Electric height-adjustable standing desk (24 pages)
Summary of Contents for Seville Classics airLIFT OFF65951B
Page 1
Glass & Wood Height Adjustable Standing Desk Models: OFF65951B Thank you for choosing Seville Classics! We hope that you enjoy your new sit-to-stand desk. Please read through this user guide for parts list, instructions, frequently asked questions and contact information.
Page 2
® regarding your airLIFT Electric Height Adjustable Standing Desk. ® Thank you for choosing Seville Classics ! We hope you will enjoy this desk for many years to come. Post Setup Quick Start Instructions Once your desk has been put together or when reset (initialization) is necessary: 1).
Table of Contents SAFETY INSTRUCTIONS……………………………………………………………… QUICK SETUP……………………………………………………………………………. PARTS LIST………………………………………………………………………………... TOOLS & HARDWARE LIST………………………………………………………... ASSEMBLY INSTRUCTIONS………………………………………………………... Unpack ....…………………………………………………………………………….. Install Brackets ...........………………………………………….. Install Legs ..........……………………………………………. Connect Motor ...........…………………………………………. Final Steps ......………………………………………………………………….. INITIALIZATION & USE INSTRUCTIONS……………………………………… TROUBLESHOOTING…………………………………………………………………. WARRANTY INFORMATION………………………….……………………………. FCC INFORMATION…………………………………………………………………… CUSTOMER SERVICE INFORMATION…………………………………………. Get help with assembly and report damaged or missing parts.
Safety Instructions FAILURE TO COMPLY WITH OR OBSERVE ALL ASSEMBLY, SAFETY AND OPERATING INSTRUCTIONS AND WARNINGS REGARDING THE USE OF THIS PRODUCT MAY RESULT IN SERIOUS BODILY INJURY Read and understand this manual before attempting to install or • Assure that everyone who uses this product is informed of the contents of this manual. This •...
Quick Setup Diagram Setup should take about 15 minutes to complete. All required tools are included. Keep the frame with tempered glass top in the box during assembly to protect it from scratches. Foot Legs/Beam Motor Bracket Power Supply Control Box Frame with Tempered Glass Top LED Control...
Parts List A. Frame with Tempered Glass Top (LED Control Panel, and Power Supply attached) (1) B. Legs/Beam (Motor attached) (1) C. Brackets (2) D. Feet (2) Tools & Hardware List E. M6 x 12 Screws (8) F. M8 x 16 Screws (8) G.
Assembly Instructions: Unpack Remove the box lid and remove inner box containing parts. Leave the frame with tempered glass top in the TOP section of the box. Layout all components and hardware. Examine each and make sure components are without damage. Feet (x2) Pre-assembled Legs/ Beam (x1)
Assembly Instructions: Attach Support Brackets to Legs/Beam using the M6 x 12 screws. STEP 1. Attach BRACKETS (C) to sides of LEGS/BEAM (B) with M6 x 12 SCREWS (E) using 4 mm HEX KEY (G). You should now have an assembled unit as pictured below. Get help with assembly and report damaged or missing parts.
Assembly Instructions: Frame with Tempered Glass Top to Legs/Beam STEP 2. Align FRAME WITH TEMPERED GLASS TOP (A) to the FRONT, the LED Control Panel should be facing you. Center the holes on BRACKETS (C) and attach with M6 x 12 SCREWS (E) using 4 mm HEX KEY (G).
Assembly Instructions: Connect Motor Cable to Control Box STEP 3. Plug in the Motor Cable from leg beam to Control Box as displayed in below figure. Control Box Motor Cable Get help with assembly and report damaged or missing parts. Email: [email protected] Telephone: 1 (800) 323-5565 Hours: 8:30 AM - 4:30 PM (PST)
Assembly Instructions: Final Steps STEP 4. Attach FEET (D) to the bottom of table legs with four M8 x 16 SCREWS (F) using 5 mm HEX KEY (H). Tip! Take time to make sure all screws have been tightened. STEP 5. With the assistance of another person, lift and tilt the table onto its feet. Lift with 2 people Remove tape TIP: Adjust the leveling feet by...
Use Instructions DESK MUST BE INITIALIZED BEFORE FIRST USE Save Memory Memory Display Up Arrow Down Arrow USB Charging Port Initialize & Reset Once your desk has been put together or when reset (initialization) is necessary: 1). Press & Hold the Down Arrow until the desk reaches the lowest position and/or stops moving. 2).
Troubleshooting Problem Action Desk does not go up or down and the Check all connections. Make sure power cord is plugged into the control box LED control panel does not illuminate and a power outlet. Press any button on the when any button is pressed.
The liability of Seville Classics under the warranty shall be limited to the amount paid by the customer for the product. Seville Classics shall not be liable for any loss of use of the product, or other incidental or consequential costs, expenses or damages incurred by the customer or other user.
NOTE: This equipment has been tested and found to comply with the limits for Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:...