Page 2
Device and humidifier overview # Device feature Therapy On/Off button Ambient light sensor Ramp button Door, SD card and filter access # Device feature Display screen Humidifier 6 Control dial Air inlet port Door, accessory access Air outlet port Humidifier connector Humidifier lid release latch 9 Air outlet port Water tank...
Page 3
Humidification set-up Step 1 Step 3 Line up the back of the therapy device to the front (top lid Remove the tank (1) by grabbing both sides of tank and lifting release latch side) of the heated humidifier. Slide the two units out of the humidifier base.
Page 4
Therapy set-up When therapy is on While the device is delivering therapy, you can adjust tube temperature or humidifier 19 2 settings. Rotate the control dial To start therapy to choose either setting. Press and rotate the dial to change Supply power to the device.
Patient menu In the patient menu, you can choose between the following In this sub-menu, patients can access screens. information related to their therapy (therapy hours, mask fit, and if enabled AHI, PB and P90%). My info From this icon, patients can pre-heat their humidifer for 30 minutes before therapy starts.
Additional features Check mask fit Performance check device Sleep progress This feature allows patients to screening tool The device provides summary check mask fit prior to starting Performance check allows you to information about your patient’s therapy. quickly evaluate a therapy therapy use each time the therapy device remotely.