Related Manuals for Huawei ETS2528
Summary of Contents for Huawei ETS2528
- Page 1 Wonderful Communication, Mobile Life. Welcome to HUAWEI ETS2528 Fixed Wireless Terminal. HUAWEI ETS2528 Fixed Wireless Terminal User Manual...
- Page 2 No part of this manual may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd. Trademarks And HUAWEI are trademarks of Huawei Technologies Co., Ltd. All other trademarks and trade names mentioned in this manual are the property of their respective holders.
-
Page 3: Table Of Contents
Table of Contents 1 Warnings and Precautions...................3 2 Introduction ......................7 DOC document ....................7 Packing List....................7 Appearance of the FWT ................8 Icons......................11 3 Installation......................12 Installing the UIM Card (Optional)............12 Installing the Power Adapter or the Spare Battery ........13 Installing the Antenna ................14 Validating ....................15 4 Basic Operations....................16 Powering the FWT On or Off..............16... - Page 4 Searching for a Contact ................25 Editing a Contact..................25 Deleting a Contact..................26 Copying a Contact..................26 Groups......................27 Memory Status ...................27 Saving My FWT Number................27 8 Settings......................28 Call Settings ....................28 Profile Settings...................29 Operations During a Call................30 Security Settings ..................30 9 Fun & Utility ....................32 10 Menu Commands ...................33 11 Maintenance and Troubleshooting..............35 Maintenance ....................35...
-
Page 5: Warnings And Precautions
Warnings and Precautions Before using HUAWEI Fixed Wireless Terminal (hereinafter referred to FWT), please read the following cautions and let your children know these, so that you can use your FWT correctly and safely. Basic Cautions According to the packing list, check items in the package box to make sure they are complete and undamaged. - Page 6 FWT. You must bear any consequence resulted from the operation without permission Your FWT is designed to conform to the authoritative international radio frequency (RF) specifications. Use FWT accessories approved by Huawei only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons.
- Page 7 essential communications. Battery If the battery fluid gets into eyes, do not rub them. Wash with clean water and seek medical assistance immediately. If the battery fluid contacts skin or cloth, wash with clean water immediately to avoid irritation to the skin. Do not dispose of the battery in fire.
- Page 8 This equipment has been tested and found to comply with the limits for a Class B NOTE: digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
-
Page 9: Introduction
The FWT package box contains the following items. If any of the items is lost or damaged, contact your local dealer. Item Quantity Item Quanti Handle set, handset, and coiled handset Spare cord battery Power adapter Antenna (optional) HUAWEI ETS2528 Fixed Wireless Terminal User manual, Certificate of Quality, and Warranty Card Table 1-5... -
Page 10: Appearance Of The Fwt
Appearance of the FWT Front View of the FWT Item Description Indoor antenna To receive signals. Display To display information. Left function key In the standby mode, press it to access the home screen. In the non-standby mode, press it to perform the operation displayed on the lower left corner of the display. - Page 11 Item Description Scroll key Up key: In the standby mode, press it to view the schedule.; during a call, press it to increase the volume. Down key: In the standby mode, press it to set FM or alarm clocks,; during a call, press it to decrease the volume.
- Page 12 Item Description # key In the standby mode, press and hold it to lock the FWT. Press it to perform corresponding operations of functions. * key In the standby mode, press and hold it to activate the quiet profile. Press it to perform corresponding operations of functions.
-
Page 13: Icons
Item Description Battery cord jack To connect to the battery cord. Handset coiled cord jack To connect to the handset coiled cord. on the handle set Handset coiled cord To connect to the handset to the handle set. Handset coiled cord jack To connect to the handset coiled cord. -
Page 14: Installation
Installation Installing the UIM Card (Optional) Caution: Whether a user identity module (UIM) card is needed depends on your service provider. Consult your service provider for details. The UIM card and its golden contact can be easily damaged by scratch or bending. -
Page 15: Installing The Power Adapter Or The Spare Battery
Installing the Power Adapter or the Spare Battery Note: The FWT can be powered by the power adapter or the spare battery. If the FWT installed with the spare battery is powered by the power adapter, the spare battery is automatically charged. After the spare battery is fully charged, the charging stops. -
Page 16: Installing The Antenna
Removing the Spare Battery Press and hold to power your FWT off and then disconnect the FWT from the power socket. Then remove the battery house cover. Disconnect the battery cord and take out the spare battery. Installing the Antenna Installing the Indoor Antenna Power your FWT off and disconnect the FWT from the power socket. -
Page 17: Validating
Vertically 1. Pull out the hook from the slot and turn it around. Then push it back so that the handset will not fall down when FWT is placed vertically. 2. According to the distance between the two hooks (7.7 cm), hammer two nails into the wall with a 3 mm end left outside. -
Page 18: Basic Operations
Basic Operations Powering the FWT On or Off When the FWT is powered off, press and hold to power it on. In the standby mode, press and hold to power it off. Making a Call Making a Call Through the Keypad 1. -
Page 19: Answering A Call
3. If a number key is not assigned to a contact, press to select a contact from the phone book. 4. If a number key is assigned to a contact, press for the following options: Change: Change a contact. Delete: Delete the contact. Answering a Call In the standby mode, you can lift the handset, press ,press... - Page 20 Select Menu > Settings > Phone Settings > Keyguard. Press the up/down key to select: Off: Deactivate the keyguard function. 30 Seconds, 2 Minutes or 5 Minutes: Set the FWT to lock automatically if there is no operation in 30 seconds, 2 minutes or 5 minutes. Unlocking the Keypad Press .
