DeWalt DCD460T2 Manual
  1. Manuals
  2. Brands
  3. DeWalt Manuals
  4. Drill
  5. DCD460T2
  6. Manual

DeWalt DCD460T2 Manual

Hide thumbs Also See for DCD460T2:
Table of Contents

Quick Links

Definitions: Safety Guidelines
The definitions below describe the level of severity for each signal word. Please read the manual and pay attention to
these symbols.
DANGER: Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.
WARNING: Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
CAUTION: Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.
NOTICE: Indicates a practice not related to personal injury which, if not avoided, may result in property damage.
FIG. A
1
2
6
Bail handle
1
Speed selector lever
2
Forward/reverse button
3
Trigger switch
4
Bail handle bolt
5
1/2" (13 mm) keyed chuck
6
E-Clutch
®
indicator
7
Main handle
8
Worklight
9
Chuck key
10
5
if you have any questions or comments about this or
any D
1-800-4-D
7
3
4
8
WARNING! Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
WARNING: To reduce the risk of injury, read the
instruction manual.
WALT tool, call us toll free at:
e
WALT (1-800-433-9258).
e
English
10
9
1
Table of Contents
loading

Related Manuals for DeWalt DCD460T2

Summary of Contents for DeWalt DCD460T2

  • Page 1 English Definitions: Safety Guidelines The definitions below describe the level of severity for each signal word. Please read the manual and pay attention to these symbols. DANGER: Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. WARNING: Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.

  • Page 2: General Power Tool Safety Warnings

    English GENERAL POWER TOOL SAFETY WARNINGS protection used for appropriate conditions will reduce personal injuries. WARNING! Read all safety warnings and all c ) Prevent unintentional starting. Ensure the instructions. Failure to follow the warnings and switch is in the off position before connecting to instructions may result in electric shock, fire and/or power source and/or battery pack, picking up or serious injury.

  • Page 3: Additional Safety Information

    English 5) Battery Tool Use and Care • crystalline silica from bricks and cement and other masonry products, and a ) Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type • arsenic and chromium from chemically- of battery pack may create a risk of fire when used treated lumber.

  • Page 4: Important Safety Instructions For All Battery Packs

    English procedures outlined.When ordering replacement battery carry-on baggage UNLESS they are properly protected packs, be sure to include the catalog number and voltage. from short circuits. So when transporting individual battery packs, make sure that the battery terminals Your tool uses a D WALT charger.

  • Page 5: Important Safety Instructions For All Battery Chargers

    WALT (1-800-433-9258) or the gauge number of the wire, the greater the capacity visit our website www.dewalt.com. of the cable, that is, 16 gauge has more capacity than 18 gauge. An undersized cord will cause a drop in line voltage The RBRC®...

  • Page 6: Charger Operation

    English Charger Operation electric shock. Removing the battery pack will not reduce this risk. Refer to the indicators below for the charge status of the • NEVER attempt to connect 2 chargers together. battery pack. • The charger is designed to operate on standard DCB101 120V household electrical power.

  • Page 7: Wall Mounting

    English Wall Mounting is no battery pack in the cavity. Unplug the charger before attempting to clean. DCB107, DCB112, DCB113, DCB115, DCB118 6. Do not freeze or immerse the charger in water or any These chargers are designed to be wall mountable or to other liquid.
  • Page 8 English Bail Handle (Fig. E) The bit rotates clockwise when the tool is in the forward position and counterclockwise when the tool is in the A bail handle is provided for carrying the tool and for  1  reverse position. If the bit binds, the tool will slow to a use as an additional handle.

  • Page 9: Operation

    English Variable Speed Trigger Switch (Fig. A) Worklight (Fig. A) Depressing the variable speed trigger switch turns the CAUTION: Do not stare into worklight. Serious eye  4  tool on, releasing the variable speed trigger switch turns injury could result. the tool off. The variable speed trigger switch permits speed The worklight is located on the foot of the tool.

  • Page 10: Maintenance

    1-800-4-D WALT (1-800-433-9258) or visit our website: Drilling in Metal www.dewalt.com. Start drilling with slow speed and increase to full power while applying firm pressure on the tool. A smooth even flow of metal chips indicates the proper drilling rate. Use a cutting lubricant when drilling metals.

  • Page 11: Register Online

    LOW SPEED HIGH SPEED after purchase. 0–300 0–1250 2 YEARs FREE sERViCE On DEWAlT BATTERY PACKs WOOD, FLAT BORING 1-1/2" – DC9071, DC9091, DC9096, DC9182, DC9280, DC9360, (38 mm)

  • Page 12: Définitions : Lignes Directrices En Matière De Sécurité

    FREnCh Définitions : lignes directrices en matière de sécurité Les définitions ci-dessous décrivent le niveau de danger pour chaque mot-indicateur employé. Lire le mode d’emploi et porter une attention particulière à ces symboles. DANGER : indique une situation dangereuse imminente qui, si elle n’est pas évitée, entraînera la mort ou des blessures graves.

Table of Contents