again. The display for the S e n s o r s touch display's brightness B and the The automatic load sensing function preset brightness light up. adapts the water consumption ideally to each programme depending on the Change the adjustment value by...
  • Page 25: Cleaning And Maintenance

    Cleaning and maintenance Remove the detergent residue ■ Cleaning and immediately. Do not clean with a water jet. maintenance ■ Drum Warning C l e a n i n g a n d m a i n t e n a n c e Danger of death! Use chlorine-free cleaning agents, do There is a risk of electric shock if you...
  • Page 26 Cleaning and maintenance c) To empty the dispensers, Caution! carefully pull off each of the Risk of damage to the detergent sealing plugs and empty the drawer. contents into a suitable container. The detergent drawer contains electrical components. These may become damaged if they come into contact with water.
  • Page 27: The Drain Pump Is Blocked, Emergency Draining

    Cleaning and maintenance h) Clean the inside of the detergent- drawer housing. i) Push the detergent drawer in completely. Carefully unscrew the pump cover; remaining water may leak out. Clean the interior, pump cover thread and pump housing. The impeller in the drain pump must be able to rotate.
  • Page 28: Filter In The Water Supply Blocked

    Cleaning and maintenance Clean the drain hose and siphon b) For standard and Aqua-Secure connecting piece. models, clean the filter on the rear of the appliance: Disconnect the hose from the rear of the appliance. Use pliers to remove the filter and then clean it.
  • Page 29: Faults And What To Do About Them

    Faults and what to do about them. Wait until the drum has stopped turning. Faults and what to do Caution! about them. Water damage Any escaping water may cause water E mergency release damage. F a u l t s a n d w h a t t o d o a b o u t t h e m . E.g.
  • Page 30 Faults and what to do about them. Display Cause/remedy ù lights up Detergent drawer has been pulled out. r lights up Water pressure too low, may increase the programme duration. r flashes No water supply: Turn the tap on fully, ■...
  • Page 31: Faults And What To Do About Them

    Faults and what to do about them. Faults and what to do about them. Faults Cause/remedy Water is running out. Attach the drain hose correctly or replace it. ■ Tighten the threaded joint on the inlet hose. ■ Water not flowing in. Programme does not start? ■...
  • Page 32 Faults and what to do about them. Faults Cause/remedy The length of the pro- Not a fault – the programme sequence is optimised for the specific washing gramme changes during process. This may change the length of the programme shown on the display the wash cycle.
  • Page 33: After-Sales Service

    After-sales service After-sales service Technical data I f you cannot rectify a fault yourself, D imensions: A f t e r - s a l e s s e r v i c e T e c h n i c a l d a t a contact customer services.
  • Page 34: Positioning And Connecting

    Positioning and connecting P Water supply hose on standard/Aqua- Positioning and Secure models connecting *depending on the model I ncluded with the appliance In addition, a hose clamp ( 24 - 40 mm P o s i t i o n i n g a n d c o n n e c t i n g diameter, available from specialist Check the machine for transport Note:...
  • Page 35: Installation Surface

    Positioning and connecting leaks and water damage, you must Installing the appliance in a follow the instructions in this section. kitchenette Notes Warning In addition to the safety information ■ Danger of death! listed here, the local water and There is a risk of electric shock if you electricity supplier may have special touch live components.
  • Page 36: Hose And Cable Lengths

    Positioning and connecting Unscrew and remove all four transport brace screws. Remove the sleeves. To do this, remove the mains cable from the holders. The following are available from Tip: specialist dealers/the after-sales service: An extension for Aqua-Stop or cold ■...
  • Page 37: Water Outlet

    Positioning and connecting Only tighten the screw connections Open the water tap carefully, Note: ■ by hand. If the screw connections checking the leak tightness of the are tightened too much with a tool connection points. The screw (pliers), the thread may be connection is under mains water damaged.
  • Page 38: Levelling

    Positioning and connecting diameter of 24–40 mm (available Tighten the lock nut against the from specialist dealers). housing. In doing so, hold the foot tight and do not adjust its height. The lock nuts on all four appliance feet must be screwed tightly against the housing.
  • Page 39: Before Washing For The First Time

    Positioning and connecting The mains cable is only replaced by Run the programme without laundry. ■ a qualified electrician (if this is Switch on the appliance. necessary). Replacement mains Close the door (do not load any cables are available from the after- laundry).
  • Page 40: Aqua-Stop Warranty

    Aqua-Stop warranty Fitting the transportation securing Aqua-Stop warranty means: Remove the covers and keep them in a safe place. O nly for appliances with Aqua-Stop If required, use a screwdriver. A q u a - S t o p w a r r a n t y In addition to warranty claims against the vendor based on the purchase agreement and to our appliance...
  • Page 42 Free and easy registration – also on mobile phones: www.bosch-home.com/welcome Looking for help? You´ll find it here. Expert advice for your Bosch home appliances, need help with problems or a repair from Bosch experts. Find out everything about the many ways Bosch can support you: www.bosch-home.com/service Contact data of all countries are listed in the attached service directory.

Table of Contents