-
Page 21: Text Entry
Text Entry Text Input Mode While entering text, you can press the # key to change the input mode. The following table lists the input modes and their indicators. Indicator Text Input Mode eZiEn Smart English English upper case English lower case Numbers Note: In the edit mode, press... - Page 22 Note: After you enter several letters, the FWT can give other letters to make out the candidate words. Press the up/down key or the * key to scroll the words and press the right key to confirm; or press number keys to enter letters. Press the 1 key to enter a full stop.
-
Page 23: Messages
Messages Writing and Sending a Message 1. Select Menu > Messages > Write Message. 2. Write the message. You can enter up to 160 English letters. When writing the message, you can press for the following operations: Insert Template: Insert a commonly used phrase. Insert Phone Number: Insert a contact from the phone book. -
Page 24: Deleting A Message
4. Press (Options) to select Reply, Delete, Forward, Call or Save Number. Viewing the Outbox and the Draft The outbox stores messages that are sent successfully. You can delete, forward or re-send a message in the outbox. The draft stores drafts and messages that are not sent successfully. You can edit, send or delete messages in the draft. -
Page 25: Message Settings
Clearing the Voice Mail Notification 3. Select Menu > Messages > Voice Mail. 4. Select Clear Voice Mail Notification and press (Select). Message Settings Setting a Template Your FWT provides 10 commonly used phrases. You can insert these phrases when you edit a message and customize the phases. 1. - Page 26 On: Activate the auto delete function. If the memory in use is full and there is a new message, the FWT automatically deletes the earliest message. Off: Deactivate the auto delete function. If the memory in use is full, the FWT cannot receive messages.
-
Page 27: Phone Book
Phone Book Adding a Contact A contact is saved to the memory in use. 1. Select Menu > Phone Book > Add New. 2. Enter the name, and press (OK). 3. Set other options: If the memory in use is the FWT, you can set: Name, General Number, Home Number, Office Number, and Memo (you need to set at least one phone number). -
Page 28: Deleting A Contact
Deleting a Contact Delete a Contact 1. Select Menu > Phone Book > Search to search for a contact to delete. 2. Press (Options) and select Delete. 3. Press (Yes) to delete the contact or press (No) to cancel. Delete All Contacts 4. -
Page 29: Groups
Groups You can sort contacts into different groups for easy management. You can set up to 10 groups. Each group can contain up to 50 contacts. 1. Select Menu > Phone Book > Groups. 2. Press the up/down key to scroll up or down the groups. 3. -
Page 30: Settings
Settings Call Settings Minute Alert With the minute alert function activated, your FWT notifies you of the call duration by giving an alert 10 seconds before the end of each minute. 1. Select Menu > Settings > Call Settings > Minute Alert. 2. -
Page 31: Profile Settings
Select Menu > Settings > Call Settings > Call Forwarding: All: Forward all incoming calls. Busy: Forward an incoming call if your FWT number is in a call. No Answer: Forward an incoming call if nobody answers the FWT or you want to reject the incoming call. -
Page 32: Operations During A Call
Operations During a Call During a call, press to select the following options: Save Number: Enter a phone number and save it to the phone book. Phone Book: Access the Phone Book screen. Messages: Access the Messages screen. Third Party Call: The function is network dependent. For details, consult your service provider. - Page 33 If you enter wrong PUK codes 10 times consecutively, the UIM card is invalidated. Contact your service provider to retrieve a new card. If you enter wrong PUK code several times, consult your service provider for the correct PUK code. If the PIN code is activated, you are required to enter the PIN code every time you power on the FWT.
-
Page 34: Fun & Utility
Fun & Utility Alarm Clock After the alarm clock is activated, it rings at the specified time when your FWT is powered on. You can set up to five alarm clocks. 1. Select Menu > Fun&Utility > Alarm. 2. Press the up/down key to scroll up or down the alarm clocks. 3. -
Page 35: Menu Commands
Menu Commands Phone Book See "Phone Book" on page 25. Messages See "Messages" on page 21. Call History Press the up/down key to scroll up or down the records Missed Calls (up to 20). Received Calls Press to dial a record. You can save, delete or send a message to a record. - Page 36 Stopwatch Your FWT provides the stopwatch function, which can record a time up to 9 hours 59 minutes 59 seconds and 990 milliseconds. World Clock You can view the Greenwich Mean Time (GMT), current time of other 31 major time zones around the world, and Beijing Time.
-
Page 37: Maintenance And Troubleshooting
Maintenance and Troublesho oting Maintenance 1. Place the FWT in a clean and dry environment. The temperature of the place should be no higher than 55°C or lower than -10°C. 2. If the FWT is covered with dust, please clean it with clean fine cloth. Do not clean it with cleanser or other chemical solvents. - Page 38 Time is not displayed. 1. Make sure that the antenna is installed properly. 2. Adjust the antenna direction or move the FWT to the place covered with better signal strength. 3. If time is still not displayed, contact your service provider to check whether the FWT is in the signal coverage area.
-
Page 39: Specifications
Specifications Item Description Frequency Band 1900 M(ETS2528) × × 205 mm × 184 mm × 65 mm Dimensions (W Weight About 630 g Mounting mode Horizontal or wall mounting Input voltage* AC: 120 V DC: 12V DC Spare battery Type: NiMH Capacity: 3.6 V 1000mAh...