Contents 1 Important Help and support Safety Care for your product Care of the environment 2 Your product Main unit Remote control Connectors 3 Connect Placement Connect audio from TV and other devices 6 4 Use your product Adjust the volume Choose your sound MP3 player USB storage devices...
• Disconnect the product from the power For extensive online support, visit outlet before lightning storms. www.philips.com/support to: • When you disconnect the power cord, • download the user manual and the quick always pull the plug, never the cable.
Risk of overheating! Care for your product • Never install this product in a confined space. Always leave a space of at least four Use only microfiber cloth to clean the product. inches around the product for ventilation. Ensure curtains or other objects never cover the ventilation slots on the product.
Remote control This section includes an overview of the Congratulations on your purchase, and remote control. welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. Main unit This section includes an overview of the main unit.
Connectors Mute or restore volume. e BASS +/- This section includes an overview of the Increase or decrease bass. connectors available on this product. f NIGHT / PROGRAM • Turn night mode on or off. • In radio mode, press and hold for three seconds to reinstall the radio stations.
3 Connect Connect audio from TV and other devices This section helps you connect this product to a Play audio from TV or other devices through TV and other devices. this product. For information about the basic connections of Use the best quality connection available on this product and accessories, see the quick start your TV and other devices.
Before you start • Make the necessary connections described in the Quick Start Guide or download the User Manual from www.philips.com/support. • Switch this product to the correct source Using an analog cable, connect the AUX for other devices. connectors on this product to the AUDIO OUT connectors on the TV or other device.
Using the 3.5mm stereo audio cable, Equalizer connect the MP3 player to the AUDIO IN connector on this product. Change the high frequency (treble) and low frequency (bass) settings of this product. Press AUDIO IN. Press TREBLE +/- or BASS +/- to change Press the buttons on the MP3 player to the treble or bass.
Apply factory settings blinking. On the Bluetooth device, switch on You can reset this product to the default setting Bluetooth, search for and select Philips mode. HTL1193B to start connection (see the user manual of the Bluetooth device on In mute mode, quickly press AUX two how to enable Bluetooth).
Page 12
Press briefly PROGRAM. Auto install radio stations » a number blinks on the display panel. Press RADIO to switch to radio source. Press to allocate a number to this » If you have not installed any radio ration station. stations, the message AUTO INSTALL Press to confirm.
3 seconds, and then the factory setting is restored. Update software via USB Check the latest software version on www.philips.com/support. • Search for your model and click on "Software and drivers". Download the software into a USB flash drive.
6 Wall mount 7 Product specifications Note • Before wall mounting, make sure the wall can support Note the weight of this product. • For wall mounting, this product must be securely • Specifications and design are subject to change without attached to the wall in accordance with the installation notice.
If you have problems using this product, check • Bluetooth version: 2.1 + EDR the following points before you request service. If you still have a problem, get support at Main unit www.philips.com/support. • Power supply: 100-240 V~, 50/60 Hz Main unit • Power consumption: 35 W •...
Page 16
• You have not enabled the Bluetooth function of the device. See the user manual of the device on how to enable the function. • The device is not correctly connected. Connect the device correctly. • This product is already connected with another Bluetooth device.
Page 17
Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. The Bluetooth word mark and logos are ® registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Gibson is under license. Other trademarks and trade names are those of their respective owners.
Page 18
This product has been manufactured by, and is sold under the responsibility of Gibson Innovations Ltd., and Gibson Innovations Ltd. is the warrantor in relation to this product. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license from Koninklijke Philips N.V.