Table of Contents
to "Setting the oven function" and
"Changing the temperature").
2. Set the DURATION (refer to "Setting
the DURATION").
3. Touch
flashes in the display.
4. Touch
function.
The display shows
indicator. This indicator shows which
clock function is activated.
5. Touch a sensor field (apart from ON /
OFF) to start the SET+GO function.
7.6 Setting the MINUTE
MINDER
Use the MINUTE MINDER to set a
countdown (maximum 23 h 59 min). This
function has no effect on the operation
of the oven. You can set the MINUTE
MINDER at any time and also when the
appliance is off.
1. Touch
and "00" flash in the display.
2. Use
MINDER. First you set the seconds,
then the minutes and the hours.
8. AUTOMATIC PROGRAMMES
WARNING!
Refer to Safety chapters.
There are 20 automatic programmes.
Use an automatic programme or recipe
8.1 Automatic programmes
Programme number
1
2
3
4
5
6
again and again until
to set the SET+GO
and
with an
.
or
to set the MINUTE
Programme name
BRAISED MEAT
ROAST PORK
ROAST VEAL
ROAST LAMB
ROAST GAME
CHICKEN, WHOLE
3. Touch
or the MINUTE MINDER
starts automatically after five
seconds.
When the set time ends, an acoustic
signal sounds for two minutes and 00:00
and
flash in the display.
4. Touch a sensor field or open the
oven door to stop the acoustic
signal.
7.7 Setting the Time delay
function
The DURATION
used at the same time, if the appliance is
to be switched on and off automatically
later. In this case, first set the DURATION
and then the END
to "Setting the DURATION" and
"Setting the END" ).
When the Time delay
function is activated, the
display shows a static
symbol of the oven function,
with a dot and
dot shows which clock
function is on in the Clock /
residual heat display.
when you do not have the knowledge or
experience on how to prepare a dish.
The display shows the shelf position and
the default cooking times for all
automatic programmes.
ENGLISH
13
and END
can be
function (refer
. The
Table of Contents
