Table of Contents
POWER
TV/AV
POWER OPEN/CLOSE
TOP MENU
Joystick
PROG / CHECK
TOP WINDOW
SKIP
STOP
1
1
4
7
VCR Plus +
REC
REC MODE
TIME SLIP CM SKIP
ADD/DLT
DVD
A
1
2
3
4
5
6
7
8
9
0
B
1
STOP
2
PLAY
TV
CH
VOL
MENU
ENTER
RETURN
RETURN
STATUS
FRAME
SLOW/SEARCH
PAUSE
PLAY
2
2
3
Numbered
5
6
buttons
8
9
0
100
DVD
CH
CANCEL
INPUT
SELECT
LAST
LAST
V.S.S.
AUDIO
MARKER
MARKER
MARKER
TV
ACTION
WRITE
or
ENTER
ENTER
Playing discs
When a menu screen appears on the
A
television
Operate menus with the following operations. Actual operations de-
pend on the disc.
Press the numbered buttons to select an item (➡ page 8), or
move the joystick [ ,
,
,
[ENTER].
You can return to menus after you start play by
pressing [TOP MENU] or [MENU] (DVD-Video),
or [RETURN] (Video CD).
Note
Discs continue to rotate while menus are displayed. Press
[ , STOP] when you have finished viewing to preserve the unit's
motor and your television screen.
Volume may be lower when playing DVD-Video than when playing
other discs or during television broadcasts.
If you turn the volume up on the television or amplifier, ensure you
reduce the volume again before playing other sources or returning
to the television so that a sudden increase in output does not
occur.
For your reference
If "" appears on the television
The operation is prohibited by the unit or disc.
If a disc is loaded, the unit will come on and play will start when
you press [ , PLAY].
If you play a disc with video and then replace it with an audio-only
disc, the video from the previous disc may continue to be shown
on the television.
Starting play from where you
B
stopped it (Resume Function)
1
During play
Press [ , STOP].
The unit remembers the position.
2
Press [ , PLAY] while "PLAY" is
flashing on the display.
Play starts from where you stopped it.
To cancel the resume function
Press [ , STOP] until "PLAY" goes out.
(The position is also cleared when you turn the unit off.)
To start play from a memorized position after
turning the unit off
Press [LAST MARKER] during play.
(The message "Position Memorized" appears on the television.)
Now when you press [ , PLAY] after switching the unit to standby
and back on, play starts from the memorized position.
For your reference
If you press [ , STOP] before switching the unit to standby after
pressing [LAST MARKER] to memorize a position, play will
resume from the position you pressed [ , STOP] when you press
[ , PLAY].
The position memorized when you press [ , STOP] is cleared
when you switch the unit to standby or if the unit switches to stand-
by automatically (➡ page 82, ACTION—Set Up—Off Timer).
The position is memorized when you press [ , STOP] or
[LAST MARKER] and cleared when you open the disc tray.
The last marker is written to the disc and remains intact until you
mark a different position.
You cannot mark positions if the disc is write-protected with DISC
SETTING (➡ page 52) or with the write-protect tab (➡ page 99).
Release the protection before marking another position.
] to select an item and press
!?
TOP
TOP
23
RQT6035
Hide quick links:
Table of Contents
